Post Your Seat Setup!!!!!

[brianglawson]

Ok im looking to work on my interior some... especially since im getting an ls1 fbody for an everday driver.. i can afford to have my interior taken apart for a while... but anyway... this thread is dedicated to posting your seat setup's
please post:

Seat Company
Rail Company
Cost
How it sits
Opinion of seat

(1)
Nissan S14 Seats
Nissan Rails
$150
like stock
great, but a little big on me... bland looks though
http://www.imagestation.com/picture/sraid166/pfe00007130a4e74fa08fcd5784113157/f44adc8a.jpg

(2)
Recaro Speed
Nissan Rail, custom modded
$550
tad higher than stock, sits kinda crooked due to bracket flaws
seat is comfortable and great for hard driving... but i want something a little less aggressive for everyday driving
http://www.imagestation.com/picture/sraid166/p018414b668656de99c8750ea989c2816/f44adc92.jpg

[zenkiticks]

currently running stock s14 in an s14...awaiting a metal shop to fab my bride fg rails to run a sparco evo2.

[Andrew Bohan]

http://guernsey.globat.com/~mountainracer.com/pics/driftaholic/seats015.jpg

bride pros. used my stock rails, slightly modified. sits lower than bride bottom-mount rails

[Dousan_PG]

bride zeig bucket
fg rails
way lower the stock adjustable height setting (3 way front and rear)

bride brix
bride brix rail
lower then stock

bride buckets are all pretty much the same, side mount sit low no problems w/ clearance

[DJPimpFlex]

Bride Zeta III Type L
Bride rails

Fit is awsome and super low. I'm 6' 210lbs and its almost perfect.

Price is steep. Over $1000 with rails and shipping.

[bobafett]

http://digitalsurrender.com/cars/images/240parts4.jpg

thats my only pic, doesnt show how high they site.


seats: corbeau A4
rails: stock corbeau
height: too high to be comfortable
overall: wish i bought buckets or bottom mount
total cost: $720 shipped for everything (rails and seats)

fiance's look when u tell her u need to buy different racing seats.......... priceless

[SequenceGarage]

Bride ZETA III (FIA Approved)
Bride FG Rails with dremeled out brackets and washers under the drivers side rear mounting hole
Cost: look it up, cheapest i found was on hopupracing

The seat sits slightly twisted - rear drivers side of the seat lower and further out. The rear drivers side still needs to come up just a touch, and then the brackets just need to slide over to the right a little more, moreso the rear brackets than the fronts. I'm only talking about half a cm here or so, nothing huge.

http://www.sequence-garage.com/forums/uploads/post-19-1108155402.jpg

[zenkiticks]

i know in an S14 Bride says the driver's side rail is 15mm off center, or closer to the door.

[HaLo]

Recaro SR3 bottom-mount seat
Bride Seat rail with custom adapter

Fits nicely, a tad higher that stock... Very comfortable for street driving, perfect fit for track whoring.. ;)
I might be looking to invest on a bucket seat now. ;)

[BOMEX180]

ChargeSpeed carbon kevlar bucket seat(FOR SALE)
Bride Type FG rails/brackets w/ side mounts

Seats will be replaced with the new Bride GIAS this coming June(2month wait)
http://nissaninfiniticlub.net/photopost/data/500/11954new_seats_005-med.jpg

[2JZGTE]

Bride ZetaIII (FIA :eek3d: )
Bride FX bracket (non-slider aluminum version of FG bracket)

Still waiting on my bracket, [email protected]#ch to get. The seat should be sitting with the bottom nearly touching the ground.

billy

[givmesumadat]

currently running stock s14 in an s14...awaiting a metal shop to fab my bride fg rails to run a sparco evo2.

pm'd unless you want to answer it here. what needs to be done to get an evo2 seat into the FG rails?

[SequenceGarage]

i know in an S14 Bride says the driver's side rail is 15mm off center, or closer to the door.

That sounds about right.

[JDMs13]

[QUOTE=BOMEX180]ChargeSpeed carbon kevlar bucket seat(FOR SALE)
Bride Type FG rails/brackets w/ side mounts

Pm'd you about that seat. Answer wherever you feel like it.

[BOMEX180]

[QUOTE=BOMEX180]ChargeSpeed carbon kevlar bucket seat(FOR SALE)
Bride Type FG rails/brackets w/ side mounts

Pm'd you about that seat. Answer wherever you feel like it.

PMed you back, hope i answered all your questions...

[racer98]

Recaro SRD, but the bracket makes it sit a little too high,

[wootwoot]

s14 seats in s13 because I'm cheap and want to get Recaro SRD's eventually and could never handle stock seats for even a ride to the store.

[sultan]

S15, position like stock. definately better than my nasty torn up brown S13 seats.
http://home.comcast.net/~mbruni13/seatsin1.jpg

[S14DB]

Nissan S14 Leather Seats
Nissan Rails
Came with the car
I don't know why people say they slide around in them. I do a little in the passenger seat but I stick like glue in the drivers. Stock seatbelt sucks. I need a CGlock or something.

[91CRXsiR]

S14 Black Leather Seats
Nissan Rails
Bought em at a junkyard
Holds me pretty tight not sliding but im a big guy so skinny azz might have some trouble

[JDMark]

http://img.photobucket.com/albums/v640/Blimit/e2258c64.jpg

Sparco Sprint
custom rail (by a local race shop)
about an inch lower then stock, holds overall good, wish shoulders and hips were tighter.
came out to around 400 dollars

-mark

[zenkiticks]

holds overall good, wish shoulders and hips were tighter.

you'll need a harness to stay put in a seat like that, depending on your size.


givmesumadat
pm'd unless you want to answer it here. what needs to be done to get an evo2 seat into the FG rails?
pm'd you back.

[hotrodv]

I plan to put a new seat soon on my S14, obviously in Italy there no one rail for nissan..
I think to buy a recaro Pole position, anyone know if I can use maybe abride rail or something else??
http://www.recaro-seats.co.uk/pictures/p23-184_2.jpg

[zenkiticks]

I plan to put a new seat soon on my S14, obviously in Italy there no one rail for nissan..
I think to buy a recaro Pole position, anyone know if I can use maybe abride rail or something else??
http://www.recaro-seats.co.uk/pictures/p23-184_2.jpg
i imagine you could use a bride bucket rail as long as your recaro is comparably as narrow as a bride bucket.

[SequenceGarage]

i imagine you could use a bride bucket rail as long as your recaro is comparably as narrow as a bride bucket.

Brides have a fair bit of adjustment as far as width goes, the spacing between teh front and rear holes on the seat may be a factor, worst case you just drill new holes in the rail.

[hotrodv]

Is the FG Rails centered or as I read is 15 mm to the right??

[mixedwell]

stock s13 seats! sits just about stock.... it came with the car. no tears... is that a bonus or somthing?

i have 3 SRDs... one pair from a 98 Integra Type R.. and the other just holds the cell phone. which rails do you guys prefer? i want them low and comfy. i would search, but you are all here.

[twong85]

Buddy Club Bucket
Sparco Sidemount(not the newer version)
Sits same as stock but front pad pushes legs higher

Trading to the discontinued Bride FO sidemount soon. Not sure if it will sit lower or not(does anyone know?)

[s13silvia03]

I have an R32 seat
http://memimage.cardomain.net/member_images/10/web/502000-502999/502218_115_full.jpg
sits a tad higher than stock, hell of alot more comfortable
Rails: stock R32 rails
Cost: $41.00

[The ROMAN]

Custom Ultrashield seat = $240
Bride MO rails (too wide for side mounts) = $175
Sits the same height as stock I think. I'm 6'2" and I still clear the roof with a helmet on...barely.
It holds me in place great but gets a little uncomfortable on long trips. An RJS harness is on the way.

http://www.imagestation.com/picture/sraid167/p2d96d9cd594147469460037520475122/f43f0759.jpg

http://www.imagestation.com/picture/sraid167/p91bb70321033c2a2a8e5838d1f463bef/f43f0771.jpg

[BOMEX180]

Is the FG Rails centered or as I read is 15 mm to the right??


Seems like its 15mm to the right. I used to have the zeta 3's and then switched to ChargeSpeed. The charge speeds shoulder bolster is hitting the door. I didnt have any problems my zeta's

[SilviaDriver]

was wondering can anybody post the dimensions of the bride fg rail for s14?

need dimensions to make my own bracket, going broke, can only make my own stuff now, cant buy anything anymore

[Dousan_PG]

nm
fgs on my s14 is fine
when you install just push seat all the right and it lines up a-ok
people install it outside the car tighten it down then
should install and tighten in car

[93 240sxfastback]

nm
fgs on my s14 is fine
when you install just push seat all the right and it lines up a-ok
people install it outside the car tighten it down then
should install and tighten in car

Yup stock it sits way too the left for me. I set the adjusters all the way to the right and it lines up great.

I plan to put a new seat soon on my S14, obviously in Italy there no one rail for nissan..
I think to buy a recaro Pole position, anyone know if I can use maybe abride rail or something else??


I use a Recaro SPG seat in my car with bride fg rails. Works perfectly. Here's a pic.

[r-b-x]

r32 gtr seat. sits a little higher and my knee hits the steering column a bit more so i have to set it a little further back than optimal. firmer than the saggy stock ones i had but much better support. nice material too.
http://www3.telus.net/whf/gtr-seat-001.jpg
3 or the 4 bolt holes line up and the last one is a little short so my ghetto solution for last bolt is a large washer. woulda been a pain if the rail was longer...
http://www3.telus.net/whf/gtr-seat-003.jpg

[zenkiticks]

was wondering can anybody post the dimensions of the bride fg rail for s14?

need dimensions to make my own bracket, going broke, can only make my own stuff now, cant buy anything anymore
since i bought mine, i probably can't help you out there.

[SilviaDriver]

since i bought mine, i probably can't help you out there.

then you just wasted a shitload of money on something so simple to create.

[zenkiticks]

not a shitload by any means, but why should i help you mooch off of me? call bride, maybe they'll fax it right over....

[SilviaDriver]

not a shitload by any means, but why should i help you mooch off of me? call bride, maybe they'll fax it right over....

who said YOU needed to help?

[wootwoot]

Then get the fuck off this site you prick. Come on here to brag about what you have but are not willing to help people. Just rub in the fact that you have it, paid for it, but wont help because you are a shithead. If I was a mod I would be so tempted to ban you for that.

[KOUKI KA-T]

not a shitload by any means, but why should i help you mooch off of me? call bride, maybe they'll fax it right over....

Ohh what a cool guy.
Well at least you contributed by letting us all know that you bought one....
Dink

[MakotoS13]

2 corbeau A4's.

http://www.makotoseven.com/240/level1/black1.jpg

they fit well. i may have them resurfaced with some better material, though.

[sr240mike]

Are those custom brackets Makoto?

[s14srpilot]

then you just wasted a shitload of money on something so simple to create.

Seat brackets and seatbelts are what hold you in your car if you get into an accident. Only piss poor ghetto ass ricers waste what little pennies they have on wacked ass looks (such as s15 conversions) and as a result can't afford to turbo their ka or swap in an sr OR buy brackets for their imitation bride seats. Here's a hint: You gotta pay to play and you gotta work to get paid.

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wODQ0MTQwNnM0MTNkZmQzMXk1NDE%3D.jpg

[SilviaDriver]

Seat brackets and seatbelts are what hold you in your car if you get into an accident. Only piss poor ghetto ass ricers waste what little pennies they have on wacked ass looks (such as s15 conversions) and as a result can't afford to turbo their ka or swap in an sr OR buy brackets for their imitation bride seats. Here's a hint: You gotta pay to play and you gotta work to get paid.

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wODQ0MTQwNnM0MTNkZmQzMXk1NDE%3D.jpg


HAHAHAHAHAHAHAHAHAHA...you still bitter lil woman? you think i dont know what holds me to my car? you paid watever for metal to be welded together, you think i dont know people who can weld it for me for free? hahaha only piss poor ghetto ass ricers waste money on stuff? i can say the same about those wheels my friend hahahaha.

i gotta pay to play, yes thats why you are showing off fake bride seats, and gay q's emblem?


son, do yourself a favor and stfu before you embarrass youreslf. please stop posting pics of ur ugly ass ride.

[zenkiticks]

who said YOU needed to help?
read my post again retard, it was a simple statement, trust me when i say i felt no obligation to help you whatsoever.

[vvtisupra]

sparco sprint with bolt in bracket no slider = lower than stock and noone wants to drive your car and noone fux with the slider position. 115 with seat FIA approved =) thanks fujiwara

[zenkiticks]

Come on here to brag about what you have but are not willing to help people.
did i brag, no? if this was a question about good wheel fitment, or a better way to mount a fmic, i would gladly give some advice or suggestions. but give away the schematics to the rail that i just paid for??? hmmm... you're a real brain.

Just rub in the fact that you have it, paid for it, but wont help because you are a shithead.
if you feel upset because you cannot find one to buy, copy, or purchase you need to get a fucking life. you are obviously the shithead here. next time don't try so hard to ruffle people's feathers, it makes you look like a little bastard.

[zenkiticks]

Ohh what a cool guy.
Well at least you contributed by letting us all know that you bought one....
Dink
your contribution here has been great. thanks and keep on wasting space.
cool guy? seriously dude, what the fuck is your deal? do you know me? do you know of me? did you think you are funny by making random posts? your ill-attempted sarcasm is a wasted effort and should be left behind somewhere.

[zenkiticks]

sparco sprint with bolt in bracket no slider = lower than stock and noone wants to drive your car and noone fux with the slider position. 115 with seat FIA approved =) thanks fujiwara
bottom ount seat lower than stock? hmm S13 or S14?

[Dousan_PG]

BRIDE MAXIS
lower then stock. WAY lower
love it. LOVE it

http://i2.photobucket.com/albums/y9/dousan_pg/s14_new/DSC02873.jpg
http://i2.photobucket.com/albums/y9/dousan_pg/DSC00576.jpg

dont mind the mess (ineither pic). newer pics later..

[revat619]

dude, you always have badass seats! A brix back in the day, then zeig, now this!

you and Brian, i hate you both! :D In all seriousness though, that seat is NICE. I sat in Brian's car....LOVED it.

I'm probably gonna end up with a zeta 2 pretty soon, but you wouldnt happen to know what the zeta 2 neos is would you? Is it wider or smaller than the regular one?

[Dousan_PG]

brians is better, ZERO better for taller folk..its the seat Taniguchi used to use. MAXIS is smaller but not ridiculously
i love it though. wish it was red. came w/ a badass backcover too..

yeah i love the bride seat,s nothng but VEYR high quality from the ones ive down
BRIX (2times, borrowed 1), ZETAII, ZEIG, MAXIS.
lindsay has a ZetaII typeL
brian has Zeros/ERGO

im up for a BRIX passegener next. comfy supportive cant find that in US seats for the most part, i hate reclineable seats, and none comes as close to a bucket as a older BRIX (I) model does.

the cool back cover that came w/ the MAXIS

http://i2.photobucket.com/albums/y9/dousan_pg/s14_new/DSC02875.jpg

and more..
dont mind the mess

http://i2.photobucket.com/albums/y9/dousan_pg/s14_new/DSC02874.jpg

[nismo2491]

I've got two polythylene jegs racing seats w/ pedestal mount. they are fixed but I don't care, I'm the only one driving the car.

[zenkiticks]

http://i2.photobucket.com/albums/y9/dousan_pg/s14_new/DSC02874.jpg
that seat looks badass....i don't even want to know what that set you back...

[aaronyoung]

Cobuea forza DS mounted directly to the seat bracket (no slider)
PS is mounted to the bracket with the slider. it is about a 3/4 height difference. IMO the DS is still a tad too high to fit comfortably with a helmet (@6'1" tall 220lbs)
here is a front shot to show the height difference...
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wODgwMDQwNnM0MTNkZmQzMXk1NDE%3D.jpg

[s14srpilot]

HAHAHAHAHAHAHAHAHAHA...you still bitter lil woman? you think i dont know what holds me to my car? you paid watever for metal to be welded together, you think i dont know people who can weld it for me for free? hahaha only piss poor ghetto ass ricers waste money on stuff? i can say the same about those wheels my friend hahahaha.

i gotta pay to play, yes thats why you are showing off fake bride seats, and gay q's emblem?


son, do yourself a favor and stfu before you embarrass youreslf. please stop posting pics of ur ugly ass ride.

Wow you are even too stupid to tell that the seat and rail are genuine and made by Bride. I'm not a piss poor cheap ass fuck like you who loves to talk shit because she is bitter because she can't afford the real deal. Do you even HAVE WHEELS? What motor do you have? If you have stock se wheels and a ka you need to stfu. I'M SCARED of you!!! :bowrofl:

[pruto]

this thread has turned into a pissing contest

i used zeta 2 with fg driver
and ergo on passenger.

used to have zeta 2 on both sides, but i needed the back seat room to store shit driving to the track.

[Dousan_PG]

zenkikicks
only $737
its like brand new. back cover was an option in the 150 dollar range
seat new was like 1500 range
headrest included on seat

so i dont think it was that bad.
its a great seat, shoulders dont even move, im stuck in there and its sooo comfy, its great. cant go wrong

the best thing about BRIDE seats, they are EXTRMELY comfortable. ive tried some of the sparco and the are either TOO plush (feels like sitting on a pillow) or rock hard, imo

[nlzmo400r]

got an r32 GTR seat on the way, $400 shipped, and from what i hear, you get badass OEM quality, and a good hold (although im sure its nothing like these bride's that most of you guys have, I just didnt have $700)

[SilviaDriver]

Wow you are even too stupid to tell that the seat and rail are genuine and made by Bride. I'm not a piss poor cheap ass fuck like you who loves to talk shit because she is bitter because she can't afford the real deal. Do you even HAVE WHEELS? What motor do you have? If you have stock se wheels and a ka you need to stfu. I'M SCARED of you!!! :bowrofl:

greanted they are real or fake, dont expect people to know with the shitty photo skills you have.

also are you sure IM the one thats bitter? becuz im not, last time i checked you came in here quoting me acting like a lil woman. i have a KA, so does heartwork, so does ieatrice. whats you rpoint? nope i dont have se wheels. i dont need to afford 2 bride seats, wast the pont of that? your butt lovin husband gonna take a ride with you too?

i guess having an SR makes you big baller? haha i dont even want that motor.

funny how you say im bitter when obviously its you from the last time i made you stfu in Johny5's VS-KF thread. you being so angry and crying like a little baby girl, you decided to PM me with your weak insults



If you reply to this it will be DELETED.


go pop your moms tit back in your mouth cry baby. you wouldnt imagin how hard i cracked the fuck up showing that to johny5. call me bitter when you posted a thrad and got pinked for "in before the lock" haha woman

http://www.lovetoparty.co.nz/images/Fairy%20Girl%20Plates.JPG

the newbies over at 240sxforums flame harder than you. meh for dimensions, measuing this weekend

eh done with this thread. was fun.

[SochBAT]

In Before the Lock!

:lockd: :lockd: :lockd: :lockd: :lockd:

Hey, wondering, does anyone have bent S13 stock seats? i've heard that they arepretty good for ghetto bucketseats. Wanted to see if i could do it myself. My junky seats got holes on both side supports, so the metal burns my arms like hell. Looks like i just got beat with a whip. :hammer:

[S14DB]

SilviaDriver&s14srpilot would you stop ethuging it out before I have to pink yah?