Signal Light's not working after tapping into switched 12v

[unicoder]

I tapped into the switched 12v for the hazard button, and the turn signals quit working, I set it back to the way it was and they still do not work.

I replaced the turn signal switch unit, as well as checked the fuses with no success.

Any ideas of what actually may have broken?

[NukeKS14]

https://i.ibb.co/9rmLrpG/EL1.jpg (https://ibb.co/Krckr5m)
https://i.ibb.co/MMDJYt6/EL2.jpg (https://ibb.co/QrFx2Td)
https://i.ibb.co/2ZGTQwh/EL3.jpg (https://ibb.co/TW9sSZ2)
https://i.ibb.co/yQ94j5B/EL4.jpg (https://ibb.co/DRJr2kg)

[unicoder]

omg, I have been beating my head against the wall on this since NukeKS14's reply 2 weeks ago.

thanks for the diagram, it helped a lot, turns out the problem is with my eyes, i couldnt tell the diff between the green/white and green/yellow, got it all figured out!

[NukeKS14]

Glad you stuck with it. Electrical problems are some of my least favorite to deal with and some of the most frequent on this chassis.

https://www.nicoclub.com/archives/use-nicoclub-coms-factory-service-manual-database.html

Grab an FSM for your car. They're extremely well written and very comprehensive.