PDA

View Full Version : 89 240sx


knghtryde
08-09-2005, 10:45 AM
Here's my 240sx I've been playing with the idea of selling cause of financial problems. It has been heavily modified. It is an 89 but has alot more power then a twin cam. Has fidanza flywheel, 6 puck clutch, short throw shifter, cold air intake, obx headers, nology wires and core enhancer, suspension has over $6000 invested, steal braided break and clutch lines, M3 mirrors, East Bear headlights, kaminari body kit, Deep dish wheels (17x7.5 front/17x8.5 rear)... I've invested a lot of my own time into this car and about $8000 dollars. The car has many other upgrades that are not listed. The tranny mount has been replaced with a nismo mount and I used a Tanabe shifter stabalizer.

The engine was rebuilt about 25,000 miles ago. When it was rebuilt it was prept for a turbo install. The oil pan has been taped and pluged for an oil return line. There is a tap and plug for the oil feed line. I also have Q45 calipers and pads, and a brand new set of cross-drilled slotted rotors, the rotors just need to be drilled to fit the 4 lug pattern.

I will include a Stock SR side mount intercooler to the buyer.

Those of you who know me, know that I do know what I'm talking about when it comes to my car, but right now I'm having alot of financial problems that I need to fix. Someone make a resonable offer, and please no low balling I know what the car is worth.

This tread will be good until I can find some other means to get some money. I'm really in need so I'm trying every option at this point in time.

E-mail me at [email protected] a picture. I don't know how to attach them.

werwuryoantenaz
08-09-2005, 10:58 AM
if you are interested on a trade...if not its dont worry about it..thx
send pic to [email protected]

kazuo
08-10-2005, 01:19 AM
David is a dummy so here's some pics and a full list of the modifications to his vehicle.

Suspension:
Rear Toe Rods
Rear Traction Rods
Rear Upper Control Arms
White Line Rear Lower Control Arm Bushings
TC Rods
Tien Inner and Outer Tie Rods
White Line Front Lower Control Arm Bushings
Cusco Front Under Brace
Rear Lower Brace
Front Upper Strut Tower Brace
Rear Upper Strut Tower Brace
Suspension Techniques Sway Bars
Rear Subframe Bushings (Not Installed)

Brakes:
Rear Slotted Cross Drilled Rotors
Front S13 Slotted Cross Drilled Rotors
Steal Braided Brake Lines Front and Rear
Q45 Calipers (Not Installed)
Q45 Brake Pads Brand New (Not Installed)
Q45 Drilled and Slotted Rotors (Need to be drilled to 4 lug/ Not Installed)

Transmission:
Short Throw Shifter
Nismo Tyranny Mount
Fidanza Lightened Flywheel
6-Puck Race Clutch
Tanabe Tyranny Mount Insert
Tanabe Shifter Stabilizer

Engine Bay:
OBX Chrome Header
Cold Air Intake
Nology Spark Plug Wires
Nology Coil Heater
Flowmaster Exhaust
Engine Rebuild 25K miles Ago
Oil Pan Tapped for Oil Return Line (Has Cap)
Block Tapped for Oil Feed Line (Has Cap)
Nismo Radiator Cap
Nismo Oil File Cap
Walboro Fuel Pump

Interior:
S14 Seats
Oil Pressure Gauge
A/F Gauge
Boost/Vacuum Gauge
Nismo Shift Knob
Steering Column Gauge Pod (Not Installed)

Wheels:
Front 17x7.5 red with chrome lip
Rear 17x8.5 red with chrome lip
Front 215x45x17 Tires
Rear 225x45x17 Tires

Body:
East Bear Headlights
M3 Mirrors
Kaminari Body Kit
Raised Hood

There might be other stuff that I can't remember

And here are some pics.

http://www.lazypenguin.net/poop/munoz1.jpg
http://www.lazypenguin.net/poop/munoz2.jpg
http://www.lazypenguin.net/poop/munoz3.jpg
http://www.lazypenguin.net/poop/munoz4.jpg
http://www.lazypenguin.net/poop/munoz5.jpg

Remember, THIS IS NOT MY CAR, NOR IS IT MY DEAL. Just helping my friend out by hosting pics for him and getting more info on the car for you guys so you know what to offer.

Help him out, he needs $$$.

PEACE

maverick27
08-10-2005, 04:40 AM
how much if u take everything off?