PDA

View Full Version : s14-s13 VLSD swap mount question


drk_drftr
03-28-2005, 08:20 PM
I already have a vlsd from a 92' s13, it's getting worn out so I got another diff from my friend, his was out of a 95' s14.

Will i need to make any modifications to the s14 diff to fit in my s13? Or does it just bolt up? The front mounting holes are huge, like an inch around, i'm assuming this is where i need to press in my stock bushings but im not sure.....

The Hamsterball
03-28-2005, 08:58 PM
No. You don't press in your stock bushings.

Just swap differential rear covers.

And, go buy some thick washers and longer mounting bolts.
(the bolt goes through the washer, and the washer is what is below the S14 differential mounts.
So technically it's being held up by washers.)

If you want the specific dimensions of the bolts/washers that you need, go here:
http://ka24development.com/vlsd.html


I'm in a good mood right now..

So next time, search you dimwit.

drk_drftr
03-28-2005, 09:11 PM
i'll be sure to search next time lol thx