What is this sensor for???,,,5 speed swap help..

[guillermo corro]

Hi, i reaf some faq´s to do my 5 speed swap, but i still have one problem, hope that someone can help me ebcause i´m confused,, i read this link,, for the electrical conections,.

http://www.ka24development.com/cwilfert/S14_tranny_swap_electrical.html

but on that link, he never mencion anything about the sensor that is down the neutral position sensor.. and i dont know what is that for where should i plug it or what, right now i think that i already have a problem because i guess that probably that sensor was on the same harrnes that the automatic tranny, because there was a conector on the auto tranny harness that plugs n that sensor,, but i read the fsm´s for both trannys and is not mencioned,, hope someone can help,, i´ll try t attach a picture if i cannot upload it, hope you unerstand it,, thanks a lot GC.

[NemeGuero]

it's the speed sensor and the plug should be exactly the same as long as your tranny is the same to your motor (s13 with s13, s14 with s14)

[guillermo corro]

Ho, Sh**!!... i cut the plugg!!!!!,... well,, hehe tomorrow i´ll search for the wires, because i cut them near the starter... and yes,, the plug fits in there, but i taught that the wires were diferent,, thanks a lot man, i´ll check that tomorrow,, and how is your swap man?,, did you finish it?, or start it?,, there are some parts for s13 where i get the pedal and some other parts, laters.. GC.

[NemeGuero]

yah I finished it.. well mostly.. the driveshaft will be here wednesday and then everythings done. I started her up yesterday and everything was cool.
yah, and splice those wires back together and you should be good.

[SochBAT]

hey neme, how did you do your reverse light? I know that to start the car you must splice the two wires on the passenger side. Not sure about teh reverse. You should take some detailed pictures.

[NemeGuero]

i have a ton of pictures and when everythings done I was going to compile a walk-through. if you have any specific questions email me. For the wiring just follow the info on this link, it's step by step everything.

http://ka24development.com/cwilfert/S14_tranny_swap_electrical.html

I made my own lower harness from the sensors and an s13 harness. came out good

-Evan