Master Guide For Buying Wheels!!

[samms95s14se]

This thread is for people to BREAKDOWN exactly what Tire and Wheel combination they have? But this will be different than most other posts.... you'll see what I mean in a moment....
Now i've looked at many many threads on wheels, tires, rims, and suspension pictures and so on but there is not one that will have it all or what I need, for EXAMPLE... I'll see a post where someone says they have an S14 with 17" but no offset given? or 17" with offset but no tire size? or 17" with offset and tire size but no picture? or 17" with offset, tire size and picture! but not the right angle on the picture to see how flush or stretched or whatever and no suspension setup. See what I mean!! :bash:

Also I started thinking that this thread can actually answer a lot of questions I never thought could be answered like you've seen these ones ..... "What coilovers are everyone using" and "Best Rucas, Tie rods, and so on to use" WELL DUH! If there are so many pages and pictures of what people are using what do you think could be the most popular to use? You could almost build stats out of it for fun?
Also if you have posted in here in the past and have a new setup add on to this with your new specs! And you get to whore out some pics too. Just trying to help control new threads and PM sent questions.

So here is a formula to follow to help people get the real perspective on wheels so if you could post all of this information using the numbers given or whatever you can fill in, but try to add it back in later when you have time. Good luck trying its alot!! But should help people from searching hundreds of threads that take up all your time to read through. NEW QUESTIONS ADDED.

1. S13/S14/S15 =
2. Suspension Setup/Brands =
3. Wheel/Rim Size front & back =
4. Brand of Wheel/Rim =
5. Offset front & back =
6. Spacer Size =
7. Tire Size/Brand front & back =
8. Alignment Specs =
9. Clear Zbrakes & what size brakes =
10. Fender Modifications: rolled/pulled =
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size =
13. Tire Pressure front & rear Track/Daily Driving =
14. Lip size front & Back =

Thanks everyone! THIS could be the Master Guide?
Also should be a STICKY ?? If you think about it.

[Dousan_PG]

sounds like a fun thread.
mods delete people who dont respond correctly
no "hey what" qs.
only pics to reply
make me a mod and i'll rule this thread w/ an iron fist

PM PEOPLE IF YOU HAVE A QUESTION

add number 7, alignment!!
and here's my beater..prekouki

1) s14 1995
2) too much, you only need to know Tanabe DD coilovers, -3 degrees camber
3) 17x9, 17x10 Desmond Regamaster
4) 9 +18, 10 +20
5) 215/45/17, 235/40/17
6) alignment at time pics taken: -2 camber front, -3 rear (changed now)

http://i2.photobucket.com/albums/y9/dousan_pg/s14_new/s14rear.jpg


http://i2.photobucket.com/albums/y9/dousan_pg/s14_new/DSC02826.jpg


8) clears front and rear z32 brakes
9) rear fenders hammered about 10mm-15mm if that...fronts rolled (hammered now). setup also works perfect for 18x9.5 +12 (Work Emotion) with a 235/40/17

[SilviaDriver]

8] clear zbrakes and what size brakes and if spacer needed
9] fender modifications: rolled/pulled how much

sorry sold all my wheels savin for VS-KFs

you can delete my post after you entered #8/9 in

[samms95s14se]

Wow! no one but Dousan PG has any specs and pictures! and by the way GREAT job on the info and NICE pics!!! thats how you do it. So everyone wants to continue to ask random wheel and tire fitment questions just to see people reply back SEARCH?? and go back and forth for ever????

Can we get some members who posted pics in the picture threads to help out on this? Remember you can edit back in information that you don't have right now later, just skip numbers if you have to.

Ok let's try this....One More Time!!

[ThatGuy]

This won't get the coverage it needs being in the Tech Section. Moving it to Chat.

[KiDyNomiTe]

1. S13/S14/S15 = S13 Hatch
2. Suspension Setup = Silk Road RM/A8
3. Wheel/Rim Size front & back = 15x7.5
4. Brand of Wheel/Rim = SSR Reverse Mesh
5. Offset front & back = +7
6. Spacer Size = none used
7. Tire Size front & back = 195/50/15
8. Alignment Specs =
Front: 3.5 degrees camber/0 toe/7 degrees castor
Rear: A lot of camber (prolly 2.5-3)/0 toe
9. Clear Zbrakes & what size brakes = Have stock brakes, won't clear Zs
10. Fender Modifications: rolled/pulled = Rear fenders rolled slightly, but no need unless you run 60 profile tires
11. Picture.. from the side & down the side = Second pic, rear wheels are 16x8+32

http://img.photobucket.com/albums/v293/kidynomite/th_usdrift005.jpg (http://img.photobucket.com/albums/v293/kidynomite/usdrift005.jpg)
http://img.photobucket.com/albums/v293/kidynomite/th_ddc031.jpg (http://img.photobucket.com/albums/v293/kidynomite/ddc031.jpg)


1. S13/S14/S15 = S13 Hatch
2. Suspension Setup = Silk Road RM/A8
3. Wheel/Rim Size front & back = 15x7
4. Brand of Wheel/Rim = Riken Mesh
5. Offset front & back = +2
6. Spacer Size = none used
7. Tire Size front & back = 205/60/15
8. Alignment Specs =
Front: 3.5 degrees camber/0 toe/7 degrees castor
Rear: A lot of camber (prolly 2.5-3)/0 toe
9. Clear Zbrakes & what size brakes = Have stock brakes, won't clear Zs
10. Fender Modifications: rolled/pulled = Rear fenders rolled slightly, but no need unless 60 series tires
11. Picture.. from the side & down the side = Only on front, can't find any pics of them all around
http://img.photobucket.com/albums/v293/kidynomite/th_car005.jpg (http://img.photobucket.com/albums/v293/kidynomite/car005.jpg)

[lilredstiffy]

1. S13
2. flta2's
3. F 18x9 R18x9
4. Nissan ? BNR34 OEM
5. F +30 R +30
6. F 15mm R 15mm
7. F 225/40 st115 R 225/40 st115
8. F -3 camber, 7*caster R -2.2 camber
9. stock brakes
10. F rolled R rolled and pulled (about 5mm)
11.
ill get some new pictures soon, these will do for now
http://members.cox.net/fireboned/boil.jpg
http://members.cox.net/walton90/side.jpg

[Flybert]

1. S13
2. Apexi N1 PRO
3. 17x9 front and rear
4. Veilside Andrew
5. +17 front and rear
6. no spacer
7. 215/45/17 front and rear
8. -2 F, -2.4 R
9. Clears Z32
10. Just rolled with a hammer, now they are pulled in the rear and some fatter tires will go on

http://www.team-legacy.org/GhostVersion/Media_Section/Chris/Veilside_Flush.jpg
http://www.team-legacy.org/GhostVersion/Media_Section/Chris/Veilside_Front.jpg
http://www.team-legacy.org/GhostVersion/Media_Section/Chris/Veilside_Profile.jpg
http://www.team-legacy.org/GhostVersion/Media_Section/Chris/Veilside_Rear1.jpg

[Ritz S14]

s14
MR C/O
17x9+15 225 45 17
17x10+12 245 45 17 Falken st115
5Zigen FN10RC
What ever you get from a 3" drop front, and 4" drop in rear.
26mm clear z brakes, these suckers will clear 50mm brakes :)
Rears are pulled .75"

http://i2.photobucket.com/albums/y23/smogtech/PICT1184.jpg

http://i2.photobucket.com/albums/y23/smogtech/PICT1187.jpg

[p11driver]

1. S14
2. Tanabe sustec pro
3. 17x9 , 17x9
4. ADVAN SA3R
5. +22 , +22
6. none
7. 235/40 , 245/40
8. camber -2 front, -2.5 rear
9. Clear any breaks
10. no roll or pull
http://www.taboclothing.com/land-ho/IMG_0214.jpg

[S14DriftR]

1) s13 coupe
2) Tein HE
3) 16x7.5
4) Volk SF mesh
5) +22
6) 25mm kics bolt ons
7) 205/50/16F 225/50/16R(pictured, but normally 205/50's all 4)
8) -2.8f -2r
9)clears Zbrakes with spacers, does NOT clear Z brakes without the spacers
10) rear fenders pulled about 15mm, fronts rolled\

Rear with buldging 225/50's:
http://i2.photobucket.com/albums/y17/DriftDreamzSS/room008.jpg
http://i2.photobucket.com/albums/y17/DriftDreamzSS/room005.jpg

Front pics w/205/50/16's
http://photobucket.com/albums/y17/DriftDreamzSS/th_sigpic3.jpg
http://memimage.cardomain.net/member_images/11/web/359000-359999/359882_100_full.jpg

[AKADriver]

My old white car...

1) S13 coupe
2) KYB AGX/RS*R Race/HKS pillowball mounts
3) 16x7.5
4) Kosei K1
5) ET32 front and rear
6) none
7) 225/50R16
8) always changing, cleared everything with every alignment setting I threw at it
9) clears EVERYTHING
10) stock bodywork

http://mywebpages.comcast.net/akadriver1/images/s13wheels3.jpg

conservative setup. but I liked it a LOT. very versatile.

[BobbyBoy]

1. S13
2. KTS Coils
3. F 18x8.5 R 18x9.5
4. Enkei NT03+M
5. Offset F +38 R +27
6. Spacer F +30 R +30 (new offsets F +8 R -3)
7. Tires F 225/35/18 (soon to be 245/35/18) R 275/40/18 (soon to be 275/35/18)
8. No alignment specs
9. Clears Z brakes
10. +15mm Front +50mm Rear
http://members.roadfly.com/Stavros/IMG_7769s.jpg
http://members.roadfly.com/Stavros/IMG_7768s.jpg
http://members.roadfly.com/Stavros/IMG_7766.jpg
http://members.roadfly.com/Stavros/IMG_7767.jpg

[xVaporx]

1. S14
2. Tein FLEX coilovers, RUCA's, Rtoe arms
3. 18x9 F 18x10 R
4. Volk Racing SF Challenge
5. Offset front & back = +10, +11
6. I dont need no stinking spacer
7. 235/40/18 F 255/35/18 R AVS Sports (run a bit wider, like a 240/260)
8. -3 camber F, -2 camber rear
9. Z Tuner Z32 kit 12.3in rotors clears no spacer
10. Front +20mm over fenders, rears pulled ~25mm
http://www.tamparacing.com/photopost/data/500/medium/9595s14done8.JPG
http://www.tamparacing.com/photopost/data/500/medium/9595s14done6.JPG

[orion::S14]

1. S14
2. Tein HE (reasonably low, not "slammed")
3. 17x9 (all 4)
4. Enkei RPM2
5. Offset +40
6. 15mm spacer at all 4 corners (effectively +25 offset)
7. 235/45/17 (F), 255/40/17 (R) Kumho MX
8. -2.5 camber (F), -1.8 camber (R)
9. Z32 brakes (all 4 corners, wheel clear with or without the spacers)
10. Front fender untouched, rears *barely* rolled.
11. No good pics of the height/clearance, but here goes anyway:

http://www.ka24development.com/file_images/my_240sx.jpg

- Brian

[biggie]

Will be getting new wheels on soon (trying to sell new 17x8 FNs), but here are these for reference.

1. S13
2. D2 Coils (9/7 rates), pretty low
3. 17x7
4. Lenso Superlight (out of production)
5. +38 Offset
6. 5mm spacer all around
7. 215/45/17 Toyo Proxes FZ4s
8. -1.3 camber (F), -1.0 camber (R)
9. 30mm Z32 brakes on front (have to have spacer)
10. Front and Rear rolled just in case

http://img.photobucket.com/albums/v492/biggiechad/house2.jpg
http://img.photobucket.com/albums/v492/biggiechad/house9.jpg

[DriftSpecial180]

1. S13/S14/S15 = S13 Hatch
2. Suspension Setup =SilkRoad RM/A8
3. Wheel/Rim Size front & back =15x6
4. Brand of Wheel/Rim =Infiniti G20
5. Offset front & back =45
6. Spacer Size = None Yet...
7. Tire Size front & back =205/60/15
8. Alignment Specs =
9. Clear Zbrakes & what size brakes =Haha, No!!!
10. Fender Modifications: rolled/pulled =Haha, No!!! Again!!!
11. Picture.. from the side & down the side =
http://i2.photobucket.com/albums/y47/AnthonySil80/DSC01343.jpg
http://i2.photobucket.com/albums/y47/AnthonySil80/Solar1.jpg

P.S. I know they're baby, but a lot of people can't decided if they want the "type x" look, this should help them. I'll be the guinea pig. These are just temporary till i can get some work equip 03's

[samms95s14se]

Just thought I would bring this back in case anyone missed it the first time around. I know we all don't check the forum every single day or at least I dont.

Later,

[jookybanana]

1. S13/S14/S15 = S13
2. Suspension Setup = Zeal B6 (clears front coils by about 6mm)
3. Wheel/Rim Size front & back = 17x9 all around
4. Brand of Wheel/Rim = Titanium Bronze 5Zigen FN01R-C
5. Offset front & back = +20mm all around
6. Spacer Size = front 6mm (to clear coils), rear 10mm
7. Tire Size front & back = 215/40/17 falken fk451
8. Alignment Specs = front -2ish, rear -3ish
9. Clear Zbrakes & what size brakes = clears tt z brakes by like ~2"
10. Fender Modifications: rolled/pulled = rolled all around
11. Picture.. from the side & down the side =

http://s05.imagehost.org/1239/IMG_3174.JPG
http://s05.imagehost.org/1239/IMG_3178.JPG
http://s05.imagehost.org/1153/IMG_2527.JPG

[i-love-my-s14]

1. S14
2. H&R Springs, Stock struts
3. Front 17 x 8.5 Rear 17 x 9.5
4. M2-Hanabi DT-05R
5. Front offset +25 Rear offset +30
6. No Spacers
7. Front tire 245/40/17 Rear tire 255/40/17, Yokohama AVS ES 100s & Falken ST115s
8. ?
9. Clears stock brakes
10. Front fenders are rolled


http://www.imagestation.com/picture/sraid175/pd2b7453a73233faef8673dfbd8ae9005/f37723e0.jpg

http://www.imagestation.com/picture/sraid152/p7fc0d192d29e1f87e369d1cb04dc5ce6/f5b289e9.jpg

http://www.imagestation.com/picture/sraid152/pc8339e790cc808fec5cf08836115773f/f5b28d97.jpg

[Johny5]

1. S14
2. kts
3. F 18x9.5 R 18x9.5
4. Work Emotion CR Kai
5. F +12 F +12
6. 8mm spacer front (effectively making it +4 offset) 15mm spacer rear (effectively -3 offset)
7. F 235/40/18 ES100 R 235/40/18 FM901 rear
8. -3 camber front 8.2 caster 0 toe -3.5 camber rear companied with whatever toe-in that drop gives me
9. clears 2 sets of z brakes i'm sure :tweak:
10. rolled fenders front rear pulled 1"
11. total ugly shit coming up!

http://img52.imageshack.us/img52/6721/dscn12798dv.jpg
http://img59.imageshack.us/img59/5522/dscn12873op.jpg

[ILiveToDrift]

1. S13/S14/S15 = S14.5
2. Suspension Setup = KYB AGX w/ Sportlines
3. Wheel/Rim Size front & back = F:18x8, R:18x9
4. Brand of Wheel/Rim =Blitz Type=03
5. Offset front & back =F:32, R:30 (or somthing close to those)
6. Spacer Size =10mm in front to clear brakes
7. Tire Size front & back =F:245, R:255
8. Alignment Specs =
9. Clear Zbrakes & what size brakes =with spacer 90 300zx NA
10. Fender Modifications: rolled/pulled =wider conversion wenders
11. Picture.. from the side & down the side =
http://img.photobucket.com/albums/v725/bkremlap/P1000291.jpg
http://img.photobucket.com/albums/v725/bkremlap/P1000287.jpg

[chmercer]

1. s14 1995
2. KTS coils
3. front will be 18x10, rear 18x12
4. work equip m1
5. front -7, rear -20
6. none
7. front 245/35 rear 275/35
8. zero toe, front 7.5 caster -2.5 camber, rear -1.5 camber
9. clear z brakes by a mile
10. front will be cut and pulled oem, rear is version select overfenders
11. http://img214.imageshack.us/img214/5840/picture3aw.jpg

i will edit with new pics when i get the front on there and lower, dont have tires yet

[CleanS14]

8] clear zbrakes and what size brakes and if spacer needed
9] fender modifications: rolled/pulled how much

sorry sold all my wheels savin for VS-KFs

you can delete my post after you entered #8/9 in

VSKF's are gay... :mephfawk:

Daily Pimpin'
http://www.onetongarage.com/jays14/bayback.jpg
1. S13/S14/S15 = s14
2. Suspension Setup = a lot of stuff
3. Wheel/Rim Size front & back = 18/19
4. Brand of Wheel/Rim = Chrome Work VS KF
5. Offset front & back = Perfect
6. Spacer Size = None
7. Tire Size front & back = 225/40/18, 245/35/19
8. Alignment Specs = camber -2.7f, -2r, 7.5 caster, 0 toe
9. Clear Zbrakes & what size brakes = of course
10. Fender Modifications: rolled/pulled = slight roll no pull by mr. Dousan

Track Shoes
http://www.onetongarage.com/jays14/newtrackshoes.jpg
http://www.mophos.net/images/stories/album01/s14_08.jpg
http://www.mophos.net/images/stories/album01/s14_12.jpg
http://www.mophos.net/images/stories/album01/s14_13.jpg
1. S13/S14/S15 = s14
2. Suspension Setup = a lot of stuff
3. Wheel/Rim Size front & back = 18x9, 18x10
4. Brand of Wheel/Rim = Burning Black Work VS KF
5. Offset front & back = Perfect
6. Spacer Size = None
7. Tire Size front & back = 225/40/18, 235/40/18
8. Alignment Specs = camber -2.7f, -2r, 7.5 caster, 0 toe
9. Clear Zbrakes & what size brakes = of course
10. Fender Modifications: rolled/pulled = slight roll no pull by mr. Dousan

[KiDyNomiTe]

1. S13/S14/S15 = S13 Hatch
2. Suspension Setup = Silk Road RM/A8
3. Wheel/Rim Size front & back = F: 15x6.5 R:15x7.5
4. Brand of Wheel/Rim = F: Longchamp XR4 R:SSR Reverse Mesh
5. Offset front & back = F: +11 R: +7
6. Spacer Size = none used
7. Tire Size front & back = 195/50/15
8. Alignment Specs =
Front: 3.5 degrees camber/0 toe/7 degrees castor
Rear: A lot of camber (prolly 2.5-3)/0 toe
9. Clear Zbrakes & what size brakes = Have stock brakes, won't clear Zs
10. Fender Modifications: rolled/pulled = Rear fenders rolled slightly, but no need unless you run 60 profile tires
11. Picture..
http://img.photobucket.com/albums/v293/kidynomite/P2050883.jpg

[Ritz S14]

1. S14
2. MR C/O Nismo TR Bushings
3. 18x9 18x10
4. Work Termist TM1
5. Offset front & back =?? leaves a nice dish though
6. Spacer Size = 0
7. Tire Size front & back = 225 40 18/245 40 18
8. Alignment Specs = None at the moment
9. Clear zbrakes front and rear
10. Front rolled, rear pulled
11. Picture.. from the side & down the side =

http://i2.photobucket.com/albums/y23/smogtech/PICT1598.jpg
http://i2.photobucket.com/albums/y23/smogtech/1516.jpg

[Gjohnson7]

1. S13 Hatch
2. Stock Supension
3. 17 x 9 front and rear
4. Falken Hanabi
5. +20mm front and rear
6. no spacer
7. f 225/40/17 r 235/45/17
8. Stock alignment
9. Tons of space so, I'm sure they will clear Z brakes. Just don't have them yet.
10. Will roll rear soon as possible. Rubs during hard cornering. Must roll before droping.

http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_120_full.jpg
http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_127_full.jpg
http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_126_full.jpg

[s14dr1ft3r]

Just thought I would bring this back. Good piece of info for those looking for wheels. Anyone got a s14 with 18x8.5 F and 18x9.5 R with a Tein Flex/Super Drift C/O setup? Would like to see pics of that! Looking for the best offset/tire sizes. Thanks.

[snatch13]

good work for bringing it back... lets see some more white zenki s14's!!! preferably gold wheels...

[justinhustle]

1. S14
2. cusco comp zero 2, battle version arms
3. 18x9 F 18x10 R
4. Rays Gram Lite 57pro Face 2
5. Offset front & back = +22, +22
6. no spacers
7. 225/40/18 F 245/40/18 R Fuzion zri
8. -1 camber F, -3 camber rear
9. z32 brakes front, se rear
10. front rolled, rear rolled and pulled 5-7mm

http://img.photobucket.com/albums/v84/jsteed/flowersnshiiiit/DSC00630.jpg

http://img.photobucket.com/albums/v84/jsteed/flowersnshiiiit/DSC00648.jpg

[fliprayzin240sx]

1. S13/S14/S15 = s14
2. Suspension Setup = CRAP: Eibach sportlines/tokicos
3. Wheel/Rim Size front & back = 17x10 all around
4. Brand of Wheel/Rim = 5-zigen FN01R
5. Offset front & back = +12 all around
6. Spacer Size = None
7. Tire Size front & back = 245/40 front 255/40 rear
8. Alignment Specs = -.9 fronts -1.5 rear
9. Clear Zbrakes & what size brakes = clears 30mm Z brakes
10. Fender Modifications: rolled/pulled = ghetto pulled fenders all around

http://pxracing.com/gallery/albums/userpics/10011/May05%20029_edited.jpg

[CHARLIE2020]

1. S13
2. Stock dampers and TEIN S Tech springs
3. 18x8 all around
4. Infiniti/Nissan G35c OEM Wheels
5. +30 all around
6. No Spacers
7. 225/40/18 front 225/45/18 rear
8. Alignment Specs = Not sure probaly 1.5 degree front and 2.0 rear
9. Clears Q45 Brakes 26mm has lots of room
10. No Fender Modifications

http://img.photobucket.com/albums/v249/charlie2020/P1010003z.jpg
http://img.photobucket.com/albums/v249/charlie2020/P101000511z.jpg
http://img.photobucket.com/albums/v249/charlie2020/32359343.jpg
http://img.photobucket.com/albums/v249/charlie2020/P1010007z.jpg
http://img.photobucket.com/albums/v249/charlie2020/P1010006z.jpg
http://img.photobucket.com/albums/v249/charlie2020/P1010008z.jpg

[sykikchimp]

1. S13
2. Suspension Setup = JIC FLT-A2
3. Wheel/Rim Size front & back = 17x8 F 17x9 R
4. Brand of Wheel/Rim = Nismo LM-GT2
5. Offset front & back = +35 front +38 Rear
6. Spacer Size = none
7. Tire Size front & back = 215/45 front and rear
8. Alignment Specs = camber: -2.5F -1.7R toe: 0 all round
9. Clear Zbrakes & what size brakes = yes clear Z-brakes
10. Fender Modifications: rolled/pulled = none
11. Picture.. from the side & down the side =

http://charles.sykikchimp.org/images/Nismo/side.jpg
http://charles.sykikchimp.org/images/Nismo/front-wheel-flush.jpg
http://charles.sykikchimp.org/images/Nismo/rear-wheel-flush.jpg
http://charles.sykikchimp.org/images/Nismo/side-rear.jpg

[KwKouki]

1. 1993 s13 coupe
2. KYB AGX shocks / Espelir Active Super Down Springs
3. 15x7 front and back
4. Konig Rewind
5. +0 offset front and back
6. No spacer
7. Falken Zieks ze-512 195/60/15
8. No deliberate alignment, whatever camber the drop gave me *needs alignment bad though*
9. Unsure about Z-Brake clearance, stock s13 brakes
10. No fender mods *rear could be pulled a wee bit*

http://img209.imageshack.us/img209/4134/fakeasspanas9qx.jpg

http://img209.imageshack.us/img209/5719/meh6fd.jpg

http://img209.imageshack.us/img209/3323/meh49sd.jpg

[North240]

1. S13/S14/S15 = s14
2. Suspension Setup = tein soft techs & agxs
3. Wheel/Rim Size front & back = 17x8
4. Brand of Wheel/Rim = Mille miglia ht3
5. Offset front & back = a very conservative +35
6. Spacer Size = 0
7. Tire Size front & back = 215/45/17 front, 225/45/17 rear
8. Alignment Specs =just under 2 degrees front camber and 2.5 rear
9. Clear Zbrakes & what size brakes = yes
10. Fender Modifications: rolled/pulled = nope
11. Picture.. from the side & down the side =

Looking to upgrade more than a few things but hey they were cheap, at least i know they're weaksauce.
http://img.photobucket.com/albums/v498/North240/My240rear.jpg
http://img.photobucket.com/albums/v498/North240/Superunflush.jpg

[KOUKI KA-T]

1. S14
2. KTS coilovers
3. 17x9
4. Impul R5
5. +20 f/r
6. no spacers
7. 235-40-17 r-s2 f/r
8. Alignment= nightmare. To be taken care of this weekend
9. believe so
10. no fender mods, maybe roll slightly once alignment is corrected...
11....
http://img.photobucket.com/albums/v378/srhamlin/Dsc00870.jpg
http://img.photobucket.com/albums/v378/srhamlin/davidspics/226_2694.jpg
http://img.photobucket.com/albums/v378/srhamlin/davidspics/226_26832.jpg
http://img.photobucket.com/albums/v378/srhamlin/davidspics/226_2645.jpg

[upSLIDEdown]

1. S13
2. Megan coilovers
3. 18x8.5 & 18x9.5
4. Sportmax Racing 962
5. +35 F/R
6. 10mm spacer all around (+25 effective all around)
7. 225/40 F 245/40 R Falken ST-115
8. Alignment= nightmare. To be taken care of. Decent camber in the rear (at least -2.5-3) Fronts still need more spacer and more camber.
9. 30mm Z brakes/coilovers
10. Fenders rolled all around

http://img131.imageshack.us/img131/791/pict02801iz.jpg

http://img436.imageshack.us/img436/2818/pict02834zj.jpg

http://img436.imageshack.us/img436/600/pict02854ti.jpg

Bryan

[samms95s14se]

Updated Finally!!

1. S13/S14/S15 = S14
2. Suspension Setup = AGX with Tanabe DF210 springs- Powered by Max Ruca's & Toe Rods. Wicked Tunning's Tension & Tie Rods.
3. Wheel/Rim Size front & back = 18x9 front 18x10 rear Motegi Togue Wheels
5. Offset front & back = +12 front +30 rear
6. Spacer Size = None
7. Tire Size front & back = 235/40/18 front 265/35/18 rear
8. Alignment Specs = Done at Trueline El Cajon, CA
9. Clear Zbrakes & what size brakes = Front 30mm Z Brakes with 350z track rotors (not shown in picture) Rear stock brakes w Brembo Blanks & Metal Master Pads
10. Fender Modifications: rolled/pulled = Rolled Rears only
11. Picture.. from the side & down the side = See below

http://memimage.cardomain.net/member_images/12/web/756000-756999/756157_83_full.jpg
http://memimage.cardomain.net/member_images/12/web/756000-756999/756157_86_full.jpg

[s14dr1ft3r]

1. S13/S14/S15 = S14
2. Suspension Setup = Megan Racing Coilovers (Street)
3. Wheel/Rim Size front & back = 17x9 F/R
4. Brand of Wheel/Rim = Motegi Racing Touge - Yeah, they're crap but they work
5. Offset front & back = +24 F/R
6. Spacer Size = None
7. Tire Size front & back = 235/45 F/R
8. Alignment Specs = Horrible. Whatever I get with stock suspension arms and drop.
9. Clear Zbrakes & what size brakes = clears 26mm z32 brakes...not 30mm.
10. Fender Modifications: rolled/pulled = none...yet
11. Picture.. from the side & down the side =
http://memimage.cardomain.net/member_images/6/web/1410000-1410999/1410595_26_full.jpg
http://memimage.cardomain.net/member_images/6/web/1410000-1410999/1410595_23_full.jpg
http://memimage.cardomain.net/member_images/6/web/1410000-1410999/1410595_27_full.jpg

[jobestudios]

1. S13
2. Tokicko Blue Struts with some brand spring (came with car)
3. 15x7
4. Konig Rewind
5. +/- 0
6. No Spacer
7. 195/60
8. N/A
9. OEM brakes
10. No Fender Mods
11. http://www.hondasociety.net/uploads/pics/konigrewind15x7zerooffset.jpg
http://www.hondasociety.net/uploads/pics/konigrewind15x7zerooffsetfront.jpg
http://www.hondasociety.net/uploads/pics/konigrewind15x7zerooffsetrear.jpg

It will be lower soon enough, for now the handling of the current setup is fine.

[i8yourfwd]

1. S13 FB
2. Megan Coils
3. 15x7
4. Enkei Mesh
5. +/- 0
6. No Spacer
7. 225/50
8. Don't even know :)
9. OEM brakes
10. No Fender Mods
11.
http://img.photobucket.com/albums/v389/intelectualism/coils/REEMS-001.jpg
(SE's in the rear)

http://img.photobucket.com/albums/v389/intelectualism/coils/REEMS-002.jpg

[AmuroRay555]

Bringing this thread from the dead, I think a MOD should clean it up and sticky it. Anyways here it goes
1: S13
2: Megan Coilovers
3, 4, & 5: 17x8 +35 Zigens FN01R
6: 10mm front and 15mm rear spacers
7:235 40 17 Azenis ST115 all around
8: -2 camber front & -1 rear
9: Clears Q45 and Z32 brakes
10:rears rolled
I did not have the tires for the rear when I took the pics, but they look as flush IMO as the front
http://i27.photobucket.com/albums/c160/Dante319/Picture014.jpg
Here's a pic from the side so you could tell my ride height more or less
http://i27.photobucket.com/albums/c160/Dante319/Picture015.jpg

[Nizzan4u2nv]

1. S14
2. Megan Streets
10. Rolled fenders
Everything else, see below.

FN01rc
17x9 +15 (+0)(15mm spacer), 215/45/17
17x10 +12 (+7)(5m spacer), 235/45/17
http://memimage.cardomain.net/member_images/8/web/2216000-2216999/2216221_1_full.jpg

Sport Max 962
17x9 +35 (+0, -5)
(35mm spacer front, 40mm spacer rear)
215/45/17 all around
http://memimage.cardomain.net/member_images/8/web/2216000-2216999/2216221_26_full.jpg

Work Emotion Cr Kai
18x9.5 +12 (+7, -3) (5mm spacer front, 15mm spacer rear)
225/40/18 all around
http://memimage.cardomain.net/member_images/8/web/2216000-2216999/2216221_19_full.jpg

SSR Professor SP1
17x9 +6
17x10 -1
235/40/17 all around
http://memimage.cardomain.net/member_images/8/web/2216000-2216999/2216221_34_full.jpg

[jookybanana]

1. S13/S14/S15 = S13
2. Suspension Setup = Zeal B6 (clears front coils by about 4~5mm)
3. Wheel/Rim Size front & back = 18x9.5 all around
4. Brand of Wheel/Rim = Silver Work Emotion XT7
5. Offset front & back = +12mm all around
6. Spacer Size = none
7. Tire Size front & back = 225/40/18 falken fk451/fk452
8. Alignment Specs = front -2ish, rear -3ish
9. Clear Zbrakes & what size brakes = clears tt z brakes by 2.25"
10. Fender Modifications: rolled/pulled = fronts rolled and hammered inner fenders, rear rolled and pulled 5mm
11. Picture...=

http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_6535a.jpg

[-=RS13=-]

1. S13/S14/S15 = S13
2. Suspension Setup = Megan Track Series
3. Wheel/Rim Size front & back = 17x9 17x10
4. Brand of Wheel/Rim = Fno1rc's
5. Offset front & back = +15 front +35 rear
6. Spacer Size = 5mm on front to clear coilover (did not need the spacer on my d2's)
7. Tire Size front & back = 225/45/17 front (now a 235/45/17) 245/45/17 rear
8. Alignment Specs = front 3.0 rear 2.5 Zero toe 8 degree's of caster (stops front rubbing at full lock)
9. Clear Zbrakes & what size brakes = Will clear any type of brakes (3 inches over Z32's
10. Fender Modifications: Hammered lip up but no pull at all
11. Picture...=
http://img92.imageshack.us/img92/903/highresautoxkq3.jpg (http://imageshack.us)
And just ro show how low i am, look at the top of the front tire to the fender.
http://img153.imageshack.us/img153/2651/img0333qf4.jpg (http://imageshack.us)

[OptionZero]

1. S14
2. Apexi' N1 Type V
3. 17x9.5 all around
4. Work Emotion XD9
5. +17 all around
6. spacers are weaksauce
7. Falken GRB FK-451: 235/40/17, 245/40/17
8. -3 deg camber F, -3.5 deg camber R, slight toe out front, slight toe in rear
9. Clears my q45 front brakes, supposedly will clear 300ZX brakes
10. hammer rolled front, roll and pull in rear (minor pull, but still took work)

Comments: If I had to do it again, I'd get 235/40/17 in rear as well, should require less neg camber and no pull. Next wheels will be 17x9 +22 for track use.

Pix:
http://img.photobucket.com/albums/v482/OptionAero/New%20Wheels/DSCN1358676x507.jpg

http://img.photobucket.com/albums/v482/OptionAero/New%20Wheels/DSCN1369676x507.jpg

[HerbReal]

1. S13/S14/S15 = S13 hatch
2. Suspension Setup = Megan Racing street coilovers
3. Wheel/Rim Size front & back =19x9/19x10
4. Brand of Wheel/Rim =SSR Vienna
5. Offset front & back = 9+6/10+0
6. Spacer Size =N?A
7. Tire Size front & back =215/35, 225/35
8. Alignment Specs =Toe,Caster is zero and massive 7 degrees of camber
9. Clear Zbrakes & what size brakes =Yes, its stock
10. Fender Modifications: rolled/pulled =flat rolled and slight pull (few MM clearance)
11. Picture=
http://static.flickr.com/52/192259830_71c5d5ce40_b.jpg
http://static.flickr.com/45/192259827_2abef1c607_b.jpg

Herb
[email protected]

[KiDyNomiTe]

Well maybe it should have been bumped, not enough people search for this shit...

Updates!

1. S13
2. STANCE GR+ Pro (F 175mm 9k R: 200mm 7K)
3. Gram Light 57S F 17x9.5 +12 (-3 with spacer) 235/40/17
Gram Light 57S R 18x9.5 +12 235/40/18
Work Equip White R 18x10 +18 235/40/18
8. Camber F = 3.5 R = 2.1
Toe = 0
Caster = 7 degrees
9. Stock Brakes
10. Origin 20mm front fenders, Origin 30mm rear fenders, pushed in for about 15mm of overfenders

http://img.photobucket.com/albums/v293/kidynomite/DSC01151-1.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/lip3.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/dd12alms870.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/dd12alms455.jpg

[MadScientist]

1. S14 Kouki
2. Suspension Setup = Yashio Factory Spec Plus Coilovers (F-10kg/ R-9kg)
Nismo Bushings
Kazama Tie Rod Ends
Tein Tie Rods
Kazama Member Rigid Collars
Tanabe Rear Upper Control Arms
Cusco OS-ALC Strut Tower Bar (Front)
Cusco CB Strut Tower Bar (Rear)
Nismo Power Brace
3. Wheel/Rim Size front & back = (Front - 18x 8.5/ Rear 18x 9.5) (only 17lbs. each)
4. Brand of Wheel/Rim = Advan TCII (Gold)
5. Offset front & back =Front +25/ Rear +29
6. Spacer Size = None as of yet but I may get Yashio Factory 5mm all around... Tire is super close to the Coilovers right now.
7. Tire Size front & back = Advan Neovas AD07 225/40R-18 (Front)/ Yoka ES100 265/35R-18 (Rear)
8. Alignment Specs = None as of yet... still working on Suspension parts.
9. Clear Zbrakes & what size brakes = Yes... Skyline R32 Sumitumo Calipers (The Biggest Stock Caliper without going Brembo). Rear is Full Z32 w/ Drum e-brake.
10. Fender Modifications: rolled/pulled = None yet... I will be rolling the front and rear for better clearance.
11. Picture.. from the side & down the side =
Front Rim & Brake Setup
http://memimage.cardomain.net/member_images/3/web/2187000-2187999/2187570_7_full.jpg
Rear Rims and Brake setup... you can see there is plenty caliper clearance.
http://memimage.cardomain.net/member_images/3/web/2187000-2187999/2187570_9_full.jpg
Side Angle shot from the front...
http://memimage.cardomain.net/member_images/3/web/2187000-2187999/2187570_18_full.jpg

Peace
Drew

[jspecusa]

1. s14
2. JIC FLT A2 D1 spec
3. 18x9 F 18x10 R
4. Wisesport($900 each new)
5. +23mm +23mm
6. +20mm front only
7. 225/40/18F 255/35/18
8. -3F -1R
9. spacer to clear z brake
10. front 10mm s145 IC conversion fenders rear levi spl custom roll
http://www.jspec.com/jspecs145ver2.html
scroll down click on photos for enlargement

[xilicon]

1. S13/S14/S15 = S13
2. Suspension Setup = Tanabe Sevens + pretty much all the battle version suspension arms
3. Wheel/Rim Size front & back = 17x9.5
4. Brand of Wheel/Rim = CST D-Spec
5. Offset front & back = +15 all around
6. Spacer Size = n/a
7. Tire Size front & back = 215/40/17 all around
8. Alignment Specs = -2.5
9. Clear Zbrakes & what size brakes = clears z brakes
10. Fender Modifications: rolled/pulled = rear is rolled
11. Picture.. from the side & down the side = http://i107.photobucket.com/albums/m292/justinsan/DSC03792.jpg
http://i107.photobucket.com/albums/m292/justinsan/DSC03787.jpg
http://i107.photobucket.com/albums/m292/justinsan/DSC03790.jpg

[EAGLE 5]

1. S13/S14/S15 = S14
2. Suspension Setup = K Sport Kontrol Pro Coilovers
3. Wheel/Rim Size front & back = 17x8
4. Brand of Wheel/Rim = König Privat Fahren
5. Offset front & back = +20
6. Spacer Size = none
7. Tire Size front & back = 245/40/17 F&R
8. Alignment Specs = Stock F, -2.2 R
9. Clear Zbrakes & what size brakes = Clears 300ZX 30MM
10. Fender Modifications: rolled/pulled = none
11. Picture.. from the side & down the side =

http://i144.photobucket.com/albums/r176/EAGLE_5_shares/TheS14/carshots/wheelsz.jpg

[bleach8484]

1. S13/S14/S15 = S14
2. Suspension Setup = Tein super drifts, Peak Rucas and no name toe rods
3. Wheel/Rim Size front & back = 18x9 and 18x10
4. Brand of Wheel/Rim = Volk GT-C face2
5. Offset front & back = +38 (+8 w/spacer) front, +5 rear
6. Spacer Size = 30mm in front (project Kics w/hubcentrics)
7. Tire Size front & back = 225/40, and 245/40 Falken 512's
8. Alignment Specs = unknown as of now, "eyeball alignment" :)
9. Clear Zbrakes & what size brakes = clears z brakes
10. Fender Modifications: rolled all around, gonna pull rear tomorrow
11. Picture.. from the side & down the side =

Need to pull it tomorrow and work on the height


http://img.photobucket.com/albums/v335/bleach8484/PICT0028.jpg
http://img.photobucket.com/albums/v335/bleach8484/PICT0026.jpg
http://img.photobucket.com/albums/v335/bleach8484/PICT0027.jpg

[Broadfield]

1. S13/S14/S15 = S13 with aftermarket 5-lug
2. Suspension Setup = Cusco Zero 2E's
3. Wheel/Rim Size front & back = 18x8.5 and 18x10
4. Brand of Wheel/Rim = WedsSport TC-005
5. Offset front & back = Front +32 Rear +44
6. Spacer Size = None
7. Tire Size front & back = Front 245/40 Rear 275/35
8. Alignment Specs =
9. Clear Zbrakes & what size brakes = Front Stoptechs Rear Z32
10. Fender Modifications: rolled/pulled = Rear Rolled
11. Picture.. from the side & down the side =

http://images20.fotki.com/v385/photos/4/47612/3915226/IMG_4266vi-vi.jpg

http://images20.fotki.com/v385/photos/4/47612/3915226/IMG_1176-vi.jpg

http://images20.fotki.com/v384/photos/4/47612/3915226/IMG_4265vi-vi.jpg

[kuruptR]

1. S13/S14/S15 = S13 w/ S14 5 Lug
2. Suspension Setup = Stance GN Pros
3. Wheel/Rim Size front & back = 18x9 and 18x10.5
4. Brand of Wheel/Rim = Fabulous Expand
5. Offset front & back = Front +8 Rear +18
6. Spacer Size = None
7. Tire Size front & back = Front 225/35/18 Back 245/35/18
8. Alignment Specs = Front Spindle mount full negative, with pillowball at 0 Degrees. Rear - 2 to 3 degrees of camber... using a peak performance uca to to push wheel out for clearance
9. Clear Zbrakes & what size brakes = Clears front and rear Z32's
10. Fender Modifications: rolled/pulled = Front: Pulled/Rolled/Hammered Rear: Pulled/Rolled/Hammered.

Notes: I have about 2 mm of clearence with the rear inner fender and zero on the outer... tire wore away inner and outer sides of the tire. Extreme fitment.... I dont recommend this set up on stock fenders :)
Front fits great due to the wicked tire size provided by Toyo (t1-rs), not many companys make that tire size... so the vehicle will go low.

http://www.speedtechracing.com/images/media_cars/15/IMG0975.jpg
http://www.speedtechracing.com/images/media_cars/15/flush.jpg

[dimsumsil80]

1. S13/S14/S15 = s13
2. Suspension Setup = tein flex's w/edfc
tein tie rods
3. Wheel/Rim Size front & back = 17x7f 17x8r
4. Brand of Wheel/Rim =wedsports
5. Offset front & back =+32 all around
6. Spacer Size =none
7. Tire Size front & back =225f 245r
8. Alignment Specs = -1.5 camber iirc
9. Clear Zbrakes & what size brakes = yes. stocks
10. Fender Modifications: rolled/pulled =none
11. Picture.. from the side & down the side
http://i77.photobucket.com/albums/j80/dimsum240/IMAGE_00005.jpg
http://i77.photobucket.com/albums/j80/dimsum240/l_cfa658884618671b087bdf7c9f09ea41.jpg

[apexhumper]

This thread cleared up a ton, a lot closer to understanding what the hell I'm going to get.

[vanish1]

bump bc this thread is really really important

[mig240sx]

Bump & Bump for this thread, buying this month some rims for my 240 and this has help much in my decision. Very helpful, keep the postings going.

[eastcoastS14]

back from the dead...keep this alive, more input plus a sticky would be nice....also amazing looking at so many of your cars 2years ago to now...big changes

specs from the old ride all this getting swapped over this week

1. S13/S14/S15 = S14
2. Suspension Setup = tanabe sustec pro seven << going on today
3. Wheel/Rim Size front & back = 17x9 17x10
4. Brand of Wheel/Rim = 5zigen fn01r-c
5. Offset front & back = +15/ +12
6. Spacer Size =
7. Tire Size front & back = 245/45/17 255/45/17....wheels came with them
8. Alignment Specs =
9. Clear Zbrakes & what size brakes = r33 brakes up front stock rears
10. Fender Modifications: rolled/pulled = rolled
11. Picture.. from the side & down the side =

[vqboodah]

1. S13/S14/S15 = S13
2. Suspension Setup = tanabe pro seven coilovers
3. Wheel/Rim Size front & back = s14 wheels up front 16x6.5 (barely clears my coilovers) NA z32 Rears 16x7.5
4. Brand of Wheel/Rim = OEM wheels
5. Offset front & back = S14 wheels 40+, z32 NA 45+
6. Spacer Size = no spacers
7. Tire Size front & back = 215/50/16, 225/50/16
8. Alignment Specs = -1.5 front, -1.5 rear... not too extreme
9. Clear Zbrakes & what size brakes = clears both z32 front and z32 rears
10. Fender Modifications: none
11. Picture.. from the side & down the side:

only pics i have thats uploaded and they are camera phone pics soo they suck
http://a807.ac-images.myspacecdn.com/images01/32/l_7b6daffe36c6dc5b265f54e121cd1e1e.jpg
http://a828.ac-images.myspacecdn.com/images01/21/l_c7d3ca41a26be8118e5b1028049be603.jpg

[94cc0rd]

bump!!!

This thread is awesome... everybody should post up their wheel specs! and follow the rules!! VERY HELPFUL.

[RUTH'LESSDET]

bump!!!

This thread is awesome... everybody should post up their wheel specs! and follow the rules!! VERY HELPFUL.

you gotta love wheel threads

[AFSil80]

1. S13/S14/S15 = S13
2. Suspension Setup = HKS Hyper D
3. Wheel/Rim Size front & back = 16x7 on all corners
4. Brand of Wheel/Rim = Enkei 92 Mesh (5 lug)
5. Offset front & back = +20 on all corners
6. Spacer Size = None
7. Tire Size front & back = 225/45/16
8. Alignment Specs = -2.0 front, uncorrected rears
9. Clear Zbrakes & what size brakes = Does NOT clear R32 front, currently has stock S13/14 brakes
10. Fender Modifications: None
11. Picture.. from the side & down the side:

Steering wheel was sorta turned in this photo:

http://img.photobucket.com/albums/v601/AFSil80/BlueAndRed.jpg

Kinda blurry. :-/

http://img.photobucket.com/albums/v601/AFSil80/LeftFrontBridge2.jpg

I'll try to get better pics when I get back to my duty station. I'm on leave right now.

[GSXRJJordan]

Bring this thread back!

I was actually just going through some bookmarks, getting info for my setup (17x8.5 +20 all around) and how it's going to fit on an S14 - threads like this can save a LOT of time and headache, and let you flaunt your baller status to the e-world :)

I am really surprised to see so many people with Tanabe Sevens! (I've got a set and rave about them, but as with anything in the 240sx community, it's rare to see lots of people rolling around with top-of-the-line anything).

So, if you've got any kind of nice wheels or fitment, post up!

[Full-Lock]

1. S13/S14/S15 = S14
2. Suspension Setup = Buddy Club Racing Spec Damper
3. Wheel/Rim Size front & back = (F: 18x9) (R: 18x10)
4. Brand of Wheel/Rim = Do-Luck Double Six
5. Offset front & back = (F: +18) (R: +26)
6. Spacer Size = None
7. Tire Size front & back = (F: 235/40/18) (R: 265/35/18)
8. Alignment Specs = Not sure of exact numbers, but ill post it later
9. Clear Zbrakes & what size brakes = clears Z32 TT brakes front and rear
10. Fender Modifications: rear fenders rolled
11. Picture.. from the side & down the side:

next time around i plan going with a 225/40 up front to go a bit lower and space the fronts +5mm

http://i156.photobucket.com/albums/t39/topsecrt88/s14garage.jpg

[samms95s14se]

Big Bumpin this for the 2008! I figure this can still be useful since people could always use suspension info with pictures right? I also added in 12. Over Fenders Brand and mm Size along with 13. Tire Pressure to the list because that info can help people who track their car.

I started thinking that this thread can actually answer a lot of questions I never thought could be answered like you've seen these ones ..... "What coilovers are everyone using" and "Best Rucas, Tie rods, and so on to use" WELL DUH! If there are so many pages and pictures of what people are using what do you think could be the most popular to use? You could almost build stats out of it for fun?
Also if you have posted in here in the past and have a new setup add on to this with your new specs! And you get to whore out some pics too. Just trying to help control new threads and PM sent questions.

1. S13/S14/S15 =
2. Suspension Setup/Brands =
3. Wheel/Rim Size front & back =
4. Brand of Wheel/Rim =
5. Offset front & back =
6. Spacer Size =
7. Tire Size/Brand front & back =
8. Alignment Specs =
9. Clear Zbrakes & what size brakes =
10. Fender Modifications: rolled/pulled =
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size =
13. Tire Pressure front & rear Track/Daily Driving =

[DrtyRat]

If this thread stays alive, it answers so many questions before they are asked. +1 for bringing this thread back!

[brunswick240]

1. S13/S14/S15 = S14
2. Suspension Setup/Brands = D2 Coilovers, Megan Tie-rods (need rucas)
3. Wheel/Rim Size front & back = 16x8J all around
4. Brand of Wheel/Rim = Mitsubishi Starion/Conquest Wheels
5. Offset front & back = -10 front, -10 back
6. Spacer Size = No spacer needed
7. Tire Size/Brand front & back = 225/50/16 Goodyear Eagle AS-1s (or w/e they're called)
8. Alignment Specs = in need of one
9. Clear Zbrakes & what size brakes = nope
10. Fender Modifications: rolled/pulled = front and rear rolled, rear soon to be pulled
11. Picture.. from the side & down the side =
http://i16.photobucket.com/albums/b45/brunswick240/DSCF3418.jpg
http://i16.photobucket.com/albums/b45/brunswick240/DSCF3402-1.jpg
http://i16.photobucket.com/albums/b45/brunswick240/DSCF3406-1.jpg
12. Over Fenders Brand & mm Size = Stock
13. Tire Pressure front & rear Track/Daily Driving = Recommended Tire pressure by tire.

Those were some cheapo tires I got last summer, the front pass. wheel will be fixed and the rears will be newspaper pulled with rucas and all 4 will have 205/45s on them. Will post pics when updated.

[reeskm]

1. S13/S14/S15 = RPS13 ('91 180SX imported from Japan)
2. Suspension Setup/Brands = Megan racing street coilovers, Peak Performance tie rods and ends, Energy Suspension master bushing set
3. Wheel/Rim Size front & back = 17x8 front, 17x9 rear
4. Brand of Wheel/Rim = Volk Racing Evolution III by Rays
5. Offset front & back = +37 all around
6. Spacer Size = none
7. Tire Size/Brand front & back = 235/45/17 front, 255/40/17 rear (now has Kumho Ecsta SPTs all around)
8. Alignment Specs = in spec fronts, rears are out of spec by 1 degree
9. Clear Zbrakes & what size brakes = will clear anything
10. Fender Modifications: rolled/pulled = none. fits surprisingly well.
11. Picture.. from the side & down the side = see below.
12. Over Fenders Brand & mm Size = N/A
13. Tire Pressure front & rear Track/Daily Driving = race tracks here suck. Somebody please build us a decent road course in Calgary!

http://www.ece.ualberta.ca/%7Ereesm/images/in-front-of-house.jpg
http://www.ece.ualberta.ca/%7Ereesm/images/in-front-of-house2.jpg

[KiDyNomiTe]

1. S13/S14/S15 = S13
2. Suspension Setup/Brands = STANCE GR+ Pro; Peak Performance Links
3. Wheel/Rim Size front & back = F: 18x10 R:18x11
4. Brand of Wheel/Rim = Work Equip
5. Offset front & back = F: +10 R: -5
6. Spacer Size = None
7. Tire Size/Brand front & back = Falked K452 F: 225/40 R: 255/35
8. Alignment Specs = Camber F:3.5 R:2.2
9. Clear Zbrakes & what size brakes = Stock
10. Fender Modifications: rolled/pulled = 20mm origin fronts, 50mm origin type 2 rears
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size = 20mm origin fronts, 50mm origin type 2 rears
13. Tire Pressure front & rear Track/Daily Driving = 35 psi

http://img.photobucket.com/albums/v293/kidynomite/simba0012.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/pic2.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/pic1.jpg

[S13SilviaGirl]

I agree....one hell of a bump...but a good one...

[hotlavaflow]

1. S13/S14/S15 = S13
2. Suspension Setup/Brands = TEIN HE/HKS springs/CUSCO pillowballs
3. Wheel/Rim Size front & back = F 17x9 R 17x10
4. Brand of Wheel/Rim = FN01R-C
5. Offset front & back = F +20 R +12
6. Spacer Size = 7mm front spacer
7. Tire Size/Brand front & back = F 215/45/17 R 225/45/17 Federal 595
8. Clear Zbrakes & what size brakes = Yes
9. Fender Modifications: rolled/pulled = front rolled rear pulled slightly

****UPDATE SOON****

2" spacers with ZG flares and alignment specs and pics...

[Maiku240sxS14]

1. S13/S14/S15 = S14
2. Suspension Set-up/Brands = Tein He's Coilovers and Tein Tension Rods
3. Wheel/Rim Size Front & Back = F 17x8 R 17x9
4. Brand of Wheel/Rim = FN01R-C
5. Offset Front & Back = F +25 R +35
6. Spacer Size = None
7. Tire Size/Brand Front & Rear = 225/45/17 all around F Azenis R Hankook
8. Alignment Specs = F -1 Camber, 6 or 7 Caster R -1 Camber
9. Clear ZBrakes & What Size Brakes = Yes
10. Fender Modifications: Rolled/Pulled = None
11. Picture.. from the side & down the side = see below
12. Over Fenders Brand & mm Size = None
13. Tire Pressure front & rear Track/Daily Driving = Track 36-40 all around Daily Driving 40-42 all around

http://img.photobucket.com/albums/v347/nihon_jin/larger%20pix/DSCF0082.jpg
http://img.photobucket.com/albums/v347/nihon_jin/larger%20pix/DSCF0003.jpg
http://img.photobucket.com/albums/v347/nihon_jin/larger%20pix/DSCF0004.jpg

[bigOdom1]

1. S13/S14/S15 = s14
2. Suspension Setup/Brands = GC and koni, cusco ruca and camber plate
3. Wheel/Rim Size front & back = 18x9 18x10
4. Brand of Wheel/Rim =rays gram lights 57s pro
5. Offset front & back =+33front +30rear
6. Spacer Size =none
7. Tire Size/Brand front & back =falken rt615 225/40 255/40
8. Alignment Specs = zero toe
9. Clear Zbrakes & what size brakes = clears bbk
10. Fender Modifications: rolled/pulled =rolled rear
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size =
13. Tire Pressure front & rear Track/Daily Driving =


http://i171.photobucket.com/albums/u283/odomandr/car/jsta240b.jpg

[Trap Star]

1. S14
2. Silkroad RM/A8
3. 17x9
4. Bee*R B5
5. 0
6. 20mm
7. 215/30/17
8. dunno. lol.
9. S15 Brakes
10. None
11.



http://i171.photobucket.com/albums/u292/baconbitz99x/Pur%20Pur/IMG_1400.jpg
http://i171.photobucket.com/albums/u292/baconbitz99x/pic1-1.jpg

Second picture is before I lowered the back to where it is in the first picture.

[nep]

this thread has been invaluable. thanks to everyone who posted!

[silvia_twins]

this thread has been invaluable. thanks to everyone who posted!

I agree 100%:rawk:

[SuicidnS13]

Bump for more setups and pics!!!

[gsracer]

Ive had and fitted a few different setups so ill post specs for each, these are the most basic ones, i want post the 20's lol


1. S13/S14/S15 = s14
2. Suspension Setup/Brands = tein super drift
3. Wheel/Rim Size front & back = F 18 by 9 R 18 by 10
4. Brand of Wheel/Rim = work termist ts2
5. Offset front & back = F +15 R +20
6. Spacer Size = none
7. Tire Size/Brand front & back = Falken azenis rt 615 235 / 255
8. Alignment Specs = zero toe 2 degrees fr 1 degree Rr
9. Clear Zbrakes & what size brakes = z brakes and brembos
10. Fender Modifications: rolled/pulled = F roll R roll
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size = none
13. Tire Pressure front & rear Track/Daily Driving =




http://img.photobucket.com/albums/v344/gsracer/splitter/IMG_0204.jpg

http://img.photobucket.com/albums/v344/gsracer/splitter/IMG_0205.jpg

http://img.photobucket.com/albums/v344/gsracer/IMG_2881.jpg




1. S13/S14/S15 = s14
2. Suspension Setup/Brands = tein super drift
3. Wheel/Rim Size front & back = F 18 by 9.5 R 18 by 10.5
4. Brand of Wheel/Rim = Volk re30
5. Offset front & back = F +15 R +22
6. Spacer Size = none
7. Tire Size/Brand front & back = Kuhmo mx 265 / 295
8. Alignment Specs = zero toe 2 degrees fr 1 degree Rr
9. Clear Zbrakes & what size brakes = z brakes and brembos
10. Fender Modifications: rolled/pulled = F pull R 30mm pull
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size = none
13. Tire Pressure front & rear Track/Daily Driving =



http://img.photobucket.com/albums/v344/gsracer/Jason/IMG_0185.jpg

http://img.photobucket.com/albums/v344/gsracer/Jason/IMG_0184.jpg

http://img.photobucket.com/albums/v344/gsracer/Jason/IMG_0178.jpg






1. S13/S14/S15 = s14
2. Suspension Setup/Brands = tein super drift
3. Wheel/Rim Size front & back = F 18 by 10 R 18 by 11
4. Brand of Wheel/Rim = work meisters S1
5. Offset front & back = F +18 R +18
6. Spacer Size = none
7. Tire Size/Brand front & back = Frnt Falken azenis rt 615 265 / Rear bridgestone potenza so2 295
8. Alignment Specs = zero toe 2 degrees fr 1 degree Rr
9. Clear Zbrakes & what size brakes = z brakes and brembos
10. Fender Modifications: rolled/pulled = F roll R 30mm pull
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size =
13. Tire Pressure front & rear Track/Daily Driving =





http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_0480.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_0498.jpg





1. S13/S14/S15 = s14
2. Suspension Setup/Brands = tein super drift
3. Wheel/Rim Size front & back = F 18 by 10 R 18 by 11
4. Brand of Wheel/Rim = work meisters S1
5. Offset front & back = F +18 R +18
6. Spacer Size = none
7. Tire Size/Brand front & back = Frnt Falken azenis rt 615 F 265/ R 315
8. Alignment Specs = zero toe 2.5 degrees fr 2 degree Rr
9. Clear Zbrakes & what size brakes = z brakes and brembos
10. Fender Modifications: rolled/pulled = none
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size = origin 20mm front 50 mm rear
13. Tire Pressure front & rear Track/Daily Driving =


Not done with this one yet,





http://img.photobucket.com/albums/v344/gsracer/wiring-cage/IMG_5984.jpg

http://img.photobucket.com/albums/v344/gsracer/wiring-cage/IMG_5825.jpg

http://img.photobucket.com/albums/v344/gsracer/wiring-cage/IMG_5821.jpg

[s14dr1ft3r]

This thread should NEVER DIE! It's helpful if you're new to the S-chassis, new to zilvia, or been here a while but switched to a different S-chassis (like me). I'm bringing this back so I can see some more s13 setups (preferably 4-lug). I moved to Japan and switched from s14 zenki to 180sx.

AH AH AH AH STAYIN' ALIVE, STAYIN' ALIVE!

[enkei2k]

bumpppp~! so helpful...this is definitely better than searching thru 100+ pages of the other wheel threads

[Pank]

even though THIS is current, the exact same thread, and didnt need to be bumped.
http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread.html

gg nub

[spencer240sx]

http://i72.photobucket.com/albums/i191/spencer240sx/0916081636.jpg

1. S13
2. tein super drift
3. F 18x8 R18x9.5
4. Tenzo DC6
5. F & R +25
6. F 1.5in R 5mm
7. F 215-30-18 R225-45-18
8. do not know
9. do not know
10. rolled F&R
11.
12. none
13. daily driver

[Automato]

1. S13/S14/S15 = S13
2. Suspension Setup/Brands = Tein springs/KYB AGX Adjustable shocks
3. Wheel/Rim Size front & back = F 18x8/R 18x8
4. Brand of Wheel/Rim = OEM G35 Coupe
5. Offset front & back = F +30mm, R +30mm
6. Spacer Size = n/a
7. Tire Size/Brand front & back = BFGoodrich GeForce Sports, F 245/40/18, R 255/35/18
8. Alignment Specs = n/a
9. Clear Zbrakes & what size brakes = yes, z32 brakes
10. Fender Modifications: rolled/pulled = rolled http://img.photobucket.com/albums/v624/Automato/IMG_0624Small.jpg
http://img.photobucket.com/albums/v624/Automato/IMG_0627Small.jpg http://img.photobucket.com/albums/v624/Automato/img_5998Small.jpg

http://img.photobucket.com/albums/v624/Automato/flr-autox-20080921-img_4287.jpg

[samms95s14se]

Ain't nothing but B thang Baby...(Bump that is) for 2009! I almost forgot about my yearly thread revival!! Plus all of the missing information from the Wheel Whore Thread recently reminded me to bump this, and people not understanding about the slamness qualifications to post in that thread. So if you don't qualify now's your chance to post that setup in here!! Oh and this one is different and started two years earlier.

Formula Reminder: Just added # 14 Lip size front & back

1. S13/S14/S15 =
2. Suspension Setup/Brands =
3. Wheel/Rim Size front & back =
4. Brand of Wheel/Rim =
5. Offset front & back =
6. Spacer Size =
7. Tire Size/Brand front & back =
8. Alignment Specs =
9. Clear Zbrakes & what size brakes =
10. Fender Modifications: rolled/pulled =
11. Picture.. from the side & down the side =
12. Over Fenders Brand & mm Size =
13. Tire Pressure front & rear Track/Daily Driving =
14. Lip size front & Back =

[ZenkiS1423457891626]

Not done with this one yet,





http://img.photobucket.com/albums/v344/gsracer/wiring-cage/IMG_5984.jpg

http://img.photobucket.com/albums/v344/gsracer/wiring-cage/IMG_5825.jpg

http://img.photobucket.com/albums/v344/gsracer/wiring-cage/IMG_5821.jpg


Fender specs please. I have looked everywhere maybe I'm blind?

[s15specR]

Need some more pics of a s14 rear running 18*9.5 (+20 to +15) with a 265/35/18 without over fenders, posted in pic request thread but got no hits.

Thanks in advance.

[gordonliu]

No pics ATM, but I will update

1) s13
2) megan street, RUCA, SPL tie rod ends, PDM spherical endlinks...
3) front: s14 se alloys 16/6.5 +40 with yokohama advan sports 205/45
REAR: z32 N/A alloys 16/7 +45 I think, with yokohama AVS ES100 245/45 (yes, they are too wide)

NOTE: z32 wheels DO NOT CLEAR my front suspension. the rim/tire touches the spring perch of the coilover IN THE FRONT. I am pretty sure that this would happen even if the tires were streched (like 195s).

I would need spacers for the front.

I say this because it may prevent someone making my mistake (trying to put z32 wheels on an s13 with z32 brakes).

4) given
5) +40 and +45 I believe
6) none
7) yokohama both
8)-.5 FRONT and -1.5 rear (did not adjust the front yet).

NOTE if I ran more agressive camber in the front, it would make it even more difficult to fit the z32 wheels on the front, as the tilted wheel would impact the coilover to an even greater degree.

9) the current set up DOES clear z- brakes and coilovers.

note that z32 wheel FRONT will not clear COILOVERS on an s13.

10) none
11) none at the moment
12) none
13) not sure, but between 35 and 40.
14) not sure

[shreeveco]

this thread is sick. but, rather than just bumping it, i guess i'll give a little too. i know, i know, they're sportmaxes and they suck. but, i promise i didn't know everyone had them until soon after i got them. (southern oregon might as well be a cave) anyway, on with the specs...

1. S13/S14/S15 = s13 (all stock metal)

2. Suspension Setup/Brands = megan street coilovers w/ megan rucas r - maxed f - still not low enough

3. Wheel/Rim Size front & back = f/r - 15x8

4. Brand of Wheel/Rim = xxr :(

5. Offset front & back = f/r +-0

6. Spacer Size = f - none (need 5-10mm) r - 30mm

7. Tire Size/Brand front & back = f/r - 195/60 bridgestone potenza re92

8. Alignment Specs = f - -2.5 r - -4

9. Clear Zbrakes & what size brakes = won't clear z brakes, but will clear q45 front brakes

10. Fender Modifications: rolled/pulled = f - hammered flat r - rolled and pulled

11. Picture.. from the side & down the side = don't have any with this setup directly from side

http://i190.photobucket.com/albums/z136/shreeveco69/butthole.jpg

http://i190.photobucket.com/albums/z136/shreeveco69/butthole2.jpg

12. Over Fenders Brand & mm Size = none

13. Tire Pressure front & rear Track/Daily Driving = track[f - 35 r - 60] dd [f - 35 r - 35]

14. Lip size front & Back = not enough (3.5 inches)

[WIKID S4TEEN]

Bump for more setups and pics!!!

What he said back in 2008. Bump for more setups and pics!!!

And don't fuck this up like the Fitment thread with BS posting n shit! :rl:

So far, it's a good thread with heplful info, also, someone bump this shit in 2 yrs from now, when it dies again.:coold:

[samms95s14se]

This should have been a sticky a long time ago but no Mods put it there? Instead some other crap thread was made as a sticky and that thread is all bullshit post with no formula to post specs with. So if you want this thread to still provide a benefit to 240 owners post up your stuff!

[wh0aitznic0]

Why the fuck does this exist when there's a much better wheel fitment thread stickied.

[samms95s14se]

To anyone else that is also missing the point. Showing wheel fitment is different than explaining wheel fitment with specs and pics! Just posting a picture and saying you have 18's doesn't help anyone out when they don't know what combination of stuff you used and the specs on it to get it to look and fit that way ;)

[Kaizen.]

RIMTUCK.com - Wheel Fitment Database (http://www.rimtuck.com)