What work needed for S14 SR into an S13 Hatch?

[sepulchral]

1992 240sx se hatchback

what work will be needed to swap in an s14 sr20det, and will the s14's radiator fit?

Will the driveshaft fit?
I know wiring will be difficult, any diagrams on that?


Anything you know will help, thank you. Michael

[rps13_fastback]

1992 240sx se hatchback

what work will be needed to swap in an s14 sr20det, and will the s14's radiator fit?

Will the driveshaft fit?
I know wiring will be difficult, any diagrams on that?


Anything you know will help, thank you. Michael

I swapped a 98 s14 sr20det in my 92 SE hatch. used the stock driveshaft. used the s14 radiator, it fits pefectly, just the upper mounts must be fabbed (i just drilled new holes into the rad support). wiring is basically the same as an s13.. same wires but different location. for my swap, the s14 i/c piping sat kinda weird and the hood now doesn't close all the way (it closes but sticks up). other than that it's pretty much the same as an s13 swap. the hot pipe also goes from the side of the car instead of through the top along with the cold pipe. you can either drill a hole on the side or get an s13 hotpipe. i think that's it