300zx Engine removal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

3hunna · 01-10-2015, 01:27 AM

Having some problems removing my 1990 300zx TT engine. I have done all the basics and am planing on bringing the transmission out with the motor. When I jack up the motor it is getting stuck on the back middle/driver side fire wall. I have tried pushing the motor and transmission while jacking it up. Any suggestions?

Frank_Jaeger · 01-12-2015, 03:38 PM

Using a load leveler to tilt the engine and transmission should help. Alternatively jacking up the rear might help if your engine's wanting to stay horizontal.

Here's what I'm referring to http://www.bracketracer.com/engine/i...nwithnew01.jpg

japslapsilvia · 01-15-2015, 02:36 PM

Take it out from the bottom

01-10-2015, 01:27 AM	#1
3hunna Join Date: Jan 2015 Location: Iowa Age: 27 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	300zx Engine removal Having some problems removing my 1990 300zx TT engine. I have done all the basics and am planing on bringing the transmission out with the motor. When I jack up the motor it is getting stuck on the back middle/driver side fire wall. I have tried pushing the motor and transmission while jacking it up. Any suggestions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-12-2015, 03:38 PM	#2
Frank_Jaeger Zilvia FREAK! Join Date: Jan 2012 Location: Port Charlotte, Florida Age: 29 Posts: 1,352 Trader Rating: (1) Feedback Score: 1 reviews	Using a load leveler to tilt the engine and transmission should help. Alternatively jacking up the rear might help if your engine's wanting to stay horizontal. Here's what I'm referring to http://www.bracketracer.com/engine/i...nwithnew01.jpg