how do i remove the mani and turbo?

[BoiWiDNrg]

Yesterday i discover a coolant leak from the turbo, so today i wanted to take off the mani and turbo to get to the turbo line. I took out the air filter and pipe, intercooler piping, the 8 nuts from the manifold, all i can see that is left are the down pipe nuts (cant get to it yet cuz i dont have a 14mm socket that is deep enough). Is there anything else that i need to remove to take the mani and turbo out?? Does anyone know where i can get the step by step guide to replacing the turbo lines? Thanks for helping!


Samson

[Sil Beer S13]

get the FSM.

done.

[.::SR20_240::.]

you need to take off the oil feed, return, coolant lines out as well or you'll be yanking on those forever lol

[theicecreamdan]

get some glasses, if you cant see what's holding stuff on you arent looking hard enough.

you dont need an FSM to remove a turbo.

[NemeGuero]

You can't do it yourself. You need special tools like knowledge and deductive reasoning and logic. Call up your local garages and make sure they have the tools first. Shouldnt charge you more than an hours worth of work.

[golfer17]

http://www.zilvia.net/faqs/faqs.asp

here ya go, this link to the fsm should help ya out. it shouldnt be too difficult though to see what needs to be taken off. i didnt consult the fsm when i pulled mine off.

[BoiWiDNrg]

i got it off!!!...i only posted this question, cuz i never taken one off before and didnt want to do things that i was going to regret.


Samson

[theicecreamdan]

make sure you post here when you're about to change a spare tire on the side of the road. Could get scary.

[Ess14]

damn..... this tread was increadibly humorously harsh and pointless

[SochBAT]

take it to a shop.

Done and Doner.

[NemeGuero]

i got it off!!!...i only posted this question, cuz i never taken one off before and didnt want to do things that i was going to regret.


Samson

take it to a shop.

Done and Doner.
reading owns you