View Full Version : tanabe coilovers not low enough
turknjd
12-03-2005, 02:04 PM
my tanabe sustecs leave about an inch of wheel gap. i have pro 210 springs and i now that they make other springs that can be set up with the coilover setup. my question is, can i put another set of springs on there (tanabe or other) that will allow me to lower my car a little more?
sdtouge
12-03-2005, 02:31 PM
are you sure you hve coilovers?
i think you just have springs, gf210 or whatever springs
if not then you can adjust the height by the spring perch
Dousan_PG
12-03-2005, 03:59 PM
kts camber plate are good for the front to lower
for rear you need to either unload on the preload or get another set of springs (sounds like you have springs)
both are coilovers
jsut not how many refer to it around here
turknjd
12-03-2005, 09:43 PM
yeah, i know what coilovers are. the rears lower just fine, i adjusted them to where i want them, but the front, when adjusted all the way down still leave a little gap. ill try the kts camber plate, right now there on stock plates.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.