rim_bender
07-09-2005, 05:45 PM
ok, this is my second SR20 in my car. The first harness had all the wires for A/C.
Ok, following heavy throttles wireing diagram for the plugs at the battery tray. There is suppose to be 2 wires comming from the SR harness side for A/C, and two wires from the KA/240 side for A/C.
Of course i have the 2 wires rfim the KA/240 side, but i only have 1 A/C wire from the SR20 harness side. I hooked up the two that matched up but i have on leftover wire on the KA/240 side. I knw some other people have had this same issue so wat did yall do? Where do i get the other wire form to connect it to the leftover wire on the KA/240 side.
And the last thing is, for the compressor. I jsut connect the same wire that was connected to the compressor on the stock KA motor?
thanks and please help
Ok, following heavy throttles wireing diagram for the plugs at the battery tray. There is suppose to be 2 wires comming from the SR harness side for A/C, and two wires from the KA/240 side for A/C.
Of course i have the 2 wires rfim the KA/240 side, but i only have 1 A/C wire from the SR20 harness side. I hooked up the two that matched up but i have on leftover wire on the KA/240 side. I knw some other people have had this same issue so wat did yall do? Where do i get the other wire form to connect it to the leftover wire on the KA/240 side.
And the last thing is, for the compressor. I jsut connect the same wire that was connected to the compressor on the stock KA motor?
thanks and please help