Clutch and brake pedal assembly swap

[s14ajk]

my new project car '95 S14 came with an 'automagic' tranny to solve the tranny issues and lack of power - I purchased a Zenki S14 SR20 clip, I figured that I would have all the parts necessary for the swap.

Can I use the JDM clutch pedal/master cylinder? (I know about the lines)
Can I also use the JDM brake pedal assembly?
If the JDM clutch pedal will work but the brake pedal does not, will I be able to simply cut the brake pedal down and use only the clutch?

wiring wise do I have to follow all the steps of the auto to 5spd or is it more straight forward, by using the JDM fusebox?

any insight on these issues is more then appriceated. thanks

[the head]

1. clutch M/C works on S13 I have never done an S14 but I would assume it is the same

2. just cut down the stock pedal it is easier and takes FAR less time than trying to change out the brake pedal assembly

3. stick with USDM wiring search on here the last auto/manual thread had a link to the S14 auto/manual wiring changes