1993 300zx TT MC ???

[pqsoccerboy17]

i've been talking to nlzmo400r about buying a fully rebuilt MC off of a 1993 300zx TT, and i wanted to know the size before i purchased it from him...the only problem is that he doesnt seem to know and either do i....heres a link to the pictures he sent me Link (http://eshare.hpphoto.com/en/home/welcome.asp?JobID=0fd3c363-e93a-43ca-b519-5988f266d696&IDKey=1366791980)
by the way i'm plaining on putting this on my 1992 none abs 240 with only 300zx front brake upgrade

thanks,
mike

[pqsoccerboy17]

does anyone know???

[old_s13]

its bigger than the crap small one you have on your car right now, what else do you need to know?

the Z32 came with 2 different sized ones, i think they decreased size around 93 or so.

BOTTOM LINE: you cant use ANY of them because you still have your stock rear brakes. bias will be OFF.

[FRpilot]

three sizes i believes. 16/17. 17/17 (1''), and 17/16 (1 1/16"). the nabco one bolts on but you have to get a flaire fitting from the an old mc, clutch mc, or where. or you can use the tokico one but you have to get your brake hardlines reflared with vw ones.

oh yea. the 16/17'' and 1'' 1/16'' ones are sometimes etched on the mc. i dont think the 1'' ones are etched.

[biggie]

The 1 inch ones were etched too. I don't see anything on that one, it would be on the passenger side under the rear resevior connection.

The 17/16" was only on '90 Z32s I believe.

[pqsoccerboy17]

ok thanks guys...and old s13- i know im not going to be putting on the brakes yet, i thought it though and i'm just going to part together my brake kit and eventually get the rears and put them and the MC on at the same time

[biggie]

I'm running Z brakes up front and 17/16ths MC and haven't noticed any problems. Maybe its just me though.

[old_s13]

I'm running Z brakes up front and 17/16ths MC and haven't noticed any problems. Maybe its just me though.

thats because your rear brakes arent working hard enough to notice a damn thing

[sr_sil80]

the 93 should be the 1"