PDA

View Full Version : how to plug stock turbo water lines

TheSparo
08-09-2005, 02:24 PM
title explains it all, on a red top SR, going to a oil cooled only turbo.... easiest way possible? or best? just give me some ideas... the swap will be done in one day, so i don't think shooting rtv in there w/ a hose plug will work in that time...
240witsr
08-09-2005, 06:44 PM
A bolt with crush washer.
TheSparo
08-09-2005, 08:29 PM
wow thanks man... i never thought of that....

not to be a dick but could you at least post the pitch of the thread in it?
Muzzy
08-10-2005, 12:23 AM
pitch is 1.25mm ho!!!! if im not mistaken. usually block bolts like that are
TheSparo
08-10-2005, 05:46 AM
bah... there an easy way to block the lines off w/o disconnecting them?
420sx
08-10-2005, 08:38 AM
yes. swap KA in.
PROJECTRB240SX
08-10-2005, 09:09 AM
Why Dont You Loop The Lines? Connect The Two Lines Together So You Don't Lose The Cross Flow.
TheSparo
08-10-2005, 10:28 AM
didn't know it was possible to do so.. they have the same flange?
statik
08-10-2005, 10:36 AM
cut the banjo feed line, flare it, cut the return line, flare it, get a piece of hose and 2 clamps, done