kelz240
12-23-2020, 09:14 PM
hey guys, didnt know where to post this but im having a clutch problem.
just swapped this sr20det in my 89 hatch, finally got it running! I put a new slave cylinder on, bled it properly. Pushes the fork smoothly but when the car is running it wont go into any gear. Turn car off and it goes into every gear smoothly. So i started the car in first gear and it started normal, car didnt jump or move but when i let the clutch out maybe a 1/8 of and inch it jumps forward and takes off. master cylinder looks fine, but i was thinking about replacing it and running the SS line from the master to the slave. Anything else i should be looking at to fix this?
thanks in advance for everyones time and info!
just swapped this sr20det in my 89 hatch, finally got it running! I put a new slave cylinder on, bled it properly. Pushes the fork smoothly but when the car is running it wont go into any gear. Turn car off and it goes into every gear smoothly. So i started the car in first gear and it started normal, car didnt jump or move but when i let the clutch out maybe a 1/8 of and inch it jumps forward and takes off. master cylinder looks fine, but i was thinking about replacing it and running the SS line from the master to the slave. Anything else i should be looking at to fix this?
thanks in advance for everyones time and info!