KA24DE 91 240sx ticking and wont rev past 3000 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ram22alaniz · 10-19-2019, 03:39 PM

I have recently installed a used engine in my 240. Finally got the distributor set and its started up. My only problem now is it wont rev past 3000rpm and i hear a ticking noise to be coming form the valve cover. Any ideas on my next step to bringing my baby back from the grave? I couldnt figure out how to upload my video from my iphone but i could email to anyone willing to help me through this. Thanks!

ram22alaniz · 10-19-2019, 03:46 PM

Just cleaned the MAF and now it rev prefectly. Only this is it deffinatly has a ticking noise and im scared to drive it.

andisan · 10-19-2019, 04:01 PM

Mine has a tick sound too but I feel like it’s normal for an old engine, now if it’s super loud then I would look into it

Sent from my iPhone using Tapatalk

ram22alaniz · 10-19-2019, 04:02 PM

Yeah im gonna take it for a spin and see how it drives. I just hope its not a bad "tick" and im not sure how to look into it.

andisan · 10-19-2019, 04:06 PM

It’s called valve slash, my buddy did it in his KA when he rebuild it

If it sounds loud you might want to look into that

Sent from my iPhone using Tapatalk

S14rebuild · 10-19-2019, 04:06 PM

Start it up with the valve cover off....then listen for noise

jedi03 · 10-21-2019, 08:50 AM

can also be the timing chain being loose...eg tensioner sticking or alternately the upper guide removed

ram22alaniz · 11-02-2019, 12:04 PM

So I reset the distributor and cleaned the MAF and she runs!!!!! Now I still have the ticking so I went ahead and checked my valve clearance. Everything seems to be close expect for cylinder 1. I have .008 and .012 for clearance on the intake valves and .012 and .014 on the exhaust valves. I guess I need to see if I can remove a shin from the intake bucket to get closer to .012

andisan · 11-02-2019, 05:39 PM

You have to find the right size shim to get the clearance

You have to see what size shim is In there then go to steps down

Sent from my iPhone using Tapatalk

ram22alaniz · 11-03-2019, 10:41 AM

I’m going to search today and see if I can find the old shins from my old engine. If not I guess I’ll have to order some. How can I tell if it’s the timing chain that’s making the noise and not the buckets? Also I’ve driven it around the block a few times and it doesn’t have too much throttle response. I think maybe my injectors might be gunked up. Was thinking about just ordering some cheapninjectors off rock auto.

Rashid.Yusuf.7 · 11-05-2019, 02:47 PM

Check if your exhaust manifold is leaking, I put a new gasket and sealed it up, also was missing 2 studs, I was getting ready to replace the rockers, but after sealing it right, no ticking

Sent from my Pixel 3 using Tapatalk

10-19-2019, 03:39 PM	#1
ram22alaniz Join Date: Oct 2019 Location: northern VA Age: 31 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	KA24DE 91 240sx ticking and wont rev past 3000 I have recently installed a used engine in my 240. Finally got the distributor set and its started up. My only problem now is it wont rev past 3000rpm and i hear a ticking noise to be coming form the valve cover. Any ideas on my next step to bringing my baby back from the grave? I couldnt figure out how to upload my video from my iphone but i could email to anyone willing to help me through this. Thanks!

10-19-2019, 03:46 PM	#2
ram22alaniz Join Date: Oct 2019 Location: northern VA Age: 31 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Update Just cleaned the MAF and now it rev prefectly. Only this is it deffinatly has a ticking noise and im scared to drive it.

10-19-2019, 04:01 PM	#3
andisan Nissanaholic! Join Date: Oct 2007 Location: Lompoc CA 805!!!! Age: 37 Posts: 2,049 Trader Rating: (12) Feedback Score: 12 reviews	Mine has a tick sound too but I feel like it’s normal for an old engine, now if it’s super loud then I would look into it Sent from my iPhone using Tapatalk __________________

10-19-2019, 04:06 PM	#5
andisan Nissanaholic! Join Date: Oct 2007 Location: Lompoc CA 805!!!! Age: 37 Posts: 2,049 Trader Rating: (12) Feedback Score: 12 reviews	It’s called valve slash, my buddy did it in his KA when he rebuild it If it sounds loud you might want to look into that Sent from my iPhone using Tapatalk __________________

11-02-2019, 12:04 PM	#8
ram22alaniz Join Date: Oct 2019 Location: northern VA Age: 31 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Update So I reset the distributor and cleaned the MAF and she runs!!!!! Now I still have the ticking so I went ahead and checked my valve clearance. Everything seems to be close expect for cylinder 1. I have .008 and .012 for clearance on the intake valves and .012 and .014 on the exhaust valves. I guess I need to see if I can remove a shin from the intake bucket to get closer to .012

10-19-2019, 04:02 PM	#4
ram22alaniz Join Date: Oct 2019 Location: northern VA Age: 31 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Yeah im gonna take it for a spin and see how it drives. I just hope its not a bad "tick" and im not sure how to look into it.

10-19-2019, 04:06 PM	#6
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	Start it up with the valve cover off....then listen for noise

10-21-2019, 08:50 AM	#7
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,784 Trader Rating: (8) Feedback Score: 8 reviews	can also be the timing chain being loose...eg tensioner sticking or alternately the upper guide removed

11-02-2019, 05:39 PM	#9
andisan Nissanaholic! Join Date: Oct 2007 Location: Lompoc CA 805!!!! Age: 37 Posts: 2,049 Trader Rating: (12) Feedback Score: 12 reviews	You have to find the right size shim to get the clearance You have to see what size shim is In there then go to steps down Sent from my iPhone using Tapatalk __________________

11-03-2019, 10:41 AM	#10
ram22alaniz Join Date: Oct 2019 Location: northern VA Age: 31 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	I’m going to search today and see if I can find the old shins from my old engine. If not I guess I’ll have to order some. How can I tell if it’s the timing chain that’s making the noise and not the buckets? Also I’ve driven it around the block a few times and it doesn’t have too much throttle response. I think maybe my injectors might be gunked up. Was thinking about just ordering some cheapninjectors off rock auto.

11-05-2019, 02:47 PM	#11
Rashid.Yusuf.7 Join Date: Jun 2012 Location: Jamaica Estates, N.Y. Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	Check if your exhaust manifold is leaking, I put a new gasket and sealed it up, also was missing 2 studs, I was getting ready to replace the rockers, but after sealing it right, no ticking Sent from my Pixel 3 using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode