Showing Visitor Messages 1 to 1 of 1
-
for the rears i'm using h&r supersports, cut one coil off, maximum motorsports adjustable lower control arms, and tokico hp shocks. in the front, maximum motorsports front coilover kit for tokico (fox body), maximum motorsports 4bolt c/c plates (required for the coilover conversion), steeda X2 lower balljoints (without the spring spacers for an additional 1/2" lowering when i didn't run the coilovers), and the steeda bumpsteer kit. just crank all the adjustments to their lowest positions to get the stance i had in the pics. that height in the pics was only for taking those pics. also, the rear quarter panels have been hammered. the cats drag on the ground when at that height. as for engine mods, nothing except a PI intake from an 03/04 GT. living in Cali sux.