S14 rear/S13 front in R32

[SupaDoopa]

So while I rebuild my S14a Silvia, I have my R32 on the lift next to it. I have the rear end built for both of these. The S14 is obviously keeping the rear it came with fully rebuilt/braced and I'm using conversion bushings for the R32 to accept the S14 rear end for better anti-squat and such.

Now, there are people out there that are doing S13 front end swaps on the R32. I know there is limited write-ups but all it seems to need as far as fabrication is drilling a new location to accept the S-chassic coil. Everything else for the most part is a bolt-on affair. Does anyone have experience with an actual write-up or information regarding the swap? There was a gentleman on Facebook I was talking to about it but he stopped responding so maybe all the angle he gained killed him. I'm just looking to have a place that will have a well-documented write-up now that this chassis is popular and easily obtainable in the states. Driftworks made a 'kind of' write up but not really.

[S14rebuild]

Seems pretty basic, just drilln the proper holes for the upper coilover mount could be a pain

https://youtu.be/7EHFanlkYxQ

Guy has a few vids docu. Some of the work

[SupaDoopa]

I watched it and actually borrowed a S13 strut tower bar set up to do the drilling. Driftworks also has some shit pictures too and a semi-walk though. I'm considering doing an active write up on both the S14 rear end swap and the S13 front end swap. I also will be doing S13 coils all the way around. It should make for an interesting setup.

[S14rebuild]

def in for that swap....funny years back full-race adopted the GTR r-chassis rwd to s-chassis. Now ur going the other way...wanna see awsome angle!