jacobzking

I just wanted to post a positive review for jdmenginescorp.com in richardson, TX. Someone had posted a bad experience with them a few years back so I thought I'd put in my 2 cents...

The owner, David, is a pretty nice guy and firm on his prices.

I bought an SR from him for $1799 (which happened to include an expensive manifold, t28, gismo 555s, reprogrammed ecu, z32 maf, metah head gasket, etc...

The motor was in EXCELLENT shape and has great compression. Started right up after install and runs great so far.

I did notice on his eBay listings that he shows videos of compression tests for SOME motors, but not all. I'm assuming he tests them all and only posts the ones with good or high/even compression.

Also, the MAF connector on the harness was for a z32 maf, and the ECU had Z32 written on it... but the car came with an SR MAF. When I got the engine home and unloaded and started checking things out, I realized that the MAF wouldn't plug in. I figured, no big deal, z32 MAFS are cheap. But before going out and buying one, I called David at JDM and he said, "no big deal, bring your SR MAF in and I'll swap it for a z32 one."

Good service. Great engine. Good price (EXCELLENT price if you take in to fact the motor has more in upgrades than what I paid for the whole motor itself).

Thanks JDM!

PS: I just wanted to note that David was very up front about the warranty. Startup warranty for motor only. That's it. And I can understand why; he buys these in "bulk" and sells them for a minimal markup.

NHTKID

well im going there in hopes to buy a motor tomorrow morning. ive heard that dallas jdm motors are a better business and seem to have better service then jdmenginecorp, however dallas jdm motors seem to not have any more s13 sr's in stock. ill let you know how my experience goes, and i sure hope the motor i get doesnt end up knocking or something

(if this post is against rules i do apologize just delete it.)

CrazyIvan

I myself bought one Aristo 2jzgte with JDM Engines Corp and the turbos were blown, several sensors were broken, and 2 piston rings were bad (but not yet blown). In the end I ended up going single turbo b/c of the blown stock turbos...

__________________
powder-coated.com - I do Custom Powder Coating

jacobzking

look at his auctions on ebay first. find motors that have been compression tested and show the results. i'm sure he tests ALL of the motors that come in. if they have good numbers, he will posts them. if not, he won't mention compression tests for that motor.

thats why the motors with no compression test results are cheaper.

i got a BAD ASS motor from that guy, but I also didn't buy the cheapest thing he had there.

nyc240sx

jhot imports was a good place dont know what happened with them i think they were in denton, tx..they had a ebay store no longer see it

shoryuuu

most of those guys from Jhot opened up dallas jdm motors, they said the jhot warehouse was too big and the new warehouse is like 1/3 of the size with just as many parts.

jacobzking

how did it go?

NHTKID

Sorry it took so long to get back around to this I do apologize. I've been busy with music. Anyway, I went up and picked out a j4 blacktop cold compression was done right in front of me and came back 150 across all 4, so that was very pleasing to me. The owner was very nice and very helpful, overall the customer service was great. Like OP stated they are stern on their startup policy. So when I got it home I started on putting it in because their warranty is void if you tamper with the motor. Me and a buddy put it in and wired everything up with a wiring specialties harness, plugged the vaccum lines and bypassed the Maf to the throttle body and the motor fired right up, no taps, no knocks, no weird noises!! Sounded as healthy as it could be! Overall great experience. Once the motor started I've been taking my time, ordering quality parts, replacing things that I personally feel should be replaced when performing a swap. Tucking harness ect.

jacobzking

REPLACE THE THERMOSTAT!!! LOL. I was so effing pleased with that motor that I bought, and spent the last 2 months getting the car track ready (new brakes, suspension, seats... but the one thing i din't do was one of the cheapest and easiest... the t-stat. and my engine was overheating really bad on track day this past week. luckily, i think the motor is ok. anyway, good to hear you had another good experience with those guys!

FRpilot

didn't jhot have 2 warehouses? 1 in tx and another in georgia? i bought 2 clips from them, shipping was insane, but they were clips coming from half way across the country so it was to be expected.

__________________

1sickS14

This is good to know. I'm in the market for a RB and laying out my options.

Wezz

Just ordered an S14 SR20DET from David at JDM. Hopefully i have a good experience as you guys. I will post my experience after i receive the motor set..

Paul

JDM Engine Corp

We like happy customers.

__________________
~Rose
JDM Engine Corp 1315 Exchange Dr Richardson Tx 75081

jacobzking

welcome to the forum. thanks again for my great motor. even after i overheated it HARD on the track and oil starved it... it still runs like a new motor.

nyc240sx

thats what it seemed like i knew this place was the same one i bought a rb25 from jhot a while back it was super clean with everything taped up on the motor..

Hoffman5982

On Feb 7 I ordered an Automatic S14 SR swap from them. What I saw in the pictures of the listing was literally exactly what I got. The motor set was super clean. I got it in on a Thursday, spent that night scrubbing the little bit of road grime that was on it, and putting my manual tranny and what not on, and had it in the car that Friday night and fired it up. I've put about 7k miles on it and it's still running perfectly.

I could not be happier with my choice. JDM Engine Corp, since you're here, I highly recommend you start getting more auto engine sets in if you can. I recommend everyone looking to go swap to take that route as the motors are generally cleaner. Thanks again for all the help.

__________________

cjunyc

Are these guys the same as Dallasjdmmotors in Arlington Texas? because i just received a motor I bought from Dallasjdmmotors from ebay and its motor is pretty banged up and the ecu is missing. I contacted them the guy one the phone was pretty nice I hope my issues get resolved =/

cjunyc

From all the good reviews I hope they are the same guys =/ or else im going to have some major issues from the looks of the motor.

jacobzking

NOT the same people

cjunyc

Then wish me luck guys..... lol smh

Tim_Zenki

has anyone recently purchased from this company? I want to buy a s14sr from them but theres no compression numbers listed and i saw someone post about that..

NHTKID

Just give them a call, being from georgia im sure they would take a video for you of a compression test. Its not standard practice before buying a motor, but it damn well should be and these guys should take care of you no problem. I picked mine up in person but they have some on ebay with compression videos, and the one you order is the one you get. awesome dudes

bmitchell_ga

Anyone with any more recent experience? I'm looking to by a motor this week.

adams 02rs

yeah i buy engines from importers online if they are reputable. in some case's you are just better off finding a dis/ importer near your location, therefore you can see the engine in person and pyhsically inspect it and if there is anything wrong with it you can bring it straight to them instead of shipping it back and spending more money. just my ! sir.

souljaseth33

Not sure where you are in Souther GA, but if your anywhere near Jax, FL I came up with these guys after a quick search. http://www.jdmshopusa.com/index.php?action=contactMaybe give them a call and stop by to check out what they've got in stock.

__________________

s0fa king

may as well just go off eBay feedback.

Flyin_bryan

I purchased an s14 sr20det it spun a rod with 50 miles, it was a piece of shit, 14 day warranty my ass. he is a ripoff artist, I even drove there to get it brought it home and has been a nightmare.. Warning do not buy from david he will be nice until he has your money!!!!!! STAY AWAY FROM THERE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

rgnhd

does anyone have any more input? i already waisted 3k on a rb20. im trying not to waist more. i am physically going down there and having them do a compression test in my face. i tried calling texas jdm motors but they're number that is on their front page goes to another company in nj. Is there any place in the dallas area you would recommend? I'm in OKC. I just want one that wont blow a cylinder ring in two weeks..

s13 drifta

I purchased a sr20 engine swap from JDM Engine Corp in Texas. I had it shipped and it was in great condition. I would go with them again.

__________________
PM me for s13 or s14 parts!

vJilly

anymore input on these guys? thinking of ordering a CA swap from them for my.. well I won't spoil it but anyway. any more good reviews from these guys? EDIT: what's this on their site about the crank sensor, EGR (even though i don't care about EGR since alabama doesn't have emissions) and the CAS not coming with the motor and that id have to swap them out from my existing motor. I mean I know I'm a noob but that just doesn't sound right to me.

__________________