Needing help with a small oem part... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DRFTSAINT · 08-21-2008, 09:18 PM

Motor: SR20DET redtop w/S15 spec-R T28
OEM wastegate actuator
I am trying to find a new replacement for the small piece that holds the wastegate actuator arm to the wastegate flange. Its like a little clip that clicks into the little recess on the pin, and I am looking for the proper name or part number. I don't know how well that explains it, I will try to take a pic of the spot it attaches to tomorrow for better reference.
Once again its the little locking tab that keps the wastegate actuator rod from popping of the wastegate rocker flange.
I was considering going to a junk yard and taking one off from a TT 300zx T25, but I'd prefer to get a new one, because the exhaust heat can make it brittle and I don't want to go through loosing another one...
Thanks for any help you might be able to provide...

AsleepAltima · 08-21-2008, 10:33 PM

auto zone help aisle. thats where i got a pack of them for mine.

*fliprayzin240sx* · 08-22-2008, 02:16 AM

You already answered your own question...go to the dealer and tell what you're looking for but use a Z32 TT as a reference. Usually, theyll print out a picture break down of all the turbo component, dont see why they wouldnt have it in there. You see it, point at it and order it.

SoguRacing · 08-22-2008, 02:17 AM

i'm pretty sure home depot sells them.

Firestorm · 08-22-2008, 02:27 AM

you can use any kind of snap ring that has the same inner diameter...i'm sure a hardware store could sort you out.

DRFTSAINT · 08-22-2008, 01:32 PM

Thanks for all the help, and I checked Courtesy Nissan first before posting this, and in the factory turbo parts breakdown it did not have a part number for it under the Z32 TT section that is why I posted this.
Again, thank you all for your help and assistance.

08-21-2008, 09:18 PM	#1
DRFTSAINT Join Date: Mar 2006 Location: Broken Arrow, Ok Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Needing help with a small oem part... Motor: SR20DET redtop w/S15 spec-R T28 OEM wastegate actuator I am trying to find a new replacement for the small piece that holds the wastegate actuator arm to the wastegate flange. Its like a little clip that clicks into the little recess on the pin, and I am looking for the proper name or part number. I don't know how well that explains it, I will try to take a pic of the spot it attaches to tomorrow for better reference. Once again its the little locking tab that keps the wastegate actuator rod from popping of the wastegate rocker flange. I was considering going to a junk yard and taking one off from a TT 300zx T25, but I'd prefer to get a new one, because the exhaust heat can make it brittle and I don't want to go through loosing another one... Thanks for any help you might be able to provide...

08-22-2008, 02:16 AM	#3
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	You already answered your own question...go to the dealer and tell what you're looking for but use a Z32 TT as a reference. Usually, theyll print out a picture break down of all the turbo component, dont see why they wouldnt have it in there. You see it, point at it and order it. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

08-22-2008, 02:17 AM	#4
SoguRacing Post Whore! Join Date: Nov 2007 Location: (714) Age: 35 Posts: 2,967 Trader Rating: (23) Rides Gallery: SoguRacing Feedback Score: 23 reviews	i'm pretty sure home depot sells them. __________________ Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2008, 10:33 PM	#2
AsleepAltima Zilvia Addict Join Date: Aug 2006 Location: Ontario, Ca Age: 48 Posts: 667 Trader Rating: (8) Feedback Score: 8 reviews	auto zone help aisle. thats where i got a pack of them for mine.

08-22-2008, 02:27 AM	#5
Firestorm Zilvia Junkie Join Date: Sep 2007 Location: Germany Age: 34 Posts: 371 Trader Rating: (0) Feedback Score: 0 reviews	you can use any kind of snap ring that has the same inner diameter...i'm sure a hardware store could sort you out.

08-22-2008, 01:32 PM	#6
DRFTSAINT Join Date: Mar 2006 Location: Broken Arrow, Ok Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for all the help, and I checked Courtesy Nissan first before posting this, and in the factory turbo parts breakdown it did not have a part number for it under the Z32 TT section that is why I posted this. Again, thank you all for your help and assistance.