[FS] 1997 ka24de part out.

[Kreator]

80K miles. Everything used to run fine as far as i know. Bottom end has bad rings, but thats pretty much the only thing that used to be wrong with the engine.

Prices are very negotiable, just realize i'm not going to bother with anything if it's not worth it for me. add $7.50 shipping, unless noted otherwise.

Here goes:

cyll head - $65 + shipping. comes with front cover (not pictured).

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0018.JPG

intake manifold - $30 + shipping. no throttle body. includes both upper and lower manifolds.

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0019.JPG


short block - $40 pickup only. Comes with pulleys and good clutch/pressure plate. Water pump and oil pump are all there too. I can part out if you need something in particular. pm me.

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0009.JPG


valve cover - $20

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0017.JPG


stock front and rear calipers - $40

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0020.JPG


EGR shit - $15

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0010.JPG


distributor - $15

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0011.JPG


alternator - $15

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0013.JPG


exhaust mani w/ o2 sensor - $15 + shipping

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0015.JPG


starter - $15 ps pump already sold

http://www.frostfiend.com/~iminin/sale/zilvia/DSCF0023.JPG


300zx uprights - $30

http://www.frostfiend.com/~iminin/sale/uprights.jpg


Also have:

91 cams - $70 + shipping
5 lug cd&s i-rotors rotors - $15 used, but i believe still workable. have the rears as well, but one is cracked - will throw in for free though if you want them.

[adoboboy]

KADE oilpan?
how much? my email is [email protected]
Thanks

[Kreator]

oil pan has a ghetto bung on it... i can redo it if you need it for a kat (have a quality MIG now). or weld it shut. $50 and you weld it or $75 and i weld it?

[TEAMMiSCHiEFS14]

is this from a s14? if so, do you have the rear e-brake cables? PM me..

[vinhisbored]

Do you think that you could lower the price if I only wanted the top part of the intake manifold? It's make shipping cheaper too. Let me know.

[adoboboy]

oil pan has a ghetto bung on it... i can redo it if you need it for a kat (have a quality MIG now). or weld it shut. $50 and you weld it or $75 and i weld it?

Do you have pictures of the ghetto bung?

[Siizzzoooo]

DAMN i want that short block!

it sure would be expensive to ship though :(

[HR Autoparts]

do you have the fuel injector rail and the power steering brackets?

[s13driver]

how much shipping the cyl head to 11236 ?

[Kreator]

TEAMMiSCHiEFS14 no sorry, no ebrake cables
vinhisbored problem is i'll have really hard time finding someone for just the lower part, so i will pretty much completely loose out on that deal. now if you find someone who wants the lower part, you guys can split it any way you want. But anyways, if i decide to sell just the top part, how much of a drop you are interrested in?
adoboboy they are kinda hard to get as the engine sits on a tire, and i don't have a picker handy at the moment. i'll try my best to take pics of it today, but for now i'll just say one word: jbweld. :)
Siizzzoooo heh, no doubt
halfrice no injectors, will have to check on ps brackets... pretty sure i have them, just dont remember where :)
s13driver will give ya an estimate once i get home and figure out how much that thing weighs

[adoboboy]

TEAMMiSCHiEFS14 adoboboy they are kinda hard to get as the engine sits on a tire, and i don't have a picker handy at the moment. i'll try my best to take pics of it today, but for now i'll just say one word: jbweld. :)


I need the bung for KA-t. If it will hold oil w/o leaking, it should be fine. So 50 shipped? :D

[OpHaScHiLlM]

i need that distributor!!!! i will send you $25 money order. please e-mail me your address at [email protected] - seriously save that for me, mine just went out 30 minutes ago:(

[Kreator]

I need the bung for KA-t. If it will hold oil w/o leaking, it should be fine. So 50 shipped? :D

50 shipped as is? sounds fine with me, but i doubt you will be satisfied with running it "as is" - doesn't leak much, but leaks some

OpHaScHiLlM you got mail

[turbo_240sx]

I need a few things. head, valve cover, and the distributer how much? I would like to have it Asap. i don't get on the net much so give me a call at 1 804-832-0355, like i said need Asap

[adoboboy]

50 shipped as is? sounds fine with me, but i doubt you will be satisfied with running it "as is" - doesn't leak much, but leaks some


Whats your paypal addy?

[turbo_240sx]

23175. Um.. like a said need soon. so give me a call or leave a number i can reach you at

[Monooxide]

Ill email you or you can email me [email protected]

[turbo_240sx]

Hey man let me know what's up or something, would like to get soon

[Kreator]

Hey man let me know what's up or something, would like to get soon

email sent

[turbo_240sx]

Hey man, i never got an e-mail the best way to get me is over the phone, but i do need those things asap, so give me a call at 1 804 832 0355, or leave me a number i can reach you at, or you can try e-mail again, it's [email protected]

[Kreator]

Hey man, i never got an e-mail the best way to get me is over the phone, but i do need those things asap, so give me a call at 1 804 832 0355, or leave me a number i can reach you at, or you can try e-mail again, it's [email protected]

sent an email again. if it doesn't get through i'll give you a call in about 4 hours (at work right now)

[Monooxide]

I sent 2 emails I think? I want the valve cover ASAP. [email protected]

[adoboboy]

how are those pix of the oil pan? I'd like to see what your talking about =)

[vinhisbored]

Uh.. if it was total, could you tell me how much it would cost (shipped) for the intake manifold to the 92551? Lemmi know and I'll see.

[Dunkee]

I'll take your rear brake calipers IF they are not siezed (make sure the sliders are good too). I actually only need the driver side but I'll take them both. Email me how much and were to paypal. [email protected] They are S14, right?

[turbo_240sx]

Hey, got the e-mail, let me know

[ghostuss]

PMed you on a few things.

[209gopeder]

Hey do you have the harness for the motor? give me a call at 209-993-9325

[209gopeder]

Opps 209-993-9304

[elphkotm]

Got a driveshaft maybe?

[turbo_240sx]

What up with the parts man i really need them, let me know something

[adoboboy]

I'll take your rear brake calipers IF they are not siezed (make sure the sliders are good too). I actually only need the driver side but I'll take them both. Email me how much and were to paypal. [email protected] They are S14, right?

I'll take the passenger side. Dunkee lives in Jersey, im right around there as well. How much shipped to 10976?

[d4vech3n]

do you have the ecu and is it manual? I'm in jersey

[Kreator]

no driveshaft, no ecu, no harness
$30 shipped for the 2 calipers, if i ship them together.

[prew]

do you have the power steering pump? pm me if you do.

[vinhisbored]

I PM'd you about the intake mainfold.