drnovascotia
12-07-2004, 05:28 PM
Alright, after many an hour talking on 240sx and bugging the hell out of welding hank, I'm going all for the CA swap. That being said, I'm needing quite a few parts:
Located in Concord, NH
1. S13 Shell Preferably Manual
2. 2 12" Fans off like a SE-R or whatever, or even the taurus 3.8L dual speed fan
3. SR20DET T25 - Prefer one in great shape, but willing to get one rebuilt
4. Good shape S14 radiator. Don't want to risk a old s13 one ,and S14 is bigger, or a newer S13 one would do
4. S13 Hotpipe
5. Redline Tranny Fluid MT90
6. IC Piping - 2 2.25" 90deg bends
2 2.5" 180deg bends
1 3 Foot section of each 2.5 and 2.25 piping
7. like 6 feet of Small Heater Hose
8. BOV - No preference
9. Bunch of odds and ends, I'll remember them all soon enough
THANKS IN ADVANCE
[email protected]
Dr.
Located in Concord, NH
1. S13 Shell Preferably Manual
2. 2 12" Fans off like a SE-R or whatever, or even the taurus 3.8L dual speed fan
3. SR20DET T25 - Prefer one in great shape, but willing to get one rebuilt
4. Good shape S14 radiator. Don't want to risk a old s13 one ,and S14 is bigger, or a newer S13 one would do
4. S13 Hotpipe
5. Redline Tranny Fluid MT90
6. IC Piping - 2 2.25" 90deg bends
2 2.5" 180deg bends
1 3 Foot section of each 2.5 and 2.25 piping
7. like 6 feet of Small Heater Hose
8. BOV - No preference
9. Bunch of odds and ends, I'll remember them all soon enough
THANKS IN ADVANCE
[email protected]
Dr.