PDA

View Full Version : Monkey Magic Tension Rods for s13


West
02-21-2002, 02:21 PM
These are brand new and I might already have them sold but I just want to make sure I have them sold before I move out.

I have had Cusco and Knock off Tien Tension Rods for my s13 before and these are WAY better quality and alot thicker of a rod compared to all the others I have seen. These are still brand new and never been installed.

Brand new they cost $250 + Shipping from Japan and you would have to wait 4 months to get them

I will sell them to you for $225 Shipped.

http://www.zilvia.net/rides/west/mw13/MMTensionRods.jpg

AJ
02-21-2002, 02:30 PM
what do they do?

West
02-21-2002, 02:49 PM
They will allow for Caster adjustment. But most of all they help tighten the front end. This is the WAY better way to go about upgrading your worn out rubber bushing from your tension rod, like PDM sells. It will make the car handle alot better and make it feel way lighter in the front. It will stick around turns and make it seem like you cant mess up going around a turn thanks to so much responce and control given by the tension rods.

sykikchimp
02-21-2002, 04:11 PM
#### You!..  lol  I just bought the ones from Projectsilvia.  If I only knew you were going to be selling them I would have bought yours.  These are the ones I bought:
http://www.rhvariations.com/projectsilvia/%7Eimages/rsps_s13tensionrods.JPG

Yours look much better <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('> pout

West
02-21-2002, 05:30 PM
Make sure when you install them they get on there like a MOFO. My project silvia ones had a problem on my old silver s13. Kyle called me today and said one came loose, the people I had install them always do good work so who knows.

240meowth
02-21-2002, 06:14 PM
any cheaper? &nbsp;i broke my tension rod couple weeks ago... i know, much sadness, and i had to find one in the junk yard, but the sad thing is, it didn't come w/ bolts, so i only have 1 bolt on it right now, from my broken rod... &nbsp;and i really don't have 225 <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/mad.gif" border="0" valign="absmiddle" alt=':angry:'>

West
02-21-2002, 07:00 PM
Sorry, I dont really want to sell these so Im not going down on price. I still might install them, but I feel I may have a dif 240 by the time I start doing all my stuff for my project car.

jupiterl
02-21-2002, 09:09 PM
Where did you get it ? I am looking for all different kind of tension rod but can't find one except cusco. Please send me link.

Grant
02-21-2002, 10:10 PM
dammit mark you jusss had to change the order to s13 rods didnt you??!?! :biggrin: j/k.. haha.

Grant
02-21-2002, 10:25 PM
well I put in my T/C rods today,
http://home.earthlink.net/~stofer007/tcrods.jpg
http://home.earthlink.net/~stofer007/tcrods1.jpg
http://home.earthlink.net/~stofer007/tcrods2.jpg

Mine are East Bear, but DAMMIT they aren't green!, Its all your fault Mark!! :wink: j/k

Grant
02-21-2002, 11:06 PM
by the way mark, keep the rods, you can install em, but then transfer them to your next car anyways.

camppain
02-21-2002, 11:51 PM
i'll buy em mark you take cred cards? let me know

[email protected]

due they come with diff nuts &amp; bolts or can u use the oem ones?

(Edited by camppain at 12:22 am on Feb. 22, 2002)

Grant
02-22-2002, 01:05 AM
they come with different ones, you have to use the supplied ones because the stock ones are on the arms

240meowth
02-22-2002, 01:32 AM
ahhh, i really want it!!! &nbsp;'cause mine is screwed up... &nbsp;can you hold it? &nbsp;i don't got the money on me now <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/mad.gif" border="0" valign="absmiddle" alt=':angry:'>

camppain
02-22-2002, 08:17 AM
so are they mine? i got the money

plastic anyone?

black0ut
02-22-2002, 10:34 AM
If you've got the money, why are you trying to pay for it in plastic, anyway? ;-)

West
02-22-2002, 10:55 AM
I still have to ask the local friend that wanted to buy them if he still wants them. I should know by today, if not then probly monday. Sorry for the delay, but its first come first serve.

Grant, you put those on yourself? Goddamb. I couldnt break the damb bolt on my old s13. Much less with a monkey wrench! Oh and please tell me you documented your install so we can put it up on the install page. If not then get you ass back down under there and re isntall em <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

Grant
02-22-2002, 12:52 PM
document the install? lol jack up the car, take off the front wheels, remove 3 bolts, and that's it!, and when u put it back on do the the reverse. oh yea. WD40 is your friend!!!
I woke up feeling really sore today though, use of power tools will help a lot.

and by the way, KEEP THE T/C RODS!!!


(Edited by Grant at 11:53 am on Feb. 22, 2002)

camppain
02-22-2002, 09:31 PM
ok well lemme know mark i'll be waitin.

and i'll do an install for you guys. (assuming i get em <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>)
pics and all