Does anyone have pictures of...

[WanganKin]

Gram light 57s wheels on their car? If so can I see them? I am going to purchase a set. I am probably going to order 9.5JX17 +22off. However the front sticks out a tad. Does anyone have any pictures of this size or the 8.5J-X17 any offset on their car that they can show me? It is going on a S14. But I wouldnt mind seeing S13 pictures as well.

Thanks, :love:

Jonathan.

p.s. sorry if this is in the wrong section of the board.

[Dousan_PG]

fronts at 17x9.5 +22 WONT clear coilovers

meme posted his online a while back...SEARCH

[Heartwork]

fronts at 17x9.5 +22 WONT clear coilovers

meme posted his online a while back...SEARCH

it fits on my friends S14 with HKS Hipermax 2's
225-40-17 tires

[KOUKI KA-T]

They clear some coilovers, like the KTS ones, but only if you run a 225 tire. iEATrice has pics on here of bronze 57s in 17x9.5 +22 front and rear (not the pics where he test fitted Heartwork's gold ones) and I don't think he was using spacers. I think he had Cusco coilovers but I can't remember for sure. I have the pic saved at home and I'll post it later, (at work now)

EDIT: I see Heartwork posted while I was postign this, so maybe it was HKS coilovers and not cusco's, if he's talking about iEATrice

[meme]

the bad thing with 17x8.5 is you get face 1. looks flat, no curve.

i have 18x9.5 +22. i use 10mm spacer for the rear so it is +12 in the rear now.
this looks perfect. 245/40/18REAR ; 235/40/18FRONT

my coilover has a short mount plates(shorter then usual). but i am not sure if coilovers like Tien,cusco,d2 would have the same problem. but i think it would be ok.

http://wasabigarage.com/img/pics/project/gramlight_57s/100_0001.JPG

http://wasabigarage.com/img/pics/project/gramlight_57s/100_0004.JPG

[OptionZero]

How bout running a 20mm front fender, 17x9.5 +12 in front w/ 235...less camber needed, more clearance...then just rolll the rear, run 17x9.5 + 22 w/ 255!

problem solved, eh? All the benefits of big rubber, coilover clearance, with SUNKEN SPOKES!

Flat face just doesn't feel the same...

[ZK]

Flat face just doesn't feel the same...

I'm feeling that...

Anyone know what disk is what for the 57Pros? I think they go by disk A,B,C... is C the deepest one?

http://www.rayswheels.co.jp/cgi-bin/cgi/english/sizeGuide.cgi?modelName=57PRO

[KOUKI KA-T]

Here ya go, 17x9.5 +22 57s front and rear. Tein coilovers, no spacers, 225-45 front and 235-45 rear. (courtesy of iEATrice, NOT MY CAR) Enjoy...
http://www.imagestation.com/picture/sraid107/p44c3ab613fe0870cb510b2c14436bf82/f95e810f.jpg
http://www.imagestation.com/picture/sraid107/p9afd54e0af734a85b176751a0a368fc4/f95e8109.jpg
http://www.imagestation.com/picture/sraid107/p48c04a62c559f527c81bd61eee83da7f/f95e8114.jpg

[pruto]

yeah, coilover fitment depends on the coilover and the design of the bracket. Apexi N1s clear stock wheels =p

http://www-scf.usc.edu/~paulli/rearquarter.jpg

thats my car, the fronts are essentially 17x8.5 + 10 (+35 with 25mm spacer) with 215/45/17s.

i would go with the 9.5 +22 all around, =p

[revat619]

I'm feeling that...

Anyone know what disk is what for the 57Pros? I think they go by disk A,B,C... is C the deepest one?

http://www.rayswheels.co.jp/cgi-bin/cgi/english/sizeGuide.cgi?modelName=57PRO

Yeah C disk is the lowest.

its like this...

A = High disk = minimum lip/maximum brake clearance
B = Medium/Standard disk = medium lip/medium brake clearance
C = Low disk = maximum lip/minimum brake clearance

For 57Pros on a 240, go with B disk in the front and C disk in the rear.

Hope that helps. :bow: