help me find this fitting and i will paypal you!
 

ok so basically i have a bottom mount gt28 setup ,went ahead and bought the jgs oil return kit.due to the location i have the bung as seen below ,when i use the nice blue silicone hose they give you it kinks(due to me retaining AC).im currently using a high temp heater core hose for a temp. fix but ithink its backing up oil.i made my own fitting with a 90 degree elbow to fit in the bung out of copper,but cant get it to spin even one full turn due to it hitting things.so basically im looking for a fitting (90 degree type)that i can thread in this bung that wont spin untill it starts to get tight.just like the oil feed works.if some one can find me the fitting i will paypal you 5 bucks .thanks btw not sure of the thread pitch i beleive its half an inch though.
http://i571.photobucket.com/albums/s...0531-00408.jpg

Shop for Brass Fittings and Valves Online

If they dont have it odds are it doesnt exist in brass NPT fittings.

think i found it on anplumbing.com i just dont know the thread pitch and what not for the jgs bung?

It is most likely a 1/2" NPT male that you need. I'm like 90% sure.

yeah i think i found it on anplumbing.com it seems the only size they have to offer is -8 hose for what fitting i need.is that good ?i see people using -10 all the time?

Just use This
Summit Racing SUM-240118B - Summit Racing® Hose Ends - Summit Racing Equipment
And use some -10 an line with it silicone hose sucks I got sick of replacing hose from cuts and shit

hey man thanks i already fig out what im doing thanks i came across anplumbing.com and put together somthing ...im going with 10 an ,i was looking at this AN Perform-O-Flex Hose | ANplumbing.com hows it look and 1 foot should be enough right?

Where is muh money

*looks at reply, googles
*comes back 5 mins later*
"yeah i already found it, yeah i already found it, yeah i figured it out already NO MONEY FOR YOU"

Looks like the op owes zar some CASH!!!