FS: 240sx KA-T Turbo Kit (KA24DE)

[WYT R1CE]

Gone to ebay...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8004210715


Allow me to make this clear first...
WILL NOT PART OUT.


Parts:
Greaser turbo manifold (Logstyle)
T3/T04E .50/.70 trim
35mm wastegate
24x12x4 FMIC
Turbo XS RFL BOV


Exhaust:
3in downpipe.

Fuel:
SR 370cc injectors
Safc-1 ( Will write settings down and you can enter them)

Also inlcudes oil feed lines, but will need a new drain hose.


$1900. OBO

Pre-Tuned, Made [email protected] on stock slipping clutch


Virginia Beach, VA

Willing to Ship.


If you feel the need to insert unnecessary comments or remarks. Please Feel free Not to. The kit is set at its price because it is pre dyno tuned and just needs to be installed. :mephfawk:


EDIT:
Sorry I didnt clarify, yes it is complete. All piping, couplers, v band clamp for downpipe, complete downpipe heatwrapped, most vaccuum lines.

Basically the kit is just needed to be installed on a car. And then enter the settings that I write down for you into the SAFC.

[.::SR20_240::.]

ur kit cost more then a full sr20 swap =x

[WYT R1CE]

eek!! Same price and makes 40 more horsepower :eek:

Thanks, feel free to delete your un-needed comment.

[iknowyoulike]

i'd really like just the mani turbo wastegate and fmic and dp if you have it cause i have afc2 and wideband and sr 370 already..lemme know if you want to split...i know you said no part out..but shit i only need that stuff my t25 KA-T setup is slow...fast but giving me problems..lemme know if and when you want to sell it parted..i have money in hand...thanks.. noel[email protected]

[smellslikecurry]

ur kit cost more then a full sr20 swap =x

full sr swap for 1900???? your kidding me right

[punxva]

yo sup wyt? Dude if i had the money lol, i'd buy it, im in the greenbrier area, but ups for you, whatca getting next?

[ghostuss]

he is in CA where all SR importer are at. 2000 for a redtop swap is a "normal" going rate. You can get it way cheaper if you know the right ppl.

[Irukandji]

if you arent going to buy his kit .. dont post. The price is fair considering everything has been tuned and all you need to do is install it.

If its the same price as an sr swap, then go ahead and get one. Nobody asked you for your opinion.

free bump

[MoK]

im hungry.

[vinhisbored]

Is this a complete kit? You don't mention intercooler piping, turbo elbow, downpipe.. etc etc..

[Seven]

Nice kit... and if you were parting out I'd like buy the turbo, exhaust, and wastegate.
However the person above makes a good point ... no info on the piping or anything listed ... might wanna clarify on that man
bump for info need and a half-decent price

[WYT R1CE]

if you arent going to buy his kit .. dont post. The price is fair considering everything has been tuned and all you need to do is install it.

If its the same price as an sr swap, then go ahead and get one. Nobody asked you for your opinion.

free bump
:kiss: haha

Is this a complete kit? You don't mention intercooler piping, turbo elbow, downpipe.. etc etc..

Sorry I didnt clarify, yes it is complete. All piping, couplers, v band clamp for downpipe, complete downpipe heatwrapped, most vaccuum lines.

Basically the kit is just needed to be installed on a car. And then enter the settings that I write down for you into the SAFC.

[jy116]

sounds good... free bump

also, any dyno scans? KA-T... sounds good to me!

[WYT R1CE]

sounds good... free bump

also, any dyno scans? KA-T... sounds good to me!


I have the dyno sheet but no scanner, I took *attempted* to a picture of it, haha kinda big and blurry.



http://img373.imageshack.us/img373/1518/dyno0021ty.jpg
http://img373.imageshack.us/img373/3475/dyno0033ve.jpg

[S14DB]

im hungry.
Don't whore up the FS section.


That goes for the rest of yah too's.

[Jeff240sx]

He's pinked over that.. for a month.
-Jeff

[WYT R1CE]

Girlfriend hates my car hobby, I admit that I have a problem this is my 10th car Im only 20. So Id rather get rid of this and get a truck and not do shit to it, finish out college then get my shit straight. Then possibly come back to this hobby. But this doesnt mean that Ill be giving up my business venture.

[WYT R1CE]

up. headed home to take pics of the setup.

[The Riot Hero]

so will you part it out?


kidding, nice setup. ill be keepin an eye on this, free bump.

[WYT R1CE]

so will you part it out?


kidding, nice setup. ill be keepin an eye on this, free bump.



You'd be surprised at how many people still are PMing me asking me for only specific parts.





But here are the pics..



Red Top, This. haha. :fawkd:
http://img275.imageshack.us/img275/8913/engine0017vm.jpg


As you can see the intercooler is huge, on the exterior pic only half of it is showing.
http://img275.imageshack.us/img275/1655/engine0025we.jpg

Cold Pipe.
http://img275.imageshack.us/img275/6800/engine0036tu.jpg


Cold Pipe. 3" to TB
http://img125.imageshack.us/img125/4415/engine0045wj.jpg


Hot pipe. 2"-3"
http://img125.imageshack.us/img125/982/engine0059uj.jpg


Size of cutting the hood support. Only Cell Phone size, I will include some heat resistant tape so you can put it on also. But Note that the exhaust side has no clearance issues and No paint fading has occured. Tape is brown due to leaking exhaust manifold gasket. I fixed it to ensure there wouldnt be a leak by having the manifold to head flange machined and the turbo to manifold machined as well.

http://img159.imageshack.us/img159/5457/engine0072dd.jpg


Hide-away SAFC1 in the glove box. :tweak:
http://img304.imageshack.us/img304/5716/engine0082fd.jpg


Front Shot, the intercooler goes to almost the top of the lip on the bumper.

http://img183.imageshack.us/img183/9286/engine0065yu.jpghttp://img183.imageshack.us/img183/9286/engine0065yu.jpg

[WYT R1CE]

Oh and I will supply a better 90 degree Coupler than my temporary replacement.



Im replacing it with this turboXS coupler...

http://www.nipponpower.com/~nippon/prod_imgs/img-730-1-large.jpg

[WYT R1CE]

just realized my valve cover and spark plugs have a christmas theme goin on haha

[WYT R1CE]

up :smash:

[Big Daddy]

just realized my valve cover and spark plugs have a christmas theme goin on haha
hahahahaha! :coold: nice setup man. if i had the cash. :( :cry:

[WYT R1CE]

yea, im gunna list it on ebay tonight and see hwo that goes..

[Supreme]

Are you firm on that 1900? If so then bump for ya :)

[WYT R1CE]

gone to ebay...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8004210715

[Supreme]

Ill throw down on that :D

[S14DB]

eBay = Done