300zx calipers

[ernpob]

--------------------------------------------------------------------------------
Rebuilt 300zx Iron calipers for $200.00 coming in 1 week
Rebuilt 300zx Aluminum calipers for $250.00. includes shipping
30mm (measured with micrometer)
sand blasted
new o-rings and gaskets.
comes with clips, springs, pins, and shims.
no pads (get your own from Pep Boys)
No 300zx master brake cylinder (also get it from Pep Boys for $50.00)

I know what you guys are thinking way should I buy these calipers and not the others. I'll tell you why, PITS, thats why. All those calipers you see for sale rebuilt or not could have dangerous pitting on the pistons. This pitting could cause brake failure and no one tells you this but I do. When I rebuild my calipers, I micropolish the pistons to a mirror like finish. So smooth, the absoult best seal between the pistons and the o-rings. I also clean out the tubes inside the calipers. Dangerous amounts of sand from sandblasting could have found its way to these tubes, but I dont take the chance. I completely disassemble the calipers to clean out these tubes.

Check out this link for the pics
http://www.imagestation.com/album/index.html?id=2117573300.

I only take paypal or cash on pickup.

PLEASE SEND QUESTIONS TO
[email protected]

NO REPLYS, EMAILS ONLY

p.s. check out my other Imagestation albums for some hot import model pics from D1 and the JGTC.
__________________

[punch]

I am interested in the aluminium calipers, shoot me an e-mail [email protected]

[Liger]

link failed

are these complete front and back?

[ernpob]

Just the fronts and please send request and responses to
[email protected]

[zads]

Just so you know.

Quoted from 300zx factory service manual:
"Caution:
Piston sliding surface is plated. Do not polish with emery paper even if rust or foreign materials are stuck to sliding surface."

[CHARLIE2020]

You got email.......I've got Q45 brakes all around right now and im running G35c wheels and in the front I got about 2inch's of room until my Q45 calipers could even contact the spokes on the inner side so I need to find out if these would fit becasue I will not use spacers.

[ernpob]

Thanks for the info, but I did not use emery cloth on the pistons but a polishing compound.