SEMA and California Agencies Solve Titling Dilemma for Hobbyist Vehicles - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

**RJF** · 11-03-2009, 08:33 AM

FOR IMMEDIATE RELEASE
(November 2, 2009)

Contact: Della Domingo
909-396-0289, ext. 130
[email protected]

SEMA and California Agencies Solve Titling Dilemma for Hobbyist Vehicles

Diamond Bar, CA (November 2, 2009) -- SEMA, the Specialty Equipment Market Association, working on behalf of California enthusiasts of specialty vehicles (street rods, custom vehicles, kit cars and replicas) and in cooperation with the Department of Motor Vehicles, Bureau of Automotive Repair, Air Resources Board and Attorney General’s office has resolved a complex and threatening issue to this market segment and the industry it serves. “This breakthrough procedure allows owners of certain specially constructed vehicles (SCVs) to avoid the pitfalls of a previously muddy process for legally registering and titling such vehicles in California,” said Steve McDonald, SEMA Vice President of Government Affairs. “Under this process, vehicle owners can avoid a situation that could have led to confiscated SCVs and law enforcement action. Further, the program now permits these vehicles to demonstrate state emissions-compliance requirements.”

Over the years, California’s complex vehicle registration laws have created confusion for hobbyists and the state employees who administer the regulations. Consequently, certain SCVs may be erroneously registered or titled. SEMA has worked with state agencies to address the interests of all parties, including enthusiasts in the SCV market, so that these vehicles can be properly registered and titled in the state.

“Given the looming threat of prosecution that owners of specially constructed vehicles were facing, SEMA’s charge was to find an equitable solution that provided these owners a reasonable period of time to voluntarily re-title their vehicles and pay any necessary back taxes and fees,” said SEMA General Counsel Russ Deane. “After five years of work on these issues, an innovative and ground-breaking solution has been created.”

Last year, SEMA helped enact into law a program whereby the Department of Motor Vehicles (DMV) would develop and administer a vehicle registration amnesty program. The amnesty program will be in effect from January 1, 2010 to December 31, 2010 and will apply to vehicles that were previously registered or classified under erroneous or illegal circumstances. Under this new law, the DMV will grant amnesty from prosecution to a vehicle owner if certain conditions are met, including the owner filing a completed application with the department.

More recently, a process was established to allow specially constructed vehicle owners that have been granted amnesty to avail themselves of emissions requirements that recognize the unique nature of these vehicles. While there are still details to be concluded, SEMA has reached a tentative agreement with the state to provide for three methods to achieve compliance.

First, an owner can pay all back taxes and penalties and apply for one of 500 (per year) smog-check exemptions. Under California law, these 500 exemptions for specially constructed vehicles are available each year on a first come, first served basis. For vehicles with an exemption, a smog test referee compares the vehicle to production cars of the era that the specially constructed vehicle most closely resembles to determine the model year. The vehicle owner can then choose whether the inspector will certify the vehicle model year by body type or by the engine model year. Only those emissions controls applicable to the chosen model year are required. California law authorizes a $160 fee for each referee inspection.

Under a second option, SCV owners can pay all back taxes and penalties and then choose to install one of several approved OEM engines and related powertrain components (GM has secured approval for certain engines thus far). Using these OEM components and specifications for the construction of an approved fuel tank and delivery system, these engines provide performance-level power and are intended to meet California emissions compliance requirements. “The GM engine package represents another option for SCV owners seeking to legally register and title their vehicles,” commented SEMA Technical Consultant, Jim McFarland. “In fact, by using one of these engines, it’s also possible for owners of amnesty vehicles to exchange their existing engines for a powertrain that represents the latest in GM’s emissions and performance-related technologies. However, McFarland indicated that because certain variables are involved when configuring any engine or powertrain package for emissions purposes, some measure of compliance risk is involved when such components are installed in a range of vehicle types and conditions.

Finally, working under the banner of the “GreenRod Project” and recognizing that the demand for the 500 exemptions greatly exceeds the supply, SEMA configured a kit of emissions-related aftermarket parts that met California smog-check standards during a series of tests on a project vehicle. An owner can pay all back taxes and penalties and, if the owner is not able to obtain one of the 500 available exemptions, a “retrofit kit” of parts can be installed. Major components in the kit include an aftermarket electronic fuel injection (EFI) system, EFI controller, exhaust headers, camshaft, mufflers and catalytic converters. For the purposes of the GreenRod Project, the retrofit kit was installed on a high-mileage 1980 El Camino fitted with a 1986 carbureted, 5.7 liter engine. The 5.7 liter/350 cubic inch displacement small-block Chevrolet V8 engine is one of the most widely-used engine platforms for all types of specially constructed vehicles.

According to McFarland, “While the engine SEMA used to develop the kit was considered a worst case configuration, it still passed smog-check requirements. Variables such as engine condition, accumulated mileage, and related factors affecting emissions from these parts may, in some cases, cause similar engines not to meet acceptable emissions levels. Nonetheless, transitioning from a carbureted environment to a fuel injected environment while utilizing the latest controller technology and emissions parts upgrades available from the specialty equipment industry resulted in dramatic and unprecedented reductions in tailpipe and evaporative emissions on the test vehicle. The retrofit kit actually improved performance and drivability while not limiting power in a full acceleration mode, compared to a carbureted engine. It was perhaps the first time a package of specialty aftermarket parts has been assembled for the purpose of reducing tailpipe emissions which did not reduce power or performance.”

“Given the seriousness of the title and registration issue in California, SEMA’s work with the state agencies to create practical solutions for specialty vehicle owners, both now and in the future, is an outstanding accomplishment,” said So Cal Speed Shop owner, Pete Chapouris.

SEMA, the Specialty Equipment Market Association founded in 1963, represents the $31.85 billion specialty automotive industry of 7,144 member companies. It is the authoritative source for research, data, trends and market growth information for the specialty auto parts industry. The industry provides appearance, performance, comfort, convenience and technology products for passenger and recreational vehicles. For more information, contact SEMA at 1575 S. Valley Vista Dr., Diamond Bar, CA 91765, tel. 909/396-0289, or visit Specialty Equipment Market Association and EnjoyTheDrive - a SEMA Community.
*************

How do I know if I need to apply for amnesty?
If you have knowingly made any false statement or knowingly concealed any material fact in any document filed with the Department of Motor Vehicles or the California Highway Patrol, you will need to apply for amnesty. Examples of this would be failing to report the actual value of the vehicle and failure to pay the correct sales tax when the vehicle was first titled/registered in California, or incorrectly stating the actual age of the vehicle. As a further example, a replica of a 1932 Ford built in 2002 is not a 1932 vehicle for the purposes of this California amnesty program. It is a 2002 vehicle. In general, if you have reason to believe that there is erroneous information on your vehicle’s title, it should be corrected.

What are the consequences if I do not re-title my vehicle prior to the conclusion of the amnesty period?
If you understated the value of the vehicle to the extent that the State of California lost more than $1,000 in revenue, you could be charged with a felony. If the amount is less or you incorrectly stated the age of the vehicle, you could be charged with a variety of misdemeanors. Recent prosecutions for this type of offense required owners to pay back-taxes and fees averaging $4,000 per vehicle. In some cases, owners were forced to surrender the title to their car. To receive amnesty, any and all back-taxes must be paid in full and the vehicle’s title must be factually corrected.

What documentation should I take to the DMV office when applying for amnesty?
Applying for amnesty will re-start the titling and registration process for your specially constructed vehicle. You will need to submit a new DMV 343 Application for Title and Registration form. You will also be required to file a DMV 5063 Statement of Construction form, listing the origin of the vehicle’s parts and their purchase price. It would be helpful to have a bill of sale for the vehicle or any appropriate receipts for parts/labor that can be used to establish the actual value of the vehicle. If it is likely that your car had a fraudulent title and will need to pass a smog check, it is advisable to apply for one of the 500 smog check exemptions granted per year by the DMV.

How much should I expect to pay for the “retrofit” kit? How much should I expect to pay for the GM engine and powertrain?
The retrofit kit is a collection of emissions-related parts with specifications developed by SEMA for which a variety of aftermarket manufacturers will be able to supply components. On average, the kit should cost approximately $6,000. The labor to install the package will likely cost an additional $5,000. If you choose to use a new engine and powertrain package from GM, the current LS3 package will retail at an estimated $7,900. GM will also offer a number of other emissions-approved engine packages with a variety of performance options and price levels. Estimated installation cost for the GM system is approximately $6,000.

If I use a GM engine, how will I know if I’ve used the correct parts and properly installed them?
GM will include comprehensive instructions that leave little room for error. If you feel that you do not have the mechanical experience to install the package, there are local hot rod shops, independent repair facilities and dealerships capable of installing the parts. Even when parts are correctly installed, there are variables involved when attempting to meet certain compliance requirements, such as engine condition, other modifications and related factors that can affect emissions.

If I choose to retrofit my current engine, how will I know that the parts kit will actually enable my car to pass the smog test?
The retrofit kit that SEMA developed consists of emissions-related parts intended for a range of engine displacements. It was designed to work with engines typically used in specially constructed vehicles. In general, these would be carbureted V8 engines manufactured by GM, Ford and Chrysler. Although these parts enabled SEMA’s project engine to meet emissions requirements, there is no guarantee that they will allow any engine to meet smog check requirements, depending upon variables that include, but limited to the following: mechanical compression ratio limits, improperly installed catalytic converters, excessive wear (valve guides, piston rings and cylinder bores), piston displacement limits and a mal-functioning EGR system.

Is there a way I can get a pre-certification test check to see if my vehicle will pass the smog test?
Yes. California law allows any licensed smog-check station to conduct a pre-test on your vehicle to determine whether it can pass a loaded mode smog test before you submit the car for inspection at a BAR Referee station. The average price for a pre-certification smog test in California is approximately $49. If your vehicle fails the pre-certification smog check, it may be possible to make adjustments that will bring it into compliance. As with any vehicle maintenance, it’s best to use a mechanic you know and trust.

What if I have questions about technical aspects of this program?
SEMA and GM will be available to provide some technical assistance for enthusiasts who apply for amnesty to help them navigate through the process.

About SEMA

SEMA, the Specialty Equipment Market Association founded in 1963, represents the $31.85 billion specialty automotive industry of 7,144 member-companies. It is the authoritative source for research, data, trends and market growth information for the specialty auto parts industry. The industry provides appearance, performance, comfort, convenience and technology products for passenger and recreational vehicles. For more information, contact SEMA at 1575 S. Valley Vista Dr., Diamond Bar, CA 91765, tel: 909/396-0289, or visit Specialty Equipment Market Association or EnjoyTheDrive - a SEMA Community.

###

Om1kron · 11-03-2009, 10:38 AM

fucking bad ass.

let5l1de · 11-03-2009, 12:39 PM

Finally SCVs are fucking recognized...

Funny they mention "GreenRod" as the project name. Thats my graphic design co. name that I have intentions of merging with a performance automotive shop venture...

~m
GreenRod

drift freaq · 11-03-2009, 04:27 PM

wow this pretty much opens the door wide for making legalization of LS1 swaps easy.

ceiling240 · 11-03-2009, 05:34 PM

That's cool. SEMA kicks ass. This sounds like really good new for those in California!

simplistek · 11-03-2009, 05:42 PM

too bad this doesn't help the SR's and RB's.

***S14DB*** · 11-03-2009, 06:00 PM

There goes the classic car exemptions....

drift freaq · 11-03-2009, 07:17 PM

Quote:

Originally Posted by S14DB

There goes the classic car exemptions....

Not really S14DB, as it reads this applying to Specialty constructed Vehicles. I.E. kit cars, replica cars, engine swap cars. In effect it streamlines the process of buying a LSxx crate engine and parts to drop it in your car With CARB stickers ready to go. Which means we can take the swap straight to the smog tech and have him smog it. No going to the Referee to get it approved.

Classic car exemptions still stand. Anything older than 1975 is smog exempt. They stopped the rolling 25 year rule a few years back and froze it at 1975. As far as importation goes there is a 25 year rolling law.

***S14DB*** · 11-03-2009, 07:42 PM

Quote:

Originally Posted by drift freaq

Not really S14DB, as it reads this applying to Specialty constructed Vehicles. I.E. kit cars, replica cars, engine swap cars. In effect it streamlines the process of buying a LSxx crate engine and parts to drop it in your car With CARB stickers ready to go. Which means we can take the swap straight to the smog tech and have him smog it. No going to the Referee to get it approved.

Classic car exemptions still stand. Anything older than 1975 is smog exempt. They stopped the rolling 25 year rule a few years back and froze it at 1975. As far as importation goes there is a 25 year rolling law.

I was not referring to this law. I'm just saying it sets up a slippery slope.

"Now that that street rod can pass smog why can't that cuda?"

drift freaq · 11-04-2009, 12:58 AM

Quote:

Originally Posted by S14DB

I was not referring to this law. I'm just saying it sets up a slippery slope.

"Now that that street rod can pass smog why can't that cuda?"

A Cuda is smog exempt. All the Classic Cuda's are smog exempt. Chrysler corp stopped making them by 75.

let5l1de · 11-04-2009, 01:44 AM

Quote:

Originally Posted by drift freaq

A Cuda is smog exempt. All the Classic Cuda's are smog exempt. Chrysler corp stopped making them by 75.

Okay, back to zilvia you mopar (mopower) mavens. Who knows, next we will be talking about 318's, 360's 426w's, 440's and so on...

~m

simplistek · 11-04-2009, 03:06 AM

Quote:

Originally Posted by drift freaq

Not really S14DB, as it reads this applying to Specialty constructed Vehicles. I.E. kit cars, replica cars, engine swap cars. In effect it streamlines the process of buying a LSxx crate engine and parts to drop it in your car With CARB stickers ready to go. Which means we can take the swap straight to the smog tech and have him smog it. No going to the Referee to get it approved.

Classic car exemptions still stand. Anything older than 1975 is smog exempt. They stopped the rolling 25 year rule a few years back and froze it at 1975. As far as importation goes there is a 25 year rolling law.

so if there is a 25 year rolling law on importation, then by 2014, we can start importing 89 S13s from other countries?

punxva · 11-04-2009, 09:36 AM

Quote:

Originally Posted by simplistek

so if there is a 25 year rolling law on importation, then by 2014, we can start importing 89 S13s from other countries?

and why would you waste your time doing that? most 240s are already beat now, why wait until they are 25 years old to just have an expensive piece of shit rust bucket, we all know 240s are soft like butter and the metal is thin. It'd be a complete waste of time

drift freaq · 11-04-2009, 11:15 AM

Quote:

Originally Posted by punxva

and why would you waste your time doing that? most 240s are already beat now, why wait until they are 25 years old to just have an expensive piece of shit rust bucket, we all know 240s are soft like butter and the metal is thin. It'd be a complete waste of time

I would tend to agree, waiting till 2014 to buy a JDM S13 or S14 is rather ludicrous. Especially when clean examples of the cars can still be bought now for very reasonable prices. Oh it does not have RHD and its not a SR boo hoo. RHD is dangerous to drive on LHD roads to begin with. You really want a SR that bad install one. Shit why not just install a LS1 CARB kit crate engine in your car and call it a day. Smog legal, and a blast to boot.

irax · 11-04-2009, 10:46 PM

awesome... but let me know when this shit happens!

karl wasabi · 11-05-2009, 12:20 AM

haha. Cliffnotes?

irax · 11-06-2009, 12:37 AM

SEMA + GM = CARB approved V8 kits for motor swaps

fuck.... my ...... life.....

the new thing, v8, four door, vip, drift

everything i ever wanted

ronmcdon · 11-16-2009, 01:27 AM

Bah, it's only 500 exemptions per year!!

Otherwise this is a great deal if that LS-1 swap is what you plan.
Good deal for GM too probably.

best scenario would be to get tax deductions for LS-1 swaps.
it would be good for the economy.

11-03-2009, 08:33 AM	#1
RJF Super Administrator & Bean Counter Join Date: Jun 2001 Location: Lone Tree, CO Posts: 2,400 Trader Rating: (0) Feedback Score: 0 reviews	SEMA and California Agencies Solve Titling Dilemma for Hobbyist Vehicles FOR IMMEDIATE RELEASE (November 2, 2009) Contact: Della Domingo 909-396-0289, ext. 130 [email protected] SEMA and California Agencies Solve Titling Dilemma for Hobbyist Vehicles Diamond Bar, CA (November 2, 2009) -- SEMA, the Specialty Equipment Market Association, working on behalf of California enthusiasts of specialty vehicles (street rods, custom vehicles, kit cars and replicas) and in cooperation with the Department of Motor Vehicles, Bureau of Automotive Repair, Air Resources Board and Attorney General’s office has resolved a complex and threatening issue to this market segment and the industry it serves. “This breakthrough procedure allows owners of certain specially constructed vehicles (SCVs) to avoid the pitfalls of a previously muddy process for legally registering and titling such vehicles in California,” said Steve McDonald, SEMA Vice President of Government Affairs. “Under this process, vehicle owners can avoid a situation that could have led to confiscated SCVs and law enforcement action. Further, the program now permits these vehicles to demonstrate state emissions-compliance requirements.” Over the years, California’s complex vehicle registration laws have created confusion for hobbyists and the state employees who administer the regulations. Consequently, certain SCVs may be erroneously registered or titled. SEMA has worked with state agencies to address the interests of all parties, including enthusiasts in the SCV market, so that these vehicles can be properly registered and titled in the state. “Given the looming threat of prosecution that owners of specially constructed vehicles were facing, SEMA’s charge was to find an equitable solution that provided these owners a reasonable period of time to voluntarily re-title their vehicles and pay any necessary back taxes and fees,” said SEMA General Counsel Russ Deane. “After five years of work on these issues, an innovative and ground-breaking solution has been created.” Last year, SEMA helped enact into law a program whereby the Department of Motor Vehicles (DMV) would develop and administer a vehicle registration amnesty program. The amnesty program will be in effect from January 1, 2010 to December 31, 2010 and will apply to vehicles that were previously registered or classified under erroneous or illegal circumstances. Under this new law, the DMV will grant amnesty from prosecution to a vehicle owner if certain conditions are met, including the owner filing a completed application with the department. More recently, a process was established to allow specially constructed vehicle owners that have been granted amnesty to avail themselves of emissions requirements that recognize the unique nature of these vehicles. While there are still details to be concluded, SEMA has reached a tentative agreement with the state to provide for three methods to achieve compliance. First, an owner can pay all back taxes and penalties and apply for one of 500 (per year) smog-check exemptions. Under California law, these 500 exemptions for specially constructed vehicles are available each year on a first come, first served basis. For vehicles with an exemption, a smog test referee compares the vehicle to production cars of the era that the specially constructed vehicle most closely resembles to determine the model year. The vehicle owner can then choose whether the inspector will certify the vehicle model year by body type or by the engine model year. Only those emissions controls applicable to the chosen model year are required. California law authorizes a $160 fee for each referee inspection. Under a second option, SCV owners can pay all back taxes and penalties and then choose to install one of several approved OEM engines and related powertrain components (GM has secured approval for certain engines thus far). Using these OEM components and specifications for the construction of an approved fuel tank and delivery system, these engines provide performance-level power and are intended to meet California emissions compliance requirements. “The GM engine package represents another option for SCV owners seeking to legally register and title their vehicles,” commented SEMA Technical Consultant, Jim McFarland. “In fact, by using one of these engines, it’s also possible for owners of amnesty vehicles to exchange their existing engines for a powertrain that represents the latest in GM’s emissions and performance-related technologies. However, McFarland indicated that because certain variables are involved when configuring any engine or powertrain package for emissions purposes, some measure of compliance risk is involved when such components are installed in a range of vehicle types and conditions. Finally, working under the banner of the “GreenRod Project” and recognizing that the demand for the 500 exemptions greatly exceeds the supply, SEMA configured a kit of emissions-related aftermarket parts that met California smog-check standards during a series of tests on a project vehicle. An owner can pay all back taxes and penalties and, if the owner is not able to obtain one of the 500 available exemptions, a “retrofit kit” of parts can be installed. Major components in the kit include an aftermarket electronic fuel injection (EFI) system, EFI controller, exhaust headers, camshaft, mufflers and catalytic converters. For the purposes of the GreenRod Project, the retrofit kit was installed on a high-mileage 1980 El Camino fitted with a 1986 carbureted, 5.7 liter engine. The 5.7 liter/350 cubic inch displacement small-block Chevrolet V8 engine is one of the most widely-used engine platforms for all types of specially constructed vehicles. According to McFarland, “While the engine SEMA used to develop the kit was considered a worst case configuration, it still passed smog-check requirements. Variables such as engine condition, accumulated mileage, and related factors affecting emissions from these parts may, in some cases, cause similar engines not to meet acceptable emissions levels. Nonetheless, transitioning from a carbureted environment to a fuel injected environment while utilizing the latest controller technology and emissions parts upgrades available from the specialty equipment industry resulted in dramatic and unprecedented reductions in tailpipe and evaporative emissions on the test vehicle. The retrofit kit actually improved performance and drivability while not limiting power in a full acceleration mode, compared to a carbureted engine. It was perhaps the first time a package of specialty aftermarket parts has been assembled for the purpose of reducing tailpipe emissions which did not reduce power or performance.” “Given the seriousness of the title and registration issue in California, SEMA’s work with the state agencies to create practical solutions for specialty vehicle owners, both now and in the future, is an outstanding accomplishment,” said So Cal Speed Shop owner, Pete Chapouris. SEMA, the Specialty Equipment Market Association founded in 1963, represents the $31.85 billion specialty automotive industry of 7,144 member companies. It is the authoritative source for research, data, trends and market growth information for the specialty auto parts industry. The industry provides appearance, performance, comfort, convenience and technology products for passenger and recreational vehicles. For more information, contact SEMA at 1575 S. Valley Vista Dr., Diamond Bar, CA 91765, tel. 909/396-0289, or visit Specialty Equipment Market Association and EnjoyTheDrive - a SEMA Community. *********** How do I know if I need to apply for amnesty? If you have knowingly made any false statement or knowingly concealed any material fact in any document filed with the Department of Motor Vehicles or the California Highway Patrol, you will need to apply for amnesty. Examples of this would be failing to report the actual value of the vehicle and failure to pay the correct sales tax when the vehicle was first titled/registered in California, or incorrectly stating the actual age of the vehicle. As a further example, a replica of a 1932 Ford built in 2002 is not a 1932 vehicle for the purposes of this California amnesty program. It is a 2002 vehicle. In general, if you have reason to believe that there is erroneous information on your vehicle’s title, it should be corrected. What are the consequences if I do not re-title my vehicle prior to the conclusion of the amnesty period? If you understated the value of the vehicle to the extent that the State of California lost more than $1,000 in revenue, you could be charged with a felony. If the amount is less or you incorrectly stated the age of the vehicle, you could be charged with a variety of misdemeanors. Recent prosecutions for this type of offense required owners to pay back-taxes and fees averaging $4,000 per vehicle. In some cases, owners were forced to surrender the title to their car. To receive amnesty, any and all back-taxes must be paid in full and the vehicle’s title must be factually corrected. What documentation should I take to the DMV office when applying for amnesty? Applying for amnesty will re-start the titling and registration process for your specially constructed vehicle. You will need to submit a new DMV 343 Application for Title and Registration form. You will also be required to file a DMV 5063 Statement of Construction form, listing the origin of the vehicle’s parts and their purchase price. It would be helpful to have a bill of sale for the vehicle or any appropriate receipts for parts/labor that can be used to establish the actual value of the vehicle. If it is likely that your car had a fraudulent title and will need to pass a smog check, it is advisable to apply for one of the 500 smog check exemptions granted per year by the DMV. How much should I expect to pay for the “retrofit” kit? How much should I expect to pay for the GM engine and powertrain? The retrofit kit is a collection of emissions-related parts with specifications developed by SEMA for which a variety of aftermarket manufacturers will be able to supply components. On average, the kit should cost approximately $6,000. The labor to install the package will likely cost an additional $5,000. If you choose to use a new engine and powertrain package from GM, the current LS3 package will retail at an estimated $7,900. GM will also offer a number of other emissions-approved engine packages with a variety of performance options and price levels. Estimated installation cost for the GM system is approximately $6,000. If I use a GM engine, how will I know if I’ve used the correct parts and properly installed them? GM will include comprehensive instructions that leave little room for error. If you feel that you do not have the mechanical experience to install the package, there are local hot rod shops, independent repair facilities and dealerships capable of installing the parts. Even when parts are correctly installed, there are variables involved when attempting to meet certain compliance requirements, such as engine condition, other modifications and related factors that can affect emissions. If I choose to retrofit my current engine, how will I know that the parts kit will actually enable my car to pass the smog test? The retrofit kit that SEMA developed consists of emissions-related parts intended for a range of engine displacements. It was designed to work with engines typically used in specially constructed vehicles. In general, these would be carbureted V8 engines manufactured by GM, Ford and Chrysler. Although these parts enabled SEMA’s project engine to meet emissions requirements, there is no guarantee that they will allow any engine to meet smog check requirements, depending upon variables that include, but limited to the following: mechanical compression ratio limits, improperly installed catalytic converters, excessive wear (valve guides, piston rings and cylinder bores), piston displacement limits and a mal-functioning EGR system. Is there a way I can get a pre-certification test check to see if my vehicle will pass the smog test? Yes. California law allows any licensed smog-check station to conduct a pre-test on your vehicle to determine whether it can pass a loaded mode smog test before you submit the car for inspection at a BAR Referee station. The average price for a pre-certification smog test in California is approximately $49. If your vehicle fails the pre-certification smog check, it may be possible to make adjustments that will bring it into compliance. As with any vehicle maintenance, it’s best to use a mechanic you know and trust. What if I have questions about technical aspects of this program? SEMA and GM will be available to provide some technical assistance for enthusiasts who apply for amnesty to help them navigate through the process. About SEMA SEMA, the Specialty Equipment Market Association founded in 1963, represents the $31.85 billion specialty automotive industry of 7,144 member-companies. It is the authoritative source for research, data, trends and market growth information for the specialty auto parts industry. The industry provides appearance, performance, comfort, convenience and technology products for passenger and recreational vehicles. For more information, contact SEMA at 1575 S. Valley Vista Dr., Diamond Bar, CA 91765, tel: 909/396-0289, or visit Specialty Equipment Market Association or EnjoyTheDrive - a SEMA Community. ### __________________ Zilvia.net...Where the Truth Hurts and Pain Builds Character**

11-03-2009, 10:38 AM	#2
Om1kron Post Whore! Join Date: Sep 2004 Location: Simi Valley, CA Age: 40 Posts: 6,879 Trader Rating: (15) Feedback Score: 15 reviews	fucking bad ass. __________________ Wayne

11-03-2009, 12:39 PM	#3
let5l1de Zilvia FREAK! Join Date: Dec 2007 Location: 626DRIFT, ca Posts: 1,420 Trader Rating: (30) Rides Gallery: let5l1de Feedback Score: 30 reviews	Finally SCVs are fucking recognized... Funny they mention "GreenRod" as the project name. Thats my graphic design co. name that I have intentions of merging with a performance automotive shop venture... ~m GreenRod __________________ GR Performance facebook Pics & More! Comments! http://www.facebook.com/pages/GR-Performance/120477531339202 Read My Sales Review 626 Friday Nights San Gabriel

11-03-2009, 04:27 PM	#4
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	wow this pretty much opens the door wide for making legalization of LS1 swaps easy. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

11-03-2009, 05:34 PM	#5
ceiling240 Join Date: Oct 2006 Location: Hanover, ON Age: 33 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	That's cool. SEMA kicks ass. This sounds like really good new for those in California! __________________

11-03-2009, 05:42 PM	#6
simplistek Zilvia Junkie Join Date: Mar 2007 Location: San Diego Posts: 463 Trader Rating: (7) Feedback Score: 7 reviews	too bad this doesn't help the SR's and RB's. __________________ v e r t e x - u s a . c o m

11-03-2009, 06:00 PM	#7
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	There goes the classic car exemptions.... __________________ Comments should be taken as Opinions not as Statements of Fact

11-04-2009, 10:46 PM	#15
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 37 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	awesome... but let me know when this shit happens! __________________ Drives a BRZ and is building a V6 S12 coupe.

11-05-2009, 12:20 AM	#16
karl wasabi Post Whore! Join Date: Dec 2006 Location: Walnut/SoCal Posts: 3,898 Trader Rating: (41) Feedback Score: 41 reviews	haha. Cliffnotes? __________________ Karl Wasabi Private Seller - Review Thread

11-06-2009, 12:37 AM	#17
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 37 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	SEMA + GM = CARB approved V8 kits for motor swaps fuck.... my ...... life..... the new thing, v8, four door, vip, drift everything i ever wanted __________________ Drives a BRZ and is building a V6 S12 coupe.

11-16-2009, 01:27 AM	#18
ronmcdon Post Whore! Join Date: Sep 2005 Location: beverly hills Age: 86 Posts: 4,254 Trader Rating: (6) Feedback Score: 6 reviews	Bah, it's only 500 exemptions per year!! Otherwise this is a great deal if that LS-1 swap is what you plan. Good deal for GM too probably. best scenario would be to get tax deductions for LS-1 swaps. it would be good for the economy.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode