PDA

View Full Version : My H.U.D. is crap!!!


coolerow
03-29-2002, 03:34 PM
I dont know whats wrong with my Heads Up Display. It turns on for the first 2-3 seconds of ignition, then shuts completely off. I've took out the cluster to check any faulty connections but couldn't find any. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>
All my fuses are good, as well. I dont know if its the cluster that's bad now, faulty sensor(next to tranny), or ?

SOMEBODY HELP ME. HELP ME PLEASE! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/butbut.gif" border="0" valign="absmiddle" alt=':but:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>

S13Grl
03-29-2002, 05:00 PM
Again, this is a tech question


I had the same problem on my old '91 coupe. The unit itself was faulty. I also took my cluster apart and checked all the fuses quite a few times and didn't find anything wrong.

You might need a whole new unit, and it costs some $400 or so to replace.

"Camppain" from our site had a similar problem on his '89 coupe, you might wanna message him and see what exactly happened to him... I think that his wasn't on at all, ever... not sure.

Good luck!

camppain
03-30-2002, 11:34 PM
that would be me!

and yes ive fixed it and no problems whatsoever a simple break in the wire.

also looking at the wires wont show anything try using a multimeter and doing a continuity test

need more help lemme know