Fitment Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

EliteDriftProductions · 04-10-2013, 10:38 PM

I wanna get 17x10 XXR 526 wheels for my hatch (4 lug) and the reason why is because its the only wheel I can find with a big lip that I like, I am just worried about the fitment..I asked a guy how they fit on his s13 since he was selling the exact setup I want, he just said I needed spacers (10-15mm) in the front to avoid the struts I think he was saying? (don't remember) anyways that's all he said I would need and should be fine. But I would imagine there's more too that then just some front spacer like rolling the fenders etc. I plan on saving for some PBM coils or Megans not sure yet heard great things about both, but anyways if any of you "fitment whores" know what to do or can help me id appreciate it thanks!

S13CoupeLover · 04-10-2013, 10:40 PM

know offset of the rim?

S13CoupeLover · 04-10-2013, 10:43 PM

can't find 526's in 17x10 in 4 lug only 5.

EliteDriftProductions · 04-10-2013, 10:59 PM

Quote:

Originally Posted by S13CoupeLover

can't find 526's in 17x10 in 4 lug only 5.

you look on ebay? and there a +20 offset.

http://http://www.ebay.com/itm/XXR-5...53f9ea&vxp=mtr

EliteDriftProductions · 04-10-2013, 11:00 PM

XXR 526 17 17x10 4x100 4x114 3 20 Chromium Black Wheels Rims s13 240sx | eBay

trxrx7 · 04-10-2013, 11:29 PM

there is a thread about fitment on here, but rolling fenders will be a must and coils probably too if you are planning on running 10" in the front you will need some camber unless you like the poke look!

EliteDriftProductions · 04-10-2013, 11:41 PM

I know I cant seem to find the thread so I figured the s-chassis would be my best bet. ok cool thanks, figured I would need to roll fenders and some coils too. I plan on getting a few degrees of - camber for drifting and it looks cool. But yea I just wanna know if its possible aha.

S13CoupeLover · 04-11-2013, 09:58 AM

10j +20, you'll need a roll maybe a little pull and you should be fine.

Also this should have been put into the small questions thread.

ultimateirving · 04-11-2013, 10:37 AM

OP. have you seen the Square Rims?
My buddy just put a set on his 13hatch and it looks great.
They fit well and he doesnt have coilovers(yet) or rolled fenders.
Let me see if i can find a pic

Here ya go,

The Dude · 04-11-2013, 12:26 PM

http://zilvia.net/f/chat/129865-whee...s-no-post.html

Go to this thread and search for xxr 526.

EliteDriftProductions · 04-14-2013, 07:41 PM

Quote:

Originally Posted by ultimateirving

OP. have you seen the Square Rims?
My buddy just put a set on his 13hatch and it looks great.
They fit well and he doesnt have coilovers(yet) or rolled fenders.
Let me see if i can find a pic

Here ya go,

These are the 17x10 526s? n no coils!? wow they look like they fit great haha thanks for the pictures it really helped

theStig880 · 04-15-2013, 07:20 AM

Pretty much what everyone else has said. Coilovers, roll the fenders, and camber up front to fit the 10s. Depending on how low you decide to go, you will also need to tuck the wiring harness up front and bang out the wheel wells with a hammer. Also a mild stretched tire, 225 or 235 ish, would help on clearance. And if your debating between pbms or megans, get the pbms. There so much nicer overall imo.

zerodameaon · 04-15-2013, 09:08 AM

Quote:

Originally Posted by EliteDriftProductions

I know I cant seem to find the thread so I figured the s-chassis would be my best bet. ok cool thanks, figured I would need to roll fenders and some coils too. I plan on getting a few degrees of - camber for drifting and it looks cool. But yea I just wanna know if its possible aha.

You did not search too hard. "Fitment question" netted me this as first result.
http://zilvia.net/f/chat/392494-whee...on-thread.html

04-10-2013, 10:38 PM	#1
EliteDriftProductions Leaky Injector Join Date: Jan 2013 Location: SoCal Age: 27 Posts: 106 Trader Rating: (3) Feedback Score: 3 reviews	Fitment Help I wanna get 17x10 XXR 526 wheels for my hatch (4 lug) and the reason why is because its the only wheel I can find with a big lip that I like, I am just worried about the fitment..I asked a guy how they fit on his s13 since he was selling the exact setup I want, he just said I needed spacers (10-15mm) in the front to avoid the struts I think he was saying? (don't remember) anyways that's all he said I would need and should be fine. But I would imagine there's more too that then just some front spacer like rolling the fenders etc. I plan on saving for some PBM coils or Megans not sure yet heard great things about both, but anyways if any of you "fitment whores" know what to do or can help me id appreciate it thanks! __________________ more tax returns = more car parts

04-10-2013, 10:40 PM	#2
S13CoupeLover Zilvia Junkie Join Date: Jan 2008 Location: Gardena, CA Age: 30 Posts: 327 Trader Rating: (10) Feedback Score: 10 reviews	know offset of the rim? __________________ Check outSyko Performance's new site! For your RB swap needs!

04-10-2013, 10:43 PM	#3
S13CoupeLover Zilvia Junkie Join Date: Jan 2008 Location: Gardena, CA Age: 30 Posts: 327 Trader Rating: (10) Feedback Score: 10 reviews	can't find 526's in 17x10 in 4 lug only 5. __________________ Check outSyko Performance's new site! For your RB swap needs!

04-10-2013, 11:00 PM	#5
EliteDriftProductions Leaky Injector Join Date: Jan 2013 Location: SoCal Age: 27 Posts: 106 Trader Rating: (3) Feedback Score: 3 reviews	XXR 526 17 17x10 4x100 4x114 3 20 Chromium Black Wheels Rims s13 240sx \| eBay __________________ more tax returns = more car parts

04-10-2013, 11:29 PM	#6
trxrx7 Leaky Injector Join Date: Feb 2013 Location: canada Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	there is a thread about fitment on here, but rolling fenders will be a must and coils probably too if you are planning on running 10" in the front you will need some camber unless you like the poke look! __________________ fd3s fc3s mr2 s13 s13 s13 s14 s13vert aristo2jzgte bmw-e46

04-10-2013, 11:41 PM	#7
EliteDriftProductions Leaky Injector Join Date: Jan 2013 Location: SoCal Age: 27 Posts: 106 Trader Rating: (3) Feedback Score: 3 reviews	I know I cant seem to find the thread so I figured the s-chassis would be my best bet. ok cool thanks, figured I would need to roll fenders and some coils too. I plan on getting a few degrees of - camber for drifting and it looks cool. But yea I just wanna know if its possible aha. __________________ more tax returns = more car parts

04-11-2013, 09:58 AM	#8
S13CoupeLover Zilvia Junkie Join Date: Jan 2008 Location: Gardena, CA Age: 30 Posts: 327 Trader Rating: (10) Feedback Score: 10 reviews	10j +20, you'll need a roll maybe a little pull and you should be fine. Also this should have been put into the small questions thread. __________________ Check outSyko Performance's new site! For your RB swap needs!

04-11-2013, 10:37 AM	#9
ultimateirving Zilvia FREAK! Join Date: Nov 2010 Location: arizona Age: 33 Posts: 1,519 Trader Rating: (1) Feedback Score: 1 reviews	OP. have you seen the Square Rims? My buddy just put a set on his 13hatch and it looks great. They fit well and he doesnt have coilovers(yet) or rolled fenders. Let me see if i can find a pic Here ya go, __________________ Z32 with lq4 swap Desert Street Scene \|\| Dssevents.com

04-11-2013, 12:26 PM	#10
The Dude Zilvia Junkie Join Date: Sep 2003 Location: TN Age: 36 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	http://zilvia.net/f/chat/129865-whee...s-no-post.html Go to this thread and search for xxr 526.

04-15-2013, 07:20 AM	#12
theStig880 Zilvia Junkie Join Date: May 2012 Location: Wilson, NC Age: 26 Posts: 338 Trader Rating: (4) Feedback Score: 4 reviews	Pretty much what everyone else has said. Coilovers, roll the fenders, and camber up front to fit the 10s. Depending on how low you decide to go, you will also need to tuck the wiring harness up front and bang out the wheel wells with a hammer. Also a mild stretched tire, 225 or 235 ish, would help on clearance. And if your debating between pbms or megans, get the pbms. There so much nicer overall imo.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode