PDA

View Full Version : another i got a noise thread


SR240DET
12-01-2005, 03:43 PM
when im at idle.. or rev the engine while neutral there is no noise... when i take off... its a clank clank clank noise coming from under the car twards the rear of the engine and more around the shifter.. when im easy on it the noise is slight.. or not there... even when i press in the clutch its still there but not as bad...

now i just replaced my clutch and throw out bearing last summer i used ACT... what i didnt do was replace the pilot bearing.... some threads i searched and found explained pilot bearing is the problem... can anybody confirm this with me?

one more thing... would you guys trust autozone pilot bearings?

UPDATE: ok damnit the pedal is now stuck half way... and it operates just fine except now the pedal has sunk down half way and everything is too sudden... under car car i try to push the clutch fork and it wont move at all.... maby the metal clip has bent or moved out of place? im lost any help would be fine..

theicecreamdan
12-01-2005, 07:13 PM
check to make sure all your bolts holding the driveshaft together are there.

SR240DET
12-01-2005, 07:40 PM
yep been check.. iv been looking for a couple hours... looks like ill have to drop the tranny anyways...

SR240DET
12-01-2005, 09:16 PM
ok.. i looked over everything one more time.. and my u joint or whatever on my s14 is fucked up... its really loose and there is alot of play... but that doesnt answer my clutch pedal being stuck half way...

!Zar!
12-02-2005, 02:14 AM
Can you pull your clutch back up with your hand/foot? Or is it actualy stuck. Because it could be you need a slave cylinder.

SR240DET
12-02-2005, 09:52 AM
since we used a s14 drive shaft on a s13 sohc how come i couldnt use a s13 drive shaft on a s14?