View Full Version : Auto-> Manual ecu prob
zenki21
10-31-2005, 10:43 AM
Hey guys I'm a lil confused I had my auto to manual swap proformed by heavythrottle. I had all the parts and the swap was perfect except the cel won't go off. I had the swap done in march and now it's time for inspection. These codes keep popping up(p0130,p0335,p0705). One is for the o2 sensor and the others are for other sensors. I want to know are the sensors really broke or is it due to the swap. By the way I swapped ecu's. Thanks in advance. The motor is the stock motor my car is a 96 240sx
S14DB
10-31-2005, 01:20 PM
You use a Manual or Auto ECU?
zenki21
10-31-2005, 01:24 PM
I used a manual ecu the same one from the tranny. Also mods sorry for double posting my browser froze. Please delete the other post.
drift freaq
10-31-2005, 01:32 PM
if you used the auto ecu it will throw codes on a 96. if Heavy Throttle did it for you then I would guess they would have told if it was the auto ecu still. I would hope. Unless you tell us what other sensors the codes are for we really cannot answer your question completely. I would say a o2 sensor code has nothing to do with your trans and that you probably have a bad o2 sensor. On the others its like I said earlier plus you have to make sure you do not have a auto ecu in there.
ai_jo
10-31-2005, 02:56 PM
same problem with mine. swapped ecu, original place said ecu burned. dunno if it's the same
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.