PDA

View Full Version : Greddy turbo outlet, SR cyclinder head...

Bdubs
11-08-2005, 06:07 PM
I have a greddy turbo outlet, o2 housing that i am not using anymore, it is in perfect condition, had about 2000 miles run through it. Much nicer then the cheapo's. 80 shipped

I also have a SR valve cover for sale, make me an offer, and you can have it! like 30 bucks

SR cyclinder head, nothing ever happened to this head, I bought a spare motor, just for back up build up purposes, and this was the head on it. And as of right now I have 4 SR heads, and I really only need 2-3 so this one needs to go. 200 OBO.
viscid240
11-08-2005, 08:13 PM
s13 or 14?
element240
11-08-2005, 09:50 PM
where in ohio are you? might be interested in v.c.
VitaminT
11-08-2005, 11:03 PM
Email sent earlier.
Sirk
11-08-2005, 11:16 PM
Interested in the greddy outlet, let me know whats up.
Bdubs
11-08-2005, 11:50 PM
everything is off s13 SR. Oh I have not had a chance to take the valves out the cylinder head, so you can either ask me to take them out, or if you want them then they are yours!

As far as the greddy turbo outlet, PAYPAL [email protected], and I will ship it out ASAP http://community.webshots.com/user/williser93
Picutures of the outlet can be found there, its a really nice bolt on.

And I am just north of columbus, near the polaris area. If your interested in meeting up just shoot me a PM
nrg
11-09-2005, 12:28 AM
sent PM for turbo elbow
Bdubs
11-09-2005, 09:35 AM
PMs and emails recieved and replied.
Secretsquirrel
11-09-2005, 11:43 AM
PM sent for 02 housing




SS
Bdubs
11-09-2005, 12:03 PM
replied, lots of interst on the turbo elbow/ 02 housing, but no payment yet.
silverarrow27
11-09-2005, 12:36 PM
I was interested until I saw the pictures of the greddy o2. It does not include the shorter studs to go onto the turbo side so you can perfectly mount the o2 extension. Using the longer stock studs on the stock t25/t28 or any variant will not work with the greddy o2.
nrg
11-09-2005, 02:06 PM
yep, no studs, so it's pretty much useless heh.
Bdubs
11-09-2005, 07:17 PM
I mean I can source some studs if you guys need them its pretty easy to get them, I do not have that turbo anymore so you will have to tell me the thread pitch and length and I can make it happen (No extra fee). And the studs for the downpipe are there, and I never used longer studs. Oh well still for sale.
element240
11-09-2005, 09:18 PM
It does not include the shorter studs to go onto the turbo side so you can perfectly mount the o2 extension. Using the longer stock studs on the stock t25/t28 or any variant will not work with the greddy o2.

move a couple of stock studs and use a few bolts and it will work. i didn't like the supplied shorter greddy studs because they were too short for lock washers etc.
VitaminT
11-09-2005, 09:39 PM
Does it include the O2 sensor adapter?
Bdubs
11-10-2005, 10:31 AM
what is this adapter you speak of? The o2 sensor i had in there needed no such adapter. I have all the studs you need as well for this thing. I just want ride of it 60 bucks shipped!
nrg
11-10-2005, 01:54 PM
http://store1.yimg.com/I/phase2motorsports_1871_8591018
see that nut/adapter in the bag? that mounts the sr20 O2 into the elbow.
SILten
11-13-2005, 12:45 PM
Hello, i am seriously interested in one of the heads, as mine is no good. The head i have is a 52f casting with cooling vanes on the front. Do you have a similar? plz email me any info/ pics to [email protected]
TRGcoating
11-15-2005, 11:36 PM
still got the VC? If so i'll take it.