z32 swap problem

[frosted619]

hi i have a 95 s14 and i just did the z32 brake swap. I did the rears first and added the 1" MC (I also bled the brakes). I drove it around and it worked fine. After that i did the front brakes and bled the brakes and i have no pedal. the pedal just goes down to the firewall i have no idea what to do can someone please help? I hate asking because i know its something stupid but can someone please help? thanks --

[luckyrb13]

Check to make sure you put the calipers with the bleeders facing upwards. I did this the first time i put on z32 brakes on my 13 if the bleeder is facing down you wont be able to get the air it took me like two hours to figure it out. hope that helps.

[Dousan_PG]

i agreee that would be theproblem
its obviously not the rear so focus on what you did wrong on the fronts
good luck

[frosted619]

you guys are awesome thanks, but, how exactly do i do that? do i take the bleeder out or can i position it so that it is on top?

[Dousan_PG]

you might have put the left caliper on the right side and vise versa
or you got two left/right instead of one of each

[sncs14]

you might have put the left caliper on the right side and vise versa
or you got two left/right instead of one of each

yeah, switch the fronts around

[Al_S14]

is your s 14 auto or manual... please post how it feels when you get a chance.

I am trying to see what master cylinder to use with full Z32 brakes before i put them on but every damn person has different coments on how it feels .