Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 06-21-2012, 02:12 PM   #1
07sitos13
 
Join Date: Jun 2012
Location: sumter sc
Age: 34
Posts: 17
Trader Rating: (0)
07sitos13 is an unknown quantity at this point
Feedback Score: 0 reviews
ka24 injector help!

yes ive searched and dont know what else to do... most threads is about the the #3 injector but my #1 cylinder keeps going dead. ive replaced the injector with a used one and it worked for about a week but it ended up not working again so i replaced it with a brand new injector and it still doesnt work. i know its not a spark problem because ive replaced the plug, wires, cap, and rotor, tested it and it has great spark but you can pull the injector plug and the idle doesnt change. unplug any of the others and the idle changes..... its a brand new injector, could it be the wiring or what?

also i havent checked the ohms on the plug yet. should do it tonight i hope. and the only other ecu i have is a rb25 so i cant test another one right now..... also havent checked for any codes yet. will do asap. any help would be awsome though!
07sitos13 is offline   Reply With Quote
Sponsored Links
Old 06-21-2012, 02:35 PM   #2
mr2gons14
Zilvia Addict
 
mr2gons14's Avatar
 
Join Date: Jun 2011
Location: Phoenix, AZ
Age: 30
Posts: 639
Trader Rating: (7)
mr2gons14 is an unknown quantity at this point
Feedback Score: 7 reviews
well if u pull the plug from the injector and the idle doesnt change that means its problem with the wiring or connector. Test the wires that are going to the injector make sure its getting a signal. If it is try getting some electrical parts cleaner and spray the connector to make sure its not just nasty and gunked up
__________________
zilvia.net/f/cars-sale/517359-95-240sx-sr20-swap-uras-greddy-apexi-ect.html
mr2gons14 is offline   Reply With Quote
Old 06-21-2012, 03:46 PM   #3
ka4life87
Leaky Injector
 
Join Date: Jun 2012
Location: casa grande
Posts: 104
Trader Rating: (0)
ka4life87 is an unknown quantity at this point
Feedback Score: 0 reviews
On the injector connector, check with meter one wire should be switched 12 volts and the ground the computer triggers, check that corresponding ground to ecu make sure there is no short in between or bad ground, ground or voltage spikes can overheat injector coil or damage ecu
ka4life87 is offline   Reply With Quote
Old 06-21-2012, 04:02 PM   #4
07sitos13
 
Join Date: Jun 2012
Location: sumter sc
Age: 34
Posts: 17
Trader Rating: (0)
07sitos13 is an unknown quantity at this point
Feedback Score: 0 reviews
ill check the voltage later tonight and see whats goin on. thanks for the input.
07sitos13 is offline   Reply With Quote
Old 06-25-2012, 08:14 PM   #5
Butcher240sx
Zilvia Member
 
Butcher240sx's Avatar
 
Join Date: Oct 2010
Location: Houston Texas
Age: 40
Posts: 157
Trader Rating: (0)
Butcher240sx is an unknown quantity at this point
Feedback Score: 0 reviews
Possibly the injector driver going out in the ecu. Check all your grounds.
__________________
Don't Mess With Texas
Butcher240sx is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™