Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Wild Steves KA-T Coupe

tuzzio · 03-22-2017, 05:05 PM

Been plugging away at the turd here and there. Went to Travis' house to finish my fabwork. Weld on the wastegate flange, weld 90* elbow on compressor housing,\ modify my downpipe, dump tube, and intercooler piping to work.

The downpipe and dump tube have been since heat wrapped, and i'll be running a turbo blanket as well to combat the heat from the master.

Since I had to make all new oil/coolant lines, I took my intake manifold off to make life easier. Figured i'd clean up my engine harness while I was in there. Remove all the OEM emissions garbage and the OEM coil stuff as well. Came out pretty decent looking.

03-22-2017, 05:05 PM	#27
tuzzio Nissanaholic! Join Date: Oct 2013 Location: Western Mass. Posts: 2,254 Trader Rating: (3)	Been plugging away at the turd here and there. Went to Travis' house to finish my fabwork. Weld on the wastegate flange, weld 90* elbow on compressor housing,\ modify my downpipe, dump tube, and intercooler piping to work. The downpipe and dump tube have been since heat wrapped, and i'll be running a turbo blanket as well to combat the heat from the master. Since I had to make all new oil/coolant lines, I took my intake manifold off to make life easier. Figured i'd clean up my engine harness while I was in there. Remove all the OEM emissions garbage and the OEM coil stuff as well. Came out pretty decent looking.