Need help installing HID's

[SilviaSR20DET]

This is on a 96 240sx, i got the mchulloch hid kit and havning trouble with the two black and white wires that attach to the harness. Which of the three slots do i slide it into? Right now i have the black on top and the white on the right slot. IS this correct cause it seems like itll work in other ways. I need help asap thanks.

[nrg]

Please throw your HID kit away. You're going to do more harm than good.
There are more to HID technology than pluging them in and calling it a day.
HID in halogen housing will cause glare, blind on coming traffic and create poor cutoff.

www.hidplanet.com will teach you and show you the light about HID.

[RBS14]

And to boot, running HID off of stock wiring harness will cause it to fail and can even cause a fire (very rare, but plausible). You need a custom harness, or you will fry your stock harness. On startup, HID draws ~13 amps for a few seconds, while halogen only draws ~7. Stock wiring harness/system will handle it for a while, but ultimately will fail. Sell your kit while you can, and do it over again, right.