PDA

View Full Version : Jon's 180 Style S13


rogues13
04-29-2020, 06:17 PM
Hey everybody! Thought I'd write up a thread on my S13 I purchased from the original owner last year.

Here are some photos as it came. Completely stock, 170k miles, no rust, and a single cam KA.

https://i.imgur.com/uPSCxOEl.jpg

https://i.imgur.com/36Sdj9wl.jpg

After bringing it home I installed a full set of Kouki 180sx seats (front and rear), a brand new Nardi Classic 330, and an old school Nismo shift knob.

https://i.imgur.com/08mNTjul.jpg

https://i.imgur.com/osOk8Ksl.jpg

On a family vacation to Daytona beach, a full set of brand new Kouki tail lights and garnish came up for sale, so I scooped those up for a great price new in box while I was in the area. I removed the OEM rear wing and wiper and welded the holes shut. (Garnish will be paint matched in the future don't worry.)

https://i.imgur.com/5ybSdDXl.jpg

https://i.imgur.com/SdwQoh8l.jpg

https://i.imgur.com/1fGTGMil.jpg

Drove the car like this for a few months while I was home for summer, and decided to do some interior refreshing.

My holy grail: mint condition Nismo 330F with a BNIB horn button.

https://i.imgur.com/BnZd6Btl.jpg

0 km Nismo 180sx Cluster.

https://i.imgur.com/Cs2BHxkl.jpg

Used some of Broadfield's old posts to refurbish my steering Column surround using SEM texture and color coat.

https://i.imgur.com/nU6WZG0l.jpg

Bought a brand new set of stalks from RockAuto. The difference these make really is crazy.

https://i.imgur.com/wIvjLu0l.jpg

Need to get some more photos but here is one of the wheel mounted up to my Nismo Hub and WorksBell QR. Took the cluster surround off after this and molded in my Pivot RHU-M but will get some more photos for this in a second post.

https://i.imgur.com/5eOHQxwl.jpg

Thanks everyone for looking! I will post again after this is accepted.

Fuglychuki91
04-30-2020, 06:41 PM
Hell yeah dude. I sold you the spare skirts I had a good while ago haha. Keen to see the progress!

austinth0rnt0n
04-30-2020, 10:28 PM
love to see the progress, and a new thread on zilvia. great work jon!

tuzzio
05-01-2020, 08:03 AM
Saw your SEM post on reddit. Nice to see people restoring these cars. I need to scoop those stalks, bad.

Thursday7
05-01-2020, 05:17 PM
I was gonna say, I've definitely seen at least two white 180s with kouki tail lights and a black garnish in one thread.

Also in for updates.

JrDarknes
05-02-2020, 12:45 AM
Going to have to buy a spare column and try that out. That looks very nice

rogues13
08-17-2020, 04:56 PM
I'm back with an update. Car is under construction and since I'm in school away from home I've been working on this side project.

I got a pivot RHU-M in a trade a while back and wanted to graft it into the cluster surround to make it look as OEM as possible.

First I cut out the left button section.

https://i.imgur.com/bH2yWFJl.jpg

Next, I centered and cut out a target to build a holding bracket for the controller as shown here:

https://i.imgur.com/MHwsOlkl.jpg

I then built a tight tolerance box from ABS that the Pivot sits in snug (if I need a fastener in the future I will use a command strip on the bottom but for now I plan to let it rest inside because it holds very well.

https://i.imgur.com/sRellhql.jpg

https://i.imgur.com/HoRkIgTl.jpg

Next came bridging the bracket into the surround. I wanted this part to be all ABS so it would be solid and not prone to any cracking if bent or under load for any reason.

https://i.imgur.com/TWoocqCl.jpg

https://i.imgur.com/GzT28XPl.jpg

https://i.imgur.com/1db3OpCl.jpg


I then blocked off the channel I had created after some sanding, and began the finishing with some filler.

https://i.imgur.com/fApKVh2l.jpg

https://i.imgur.com/G0nFNLql.jpg

https://i.imgur.com/86ftPxYl.jpg

https://i.imgur.com/IT9NV1gl.jpg

After this I sprayed some plastic primer and applied SEM color coat black. I am pretty happy with the result but may apply another coat of SEM depending on how it looks in the sun.

https://i.imgur.com/loPMMIbl.jpg

Will have another update soon this time as I have been collecting more parts and making more progress. Few sneak peaks for the time being:

https://i.imgur.com/XagqktAl.jpg

https://i.imgur.com/f71JlTAl.jpg

https://i.imgur.com/n7SNCwul.jpg

https://i.imgur.com/VJFMjNll.jpg

https://i.imgur.com/9MtZigZl.jpg

https://i.imgur.com/lRKwPhtl.jpg

https://i.imgur.com/LXS0cKRl.jpg

Thanks all for reading.