PDA

View Full Version : Good EBC


JimmyJames
02-05-2005, 01:16 PM
As of today, I'm officially sick and tired of completely re-tuning my Greddy Profec B Spec 2 anytime the weather decides to change a little. If it were a small adjustment everytime, that'd be fine. But my settings were fine for 14psi in 40 degree temps (set: 53%, gain:16%, start boost: .76kpa), but in 50 degree temps, boost spikes and wavers until settling on 12psi. I make a few adjustments, raise, then lower the set and gain, nothing helps.

I don't believe my turbo is bad, because with the controller off I make 7-8psi no problem, and I can tune the controller to give me 10 psi, but 14 isn't workable.

So now I've decided to either go with a different EBC, or try a manual one and see how I like that. Opinions on different EBC's are welcome.

JimmyJames
02-06-2005, 11:01 AM
Lil' bump

MESSAGE LENGTH

WeldingHank
02-06-2005, 01:02 PM
you will have a harder time with an MBC, and you won't have nearly the same spool up. most any EBC will send you through this hassle.