[email protected] KA24DET on DOT tires!!!!!!

[PSI240SX]

1996 full interior with a 275 lb. driver 225/50/16 Kuhmo victoracers. 20psi on pump gas. Heres from the timeslip, I will have it scanned sometime next week.

R/T... .919  I know, I was sleepin!
60'... 2.011
330'.. 5.486
1/8... 8.337
mph... 87.34
1000.. 10.784
1/4... 12.842
MPH... 111.11

My clutch is not holding up either, its an ACT street disc with a power rating of only 287 lb/ft of torque. I need a new one and some sticky tires, more boost I might hit low 12's. I saw a grand national go 11.99 at only 110, so I got the mph for 11's!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>
Heres my link for mods and pics. http://www.nissaninfiniticlub.com/members/rides/jay/jay.htm

[Krunko]

awesome job, I thought you sold the car though.

[whateverjames]

very nice. i think low 12's is very possible. sounds like that grand national was getting some good launches.

[slow_accord]

Very nice job! &nbsp;I'm so jealous of you're car right now, maybe someday...

[SimpleS14]

whoa thats real nice &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

Is your car still for sale?? <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/huh.gif" border="0" valign="absmiddle" alt=':huh:'>

[PSI240SX]

Not for sale anymore... I thought I was going to have to spend a ton of money on tuning when all along it just needed Jim Wolf's latest version of the 720cc injector program to run that much damn faster. I only had to pay the shipping for the new program, that helped too hehe.

[BlackFox]

Hey PSI,
&nbsp; Where did you get your IC piping stuff from? How big is it? What about your APEXi Multichecker? Do they still make those?
I plan to do a similar setup as yours so I'll probably have more questions for you, thanks

Jeff <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[Grant]

Jay, you might want to try T.Y's setup with a bigger custom flywheel and clutch, or you can go with Dave's mroe cost effective solution (heavy duty truck clutch with a nissan harbody flywheel). I think also a 240z clutch fits on the 240sx but has more clamping force. That should help the clutch problems hehe. Just a suggestion (well you might already know.)..

Glad you are keeping the car. I'm sure you can get it to run 11's without too much effort.

[TonysS13]

wow great job

[PSI240SX]

BlackFox- a guy named Mark that now works at a place called Titanmotorsports here in orlando made them for me out of U-bends, 2 1/4 before the I/C and 2 1/2 after it. Multichecker came with the car when I bough it, no they dont make them anymore. Mark was piloting a supra last night that went [email protected] on freaking drag radials!!! It's a new record haha, I'm happy for the guys at Titan, they worked hard on that thing.

[HippoSleek]

good lord!

That's fast and you've got more. &nbsp;That's scary!

Nice job... on to 11's (where no US SR has gone before, IIRC)

[drift freaq]

Well, since Grant brought it up,
Jay , check it out . I am running a lightened Hardbody truck Flywheel dropped it to like 16lb's . Then you go out and get yourself a LUK Goldline heavy duty truck clutch . IT has 1,400 pounds of clamping force and 500 Lbs of holding torque. Best thing is it only costs $180
They Flywheel costs around $120 to lighten and balance,plus your not going to so light that you lose to much torque for your launchs.

Dave

[dorifto240]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Nice job... on to 11's (where no US SR has gone before, IIRC)
</td></tr></table><span id='postcolor'>

Jun has an s14 that I saw a video of run a 9.1.. I dont remember what the trap speed was but the video was on my Option silvia/180sx super-tuning video

Edit: this car ran the 9.1 in the good ol' U S of A

[240zx]

the JUN silvia has run 8.80's but it was a car that JUN brought over from Japan, it wasnt built in the US although it did run 8's in the US

Congrats on that run Jay gives us all someone to chase after &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[HippoSleek]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (dorifto240 @ April 20 2002,4:14)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Nice job... on to 11's (where no US SR has gone before, IIRC)
</td></tr></table><span id='postcolor'>

Jun has an s14 that I saw a video of run a 9.1.. I dont remember what the trap speed was but the video was on my Option silvia/180sx super-tuning video

Edit: this car ran the 9.1 in the good ol' U S of A</td></tr></table><span id='postcolor'>
I thought that car only ran that time in Japan? &nbsp;

Either way, I don't know that I would call a factory tuner tour car as a US SR. &nbsp;It's not to say it's not an SR and that the time wasn't in the US... &nbsp;By that, I meant someone in the 240 community with an SR.

[sleek240]

so u know that jus s14 run a stroked 2.0 liter sr witch is know 2.2 liters and something like 700 hp or something like that ...and jay thats an awsome time ..i ran &nbsp;13:76 AT 100.98 MPH.. the only difrence is that i have an automatic and yes .. its slipping .. i guess i'll call level 10 for a new tranny and converter...

[Nismos14]

holy crap, get some slicks and shoot that sucker again bro! kick ass!! &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>