PDA

View Full Version : Swap Finished, There are some pictures.


xcye12
01-09-2005, 08:38 PM
SR20DET S13 98 blacktop engine.
S14 95 240sx USDM chasis.

Note: I have to switch the water temp senser to make the USDM gauge work correctly. I am not sure if the senser on the SR is broken or the spec is different from that of USDM KA24DE.
http://members.shaw.ca/xcye/doneEngine1.JPG
http://members.shaw.ca/xcye/doneEngine2.JPG
http://members.shaw.ca/xcye/gauge1.JPG

mr_240sx
01-09-2005, 08:40 PM
clean looking swap man!!!

TokyoNights
01-09-2005, 09:04 PM
You need a s14 ka temp sensor

s14xman
01-09-2005, 09:19 PM
those are some big ass pictures man

kuruptR
01-09-2005, 10:01 PM
if you want your car to run better.. you should get rid of that mini filter and put a hose from there to the intake arm.

mrmephistopheles
01-09-2005, 10:59 PM
you need to use S14 coolant temp sensor. the one from your KA will work just fine.