17 x 10 +18 will they fit the s14?

[initial s14]

the car is not lowered that much but just 1.7 front and 1.4 rear of regular struts and springs. it didnt specify if its 10 all around. i am hoping that there is an 8 somewhere for the front. but if they fit, will there be a big issue of rolling fenders to the max? will stretching the tires compensate this matter? oh well, this is the rim.


http://www.geocities.com/mr2pogi/panagold.jpg

[Ian]

you might have alot of trouble with that spring/strut combo

alot of times, the low offset wide wheels fit ok cuz they're combined w/ stiff coilovers and height/camber adjustability

[Maeda]

fronts would be tricky, can be done
but i wouldnt do it
i would personally go no larger then 9.5 +12 front, but thats me

in rear EASY fit
hammering, some pulling somehammering and some camba
easy
i have 17x10+20 but still got some room after hammering for the 18x9.5+12 rears now i needspacer. d'oh

-dousan_pg on maeda's computador

[chmercer]

shit where did you find thoes panas? that shits baller

[Ritz S14]

fronts would be tricky, can be done
but i wouldnt do it
i would personally go no larger then 9.5 +12 front, but thats me

in rear EASY fit
hammering, some pulling somehammering and some camba
easy
i have 17x10+20 but still got some room after hammering for the 18x9.5+12 rears now i needspacer. d'oh

-dousan_pg on maeda's computador

Bah, you don't have to pull the rears for those. Just roll it. But of course, pulling is always nice :drool:

[DoriftoSlut]

i dont retarded camber like some do
i wont change my setup to FIT wheels.
i'll adjust around it.\

-dousan_pg
still using other people's computers