17x7 +35 on s13 hatch???

[sj250]

Can anyone tell me how sunk in those would be and what size spacer is required to get them flush?? I am not buying these so don't tell me how shitty they are. I am trying to sell some that I have laying around and the guy wants to know. Thanks for any help.

[OptionZero]

very frickin sunken. He could likely fit another inch and a half of rim (and accompanying tire) in there with that offset before needing to roll even.
You would need a 35mm spacer to get it jdm tyte.

If someone is buying them and asking about flushness, they probably don't know anything about wheels, so you could theoretically tell them anything and they would have no idea what was going on. Hope this helps your sale.

Oh yeah, don't mention coilover clearance.

[krustindumm]

sad but true, 35mm spacer would sit it flush on an S13.

[MakotoS13]

this from a guy with mexiflush rims in his sig.

17x7 +35 are the exact same fitment as S14 SE rims on my car.
http://makotoseven.com/240/level2/azeni1.jpg
they wont look bad but you can fit way more (especially in the back):

you's guys have been owned.

[Irukandji]

car is lookin good makoto

[Var]

i would run probably 15mm in the front and 25mm in the rear. It would be "good enough"..and if you're buying a 7 inch wide rim, you dont deserve flushness in the first place.

[sj250]

and if you're buying a 7 inch wide rim, you dont deserve flushness in the first place.

so true, that's why I went with 18x8 and 18x9.5 +20's on my car. Pulled fenders and super flush :D