Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 11-01-2020, 03:25 PM   #1
DiscountPirate
Zilvia Member
 
Join Date: Jul 2016
Location: SoCal
Posts: 189
Trader Rating: (0)
DiscountPirate is an unknown quantity at this point
Feedback Score: 0 reviews
Wire color pin out for S13 Silvia sr20det Lower Harness, E201 connector ?

So i finished my Silvia a couple weeks back. It is a 1990 Silvia that was originally SR20DE Auto and now it is SR20DET Manual, and I used wiring specialties lower harness and everything is complete and stock. Runs and drives great, just have one more 8 pin lower harness connector to mate to 4 pin connector by fuse box then done. I've searched and found all kinds of pin outs but still can't 100% confirm what all the wire colors pin out for. I still have consult port plug and complete AC and no ABS so even if not all wires are needed for car to run I might need them for accessories to function. So the stock s13 sr20det lower harness has the 8 pin I believe it is connector E201, and 4 of the wires match to the 4 pin connector I have by fusebox. Then there are 3 extra wires from E201 connector that I need to figure out what they are for. These are the wire colors, and I put what they might be for, please confirm if you know, thanks.

-Green/Blue
-Green/White - ABS ECU consult connector?
-Green/Brown
-White/Red - AT Control Unit?
-Yellow/White
-Yellow/Blue - Oil Pressure Switch?
-Yellow/Black - AC Defroster?
DiscountPirate is offline   Reply With Quote
Sponsored Links
Old 11-03-2020, 01:19 PM   #2
DiscountPirate
Zilvia Member
 
Join Date: Jul 2016
Location: SoCal
Posts: 189
Trader Rating: (0)
DiscountPirate is an unknown quantity at this point
Feedback Score: 0 reviews
I think I figured it out, I still don't know exactly what the wire colors correspond to but it's at least connected. I use four of the wires to connect to the 4 pin connector by the fuse box, and the other 3 green wires got taped up because they were redundant because the WR lower harness has the subharness for auto > manual conversion so those wires are there.

Last edited by DiscountPirate; 11-05-2020 at 12:38 PM..
DiscountPirate is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™