r20crazy
07-27-2020, 06:50 PM
LOCAL pickup prefered 90501, but will ship for additional. Shipping will not include rotors (local pickup will) as you can buy new for cheaper than shipping costs.
SOLD. Paypal add the 5%.
I have this kit I compiled, all it needs is the master cylinder pigtail or rig it up yourself (as far as i know). All parts are new, never test fit unless stated. been in my garage and never gonna do the swap. All new parts were bought from RockAuto. except bleeders and DIF conversion lines
includes:
- new in box Centric caliper seal kits, Centric hardware kit, and Centric master cylinder (see part numbers for details).
- New Russel speed Bleaders. pair
- New DIF conversion lines to s13 (assume fit s14 a well)
- USED 3rd brake fitting (not installed)
- IRON 300zx 30mm(will confirm, been a while) brake calipers (sumitomo). these were USED, disassembled (not split) and cleaned in parts washer b4 painted with rattlecan brake paint (never burnt in). there are some chips from being moved around. red letters also brake paint done by hand. this was done about 2 years ago and never put seals/pistons back in. (would rcmd scotchbrite bores b4 assembly). Caliper pistons are used, and each is labeled in individual bag as to where they came from (new seal kit was to be used) see pic
- New Stoptech brake pads (see pic for specs)
-5 lug rotors (pair) (unknown brand, not drilled/slotted) looked new b4 I used them to hold down pop-up tent outside (I can measure). RUSTED and need a good cleaning but included with local pickup ONLY. you can get a better set cheaper than shipping would be from 88rotors. Rotors not pictured
PM me for questions, will consider offers.
https://i.imgur.com/Z3qz3u2l.jpg
https://i.imgur.com/7SVDx4Hl.jpg
https://i.imgur.com/tCafXyPl.jpg
https://i.imgur.com/6LG60Gol.jpg
https://i.imgur.com/13TYASMl.jpg
https://i.imgur.com/AeTa3yol.jpg
https://i.imgur.com/KiAsJRYl.jpg
https://i.imgur.com/JwUMpH4l.jpg
https://i.imgur.com/e4gqjHMl.jpg
SOLD. Paypal add the 5%.
I have this kit I compiled, all it needs is the master cylinder pigtail or rig it up yourself (as far as i know). All parts are new, never test fit unless stated. been in my garage and never gonna do the swap. All new parts were bought from RockAuto. except bleeders and DIF conversion lines
includes:
- new in box Centric caliper seal kits, Centric hardware kit, and Centric master cylinder (see part numbers for details).
- New Russel speed Bleaders. pair
- New DIF conversion lines to s13 (assume fit s14 a well)
- USED 3rd brake fitting (not installed)
- IRON 300zx 30mm(will confirm, been a while) brake calipers (sumitomo). these were USED, disassembled (not split) and cleaned in parts washer b4 painted with rattlecan brake paint (never burnt in). there are some chips from being moved around. red letters also brake paint done by hand. this was done about 2 years ago and never put seals/pistons back in. (would rcmd scotchbrite bores b4 assembly). Caliper pistons are used, and each is labeled in individual bag as to where they came from (new seal kit was to be used) see pic
- New Stoptech brake pads (see pic for specs)
-5 lug rotors (pair) (unknown brand, not drilled/slotted) looked new b4 I used them to hold down pop-up tent outside (I can measure). RUSTED and need a good cleaning but included with local pickup ONLY. you can get a better set cheaper than shipping would be from 88rotors. Rotors not pictured
PM me for questions, will consider offers.
https://i.imgur.com/Z3qz3u2l.jpg
https://i.imgur.com/7SVDx4Hl.jpg
https://i.imgur.com/tCafXyPl.jpg
https://i.imgur.com/6LG60Gol.jpg
https://i.imgur.com/13TYASMl.jpg
https://i.imgur.com/AeTa3yol.jpg
https://i.imgur.com/KiAsJRYl.jpg
https://i.imgur.com/JwUMpH4l.jpg
https://i.imgur.com/e4gqjHMl.jpg