z32 caliper bracket

[BrazyMstrP]

hey all,

I was wondering if someone had extra z32 calipers laying around, if they could measure the distance from the mounting holes from center to center. I have a subaru and was told that the z32s were the same as the old skool sti (non usdm) calipers. I know for sure the pads and hardware are the same, but I'm not too sure about the actual castings.

If in fact they are the same, that means that the subaru brakes can be made to fit the nissans as well. So technically the stock wrx brakes would be pretty equivalent to the q45 2 piston swap. and then if that's the case you could use the newer sti brembos.

So if someone can feed me this info that would be dope. Thanks

-Jack

[boosteds13]

and then if that's the case you could use the newer sti brembos.

So if someone can feed me this info that would be dope. Thanks

-Jack

We can already use the 350Z Brembos :)

[BrazyMstrP]

kinda OT, but are the new sentra brembos as big as the z brembos?

[sxse240]

Mounting holes are 100 mm center to center.

[thx247]

How much do the wrx brakes cost? Cheaper than 180 brakes?

[BrazyMstrP]

I let some stock calipers that I had laying around go for about 100 bucks with the rotors, calipers, lines, and brackets.

I wish I tried putting those on the s13 before I let them go, now that I think about it.

[SilviaDriver]

We can already use the 350Z Brembos :)

and dont forget skyline gtr brembos F/R