FPR and stock vacuum,

[Goinsleeper]

I put my nismo fpr on and a gauge. for an almost stock sr, i should try to run about 36 psi right?
Also was wondering what vacuum i should be getting at idle. i think i might have a vac leak but im not positive.

thanks fellas

[Goinsleeper]

cmon this is quick and simple...

[statik]

i get about 16vac at idle, 20 when decelerating

[Goinsleeper]

that in bars or psi? at idle my profec gives -80 at 800 rpms. thats in psi.

[sdtouge]

that guys retarded hes talking about vacuum at idle on a boost gauge or osmetihng.

not sure what you should set it to, but ya that guy was not talking about dailing in a fpr.

also, you are not pulling 80 psi of vacuum at idle, stock shold be at like 20. i dont think it can go up at idle.

[Goinsleeper]

no i was talkin about what the fuel pressure should be for a stock sr. and i was also asking what the vacuum pull should be at idle for a stock sr.

[statik]

that guys retarded hes talking about vacuum at idle on a boost gauge or osmetihng.

...Also was wondering what vacuum i should be getting at idle. i think i might have a vac leak but im not positive.

learn to read jackass

my gauge shows about 16vac at idle, my profec says about -82 when im at idle, never displays any lower, perhaps it can't read that low