PDA

View Full Version : S13 SR20 Cruise control not working?


rim_bender
07-02-2005, 12:22 PM
Who has actually got thier cruise control to work on there SR20? I have swapped the KA throttle body with the KA tps onto my S13 SR20. I have hooked up both cables for throttle and cruise control. The cruise still doesnt work. Is there any wireing that needs to be done?

johngriff
07-03-2005, 03:24 AM
so, im assuming you didnt do the swap you'erself. Cruise is integrated into the KA harness, sorry bro, but you're sol.

John

rim_bender
07-03-2005, 08:53 AM
Actually i have done the last 2 sr swaps in my 240. I did the wireing myself and the car cant run more perfect. On any diagram or inof i have ever seen there is no information for wireing up cruise control for an s13 sr in an s13 chassis. If you think other wise prove me wrong by telling me how to do it.

And SOL? Even if i didnt do something its jsut wires, i can connect wires all day long, i dont see the problem. How do i get the cruise to work?

rim_bender
07-03-2005, 01:13 PM
so, im assuming you didnt do the swap you'erself. Cruise is integrated into the KA harness, sorry bro, but you're sol.

John


SOOOO, you gonna prove me wrong here or what?

johngriff
07-03-2005, 04:03 PM
There is one cruise control moduel on the PASS side, inside the dash that the old KA harness went to. I DO NOT know the wirign for this connector... but, if you take apart the ka harness from this conector, then cross referance the ecm pins against ka and SR, you could possibly be able to wire it up.


SO it would go, interior harness conector, ecm connector, then one of the next two should be for the cruise harness.

Sorry, i've not done the sr/cruise swap so my expertise on the subject ends there, but this is how the system works.

Good Luck,

John Griff

rim_bender
07-03-2005, 06:01 PM
There is one cruise control moduel on the PASS side, inside the dash that the old KA harness went to. I DO NOT know the wirign for this connector... but, if you take apart the ka harness from this conector, then cross referance the ecm pins against ka and SR, you could possibly be able to wire it up.


SO it would go, interior harness conector, ecm connector, then one of the next two should be for the cruise harness.

Sorry, i've not done the sr/cruise swap so my expertise on the subject ends there, but this is how the system works.

Good Luck,

John Griff
I have no idea what your talkign about. From inside the car. When oyu do an sr swap into an s13 chassis there is only two plugs you unplug form inside the car. There is the big blue ECU plug and the little white plug running up into the dash. That is it, no cruise control plugs inside the car. Now the cruise control module is underneath the hood, but you dont ever unplug that to do the swap. I dont even think there is an ewlectrical conection that goes to the module. The cruise control module is not connected to the main KA harness.

This si for an S13 SR20 in an S13 Chassis, maybe oyur getting this confused with an S14 car.