S14 RUCA ramoval problem...

[Diabel]

I am trying to swap my stock RUCAs with the adjustable ones. I can't remove the inner bolt (the one that adjusts the camber). I took the nut off and bolt turns all the way around but I can't remove it, it's stuck. Didn't have any issues with the outer one...

Does it have to be in any special position to come out or do I just hammer the hell out of it?

THX

[Dousan_PG]

it has a notch on it and should slide thru that
if your ruca bolt is all messed up yeah hammer it out but it takes awhile
ive had mine stuck numerous times just takes some good ol elbow grease and a BFH

[projectRDM]

The last time it was aligned the mechanic overtightened the bolt, now the backing washer has spun out of the groove in the bolt. Only way to get it out is prying and beating.

Do yourself a favor and replace it with a standard bolt, with larger washers to keep it centered. Since you're installing an adjustable arm you no longer need the OE adjustment.

[Diabel]

Thank you for your help. I'll give it a try.

[TurK]

fuck im having the same problem....and hammering doesnt seem to be helping ?!?!?! damn it

[TurK]

DONE......HAMMER TIME Baby!