sil80forme
02-23-2005, 09:55 PM
ok heres my problem, i am switching from hud to analog, well when i got the analog cluster the harness was cut, but they did send both pieces, the 3 plugs that go to back of cluster and the other half which are 2 sub harnesses, tonight i wired all of the wires up correctly but came to a snag, on the back of the gauge cluster there are 3 connectors, well 2 of them got the same yellow w/ green stipe and red w/ black stripe, and so do the sub harness so i dunno which goes where, ok the 2 harnesses on the backof the gauge cluster that have the same wires are, the left side, and the right side, all i need to know is which side goes to what sub harness? for example does the left side cluster harness go to the white sub harness or black? thanx i hope this explains what i need and i hope siomeone can help me out.